Logitech G935 User manual

Wireless 7.1 LIGHTSYNC
Gaming Headset
Casque gaming sans l 7.1
LIGHTSYNC
User Manual
Manuel
de l’utilisateur
G935
M/N: A-00079, A-00080

CONTENTS
English . . . . . . . . . . . . . . . . . . .3
Français . . . . . . . . . . . . . . . . . 19
Español . . . . . . . . . . . . . . . . . 35
Português . . . . . . . . . . . . . . . . 51
www.logitech.com/support/g935

3ENGLISH
WHAT’S IN THE BOX
1. G935 Gaming Headset
2. Custom tags (L/R)
3. Charging cable (USB to Micro-USB, 2m)
4. 3.5mm cable (1.5m)
1
2 2 3
4

4ENGLISH
FEATURES
1. Adjustable padded leatherette
headband
2. Removable backlit custom tags
3. Boom mic mute indicator LED
4. Retractable boom microphone
Automatically mutes in “up” position
5. Lighting zones (G logo + light strip)
6. Wipeable leatherette earpads
7. Wireless On/O switch
8. Pro-G Audio Drivers
9. Programmable buttons (G1/G2/G3)
10. Battery housed in earcup
11. Microphone Mute
12. Volume Wheel
13. 3.5mm
(mobile) connection
14. USB charging connection
15. USB Wireless Adapter
1
8
7
9
11
12
13
14
4
5
3
2
6
10
15
3.5mm

5ENGLISH
1. Wireless On/O switch
2. G3 (programmable):
Default equalizer (EQ) cycle
• Will cycle through EQ settings
in Logitech G HUB software
3. G2 (programmable): Default surround
sound on/o
4. G1 (programmable): Lighting cycle
• Will cycle through lighting settings
in Logitech G HUB Software, including:
breathing, solid cyan, custom, and o
5. Microphone mute
6. Volume wheel
G1, G2, and G3 are programmable
using the Logitech G HUB Software
(in PC mode only):
www.logitech.com/support/g935
Note: Buttons and volume wheel only operate
in Wireless On mode. Some buttons and features
may require PC connection and Logitech G
HUB Software.
HEADSET BUTTON LAYOUT
1
2
3
4
5
6

6ENGLISH
BATTERY MANAGEMENT
G935 wireless headset is powered via
a battery housed in the right earcup.
When you are not using your G935 wireless
headset, plug it in via the USB port on the
bottom of the unit to charge. When fully
depleted, the battery takes approximately
3.5 hours to reach full charge on standard
USB output. For the optimal experience,
plug in your unit and allow it to charge fully
before rst use.
Logitech G HUB Software
The home screen in Logitech
G HUB Software has a battery charge
level indicator:
When using battery, this will indicate
charge level
This indicates the unit is charging
Critical Battery Warning
G935 gaming headset will play a tone
at low charge. The headset’s lighting will
also dim when at low charge. At critical
charge level, the unit will play a tone and
lighting will turn o. Use USB charging
cable to plug in headset immediately
if you hear these tones to ensure
uninterrupted listening or gaming.
Charge indicator

7ENGLISH
G935 will go into sleep mode to conserve
battery power when it has not received
an audio signal in 15 minutes.
In idle sleep mode, the unit’s lighting will
change to the breathing mode, and it will
disconnect from the USB wireless adapter.
Your G935 will wake up from sleep mode
if you press a button on the headset.
After 30 minutes in sleep mode
your headset will fully power o in order
to conserve your battery. In order to wake
up your headset you will need to move the
power switch to the o position and then
back to the on position. If you plan to leave
your headset idle for an extended period
of time, turn o your headset and plug it
in via USB to charge.
When your headset is turned on, it will play
a tone to indicate that your headset has
turned on. The lights will perform a power
on light cycle sequence, then switch to
the currently selected lighting.
When the unit is turned o, lights will
switch to blue and fade out while
it powers down.
IDLE SLEEP MODE ON/OFF TONES AND LIGHTS

8ENGLISH
WIRELESS ON/OFF
G935 has two operation modes,
Wireless On, and Wireless O.
Wireless On
In Wireless On mode, most headset
features are available,
1including custom
sound proles, RGB lighting, microphone,
mic mute, wireless, and audio mixing.
When battery charge is low, lighting will
dim and low battery notication tone will
play. When battery charge level is critical,
lighting will turn o.
Wireless range2
Indoor: 15 meters
Battery life3
No lighting: 12 hours
Default lighting: 8 hours
1 Some features may require Logitech G HUB Software.
2 Range may vary with environmental conditions.
3 Rechargeable batteries have a limited number of charge cycles.
Battery life measured at 50% volume.
ON

9ENGLISH
Wireless O (passive mode)
In Wireless O (passive mode),
your headset will operate in passive
unpowered mode. Your headset will play
audio from any device connected through
the 3.5mm input on the headset.
Features that require power,
including 7.1 surround sound,
custom sound proles, on-headset
buttons, volume wheel operation,
and button/lighting customization
functions are not available in this mode.
Boom mic is not available for devices
connected through the on-headset 3.5mm
audio port in this mode.
This mode can be used to preserve
battery life.
OFF

10 ENGLISH
SETUP FOR PC PC MODE
1. Download and install Logitech G HUB:
www.logitech.com/support/g935
2. Set switch to Wireless On postition.
3. Connect USB Wireless Adapter to PC.
Headset will automatically connect.
Mixing audio sources
While connected via USB Wireless Adapter,
the G935 can also use the 3.5mm cable
to connect to another audio source
(ex. smartphone). Both audio sources
can be played simultaneously.
USB
ON
1
2
3