Loctite 985246 User manual

Henkel Americas Henkel Europe Henkel Asia Pacific
1-800-LOCTITE +49.89.320800.1800 +86.21.2891.8863
www.equipment.loctite.com www.henkel.com/industrial www.henkel.com/industrial
Document # 985284, Rev E, Date: 06/05/2014
Equipment Instruction Sheet
490 ml Manual Applicator
Item No. 985246
Locating Tab Release Catch
Plunger
Ratio Selector
Cartridge Tray
Dual Cartridge
Static Mix Nozzle
Retaining Nut Ejection Button
The applicator is fully assembled and ready to
dispense 10:1 dual cartridges.
On the 490 ml Manual Applicator select ratio. For
extended use, counterbalancing of applicator is
recommended.
1. Retract Plunger
Press release catch and fully retract plunger.
2. Insert dual cartridge
Insert dual cartridge into cartridge tray, ensuring
that the locating tab slides into groove. Push
down until locked into position.
3. Install static mix nozzle
To remove plug from cartridge, leave metal clip
in place and unscrew retaining nut. Install mix
nozzle (sold separately) on cartridge and secure
in place with retaining nut. Dispense product by
squeezing trigger. When dispensing is complete,
press release catch to relieve pressure.
Note: If dispensing is restricted, product may be
cured in static mix nozzle. Replace nozzle.
4. Removal of cartridge
Press release catch and fully retract plunger.
Press ejection button on cartridge tray.
Replacement Parts & Accessories Part No.
10:1 Cartridge Tray Replacement 985286
4:1 Cartridge Tray Conversion Kit 984211

Henkel Americas Henkel Europe Henkel Asia Pacific
1-800-LOCTITE +49.89.320800.1800 +86.21.2891.8863
www.equipment.loctite.com www.henkel.com/industrial www.henkel.com/industrial
Document # 985284, Rev E, Date: 06/05/2014
Equipment Instruction Sheet
490 ml Manual Applicator
Item No. 985246
Warranty
Henkel expressly warrants that all products referred to in this Instruction Manual for the 985246 490 ml Manual Applicator
(hereafter called “Products”) shall be free from defects in materials and workmanship. Liability for Henkel shall be limited, as its
option, to replacing those Products which are shown to be defective in either materials or workmanship or to credit the purchaser
the amount of the purchase price thereof (plus freight and insurance charges paid therefor by the user). The purchaser’s sole and
exclusive remedy for breach of warranty shall be such replacement or credit.
A claim of defect in materials or workmanship in any Products shall be allowed only when it is submitted in writing within one
month after discovery of the defect or after the time the defect should reasonably have been discovered and in any event, within
(12) months after the delivery of the Products to the purchaser. This warranty does not apply to perishable items, such as fuses,
filters, lights, etc.. No such claim shall be allowed in respect of products which have been neglected or improperly stored,
transported, handled, installed, connected, operated, used or maintained. In the event of unauthorized modification of the Products
including, where products, parts or attachments for use in connection with the Products are available from Henkel, the use of
products, parts or attachments which are not manufactured by Henkel, no claim shall be allowed.
No Products shall be returned to Henkel for any reason without prior written approval from Henkel. Products shall be returned
freight prepaid, in accordance with instructions from Henkel.
NO WARRANTY IS EXTENDED TO ANY EQUIPMENT WHICH HAS BEEN ALTERED, MISUSED, NEGLECTED, OR
DAMAGED BY ACCIDENT.
EXCEPT FOR THE EXPRESS WARRANTY CONTAINED IN THIS SECTION, HENKEL MAKES NO WARRANTY OF
ANY KIND WHATSOEVER, EXPRESS OR IMPLIED, WITH RESPECT TO THE PRODUCTS.
ALL WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND OTHER WARRANTIES
OF WHATEVER KIND (INCLUDING AGAINST PATENT OR TRADEMARK INFRINGEMENT) ARE HEREBY
DISCLAIMED BY HENKEL AND WAIVED BY THE PURCHASER.
THIS SECTION SETS FORTH EXCLUSIVELY ALL OF LIABILITY FOR HENKEL TO THE PURCHASER IN
CONTRACT, IN TORT OR OTHERWISE IN THE EVENT OF DEFECTIVE PRODUCTS.
WITHOUT LIMITATION OF THE FOREGOING, TO THE FULLEST EXTENT POSSIBLE UNDER APPLICABLE LAWS,
HENKEL EXPRESSLY DISCLAIMS ANY LIABILITY WHATSOEVER FOR ANY DAMAGES INCURRED DIRECTLY OR
INDIRECTLY IN CONNECTION WITH THE SALE OR USE OF, OR OTHERWISE IN CONNECTION WITH, THE
PRODUCTS, INCLUDING, WITHOUT LIMITATION, LOSS OF PROFITS AND SPECIAL, INDIRECT OR
CONSEQUENTIAL DAMAGES, WHETHER CAUSED BY NEGLIGENCE FROM HENKEL OR OTHERWISE.