Logitech CRAYON Use and care manual

PREPARE THE MATERIALS
• Logitech Crayon(s)
• Computer:
Operating System Mac PC
Language for operating system High Sierra or above Windows 10 or above
INSTALL THE LOGITECH CRAYON FIRMWARE UPDATE SOFTWARE
• Go to support page of Logitech Crayon, download
the software that supports your computer and operating system
http://support.logitech.com/en_us/product/crayon/downloads.
• Follow the instructions to install the software.
CONNECT LOGITECH CRAYON TO YOUR COMPUTER WITH THE LIGHTNING CABLE
• Optional - For multiple Logitech Crayons, connect Crayons to a USB hub and then
connect USB hub to your computer.
• Once the connection between the computer and Logitech Crayon(s) is established,
follow the instructions on the computer to complete the rmware update.
LOGITECH CRAYON
HOW TO UPDATE FIRMWARE

OTHER TIPS
• Make sure your computer has stable internet connection and is connected to a power
source during the rmware update process.
• The LED light on Logitech Crayon will be yellow when the rmware is updating. The
LED light will change to green when the rmware update is done. The rmware update
software will use the same color scheme.
• If the update is interrupted for any reason (ex: power shuts o, lost connection to
computer, etc), simply re-connect Crayon to the computer and proceed following the
steps above.