Logitech ZONE WIRELESS PLUS User manual

LOGITECH ZONE WIRELESS PLUS
Setup Guide
Guide d’installation

CONTENTS
English . . . . . . . . . . . . . . . . .3
Français . . . . . . . . . . . . . . . 13
Español . . . . . . . . . . . . . . . . 23
Português . . . . . . . . . . . . . . 33

KNOW YOUR PRODUCT
Microphone boom
Power/Pairing light
indicator
Active Noise
Cancellation (ANC)
Power/
Bluetooth®pairing
USB port for
charging cable
USB-C adapter
Light indicator
USB-A Unifying™
+Audio receiver
Volume up
Volume down
Mute
Multi-function
button
Teams/
Multi-function
button
Qi wireless charging area
UC version MSFT Teams version
3English

USB-A USB-C ADAPTER USB-A | USB-C
Zone
Wireless
2 sec.
WHAT’S IN THE BOX
1. Headset
2. USB-A Unifying™ + audio receiver
3. USB-C to A adapter
4. USB-A to C charging cable
5. Travel bag
6. User documentation
POWER ON/OFF
1. Press power button for 1 second.
2. Once powered on, light indicator turns white.
Ifnodevice is connected, it will ash white slowly.
PAIRING VIA BLUETOOTH®
1. Press power button for 2 seconds. Light indicator
willash white rapidly.
2. Open Bluetooth®settings on your device.
3. Select Zone Wireless Plus in discoverable devices.
4. Once successfully paired, light indicator will turn
solidwhite.
Power
4English

PAIRING HEADSET, KEYBOARD AND MICE VIA USB RECEIVER
1. Download Logitech®Unifying Software at www.logitech.com/support/unifying.
2. USB-A
Insert the Zone Wireless Plus receiver into the computer USB-A port.
USB-C
Insert the USB-A receiver into the USB-C adapter. Then insert the adapter into the computer USB-C port.
3. Zone Wireless Plus headset is already paired to the receiver it ships with. Just power on the headset.
Oncesuccessfully paired, the light indicator on the receiver will remain solid white. Light indicator on
theheadsetwill turn solid white.
4. To pair mice and keyboard,
a. Open the software and continue clicking “Next” on the bottom right corner. Ifyoualready have other
unifyingreceivers (with logo), please unplug them.
b. Locate the OFF-ON slider on your mice and keyboard. Turn each device o and back onto restart
yourdevicesand nish pairing.
- If paired, please follow the on-screen prompt and test it out to conrm successful pairing.
- If pairing failed, please retry or refer to our support page
www.logitech.com/support/zonewirelesspluspairing.
NOTE: you can pair up to 6 Logitech Unifying peripherals.
ADJUSTING HEADSET
1. Adjust headset by sliding earcups up and down
theheadband.
2. It may be easier to adjust the headset on your head.
Movethe earcups up and down the headband until
theysit comfortably on your ears.
ADJUSTING THE MICROPHONE BOOM
1. Microphone boom rotates 270 degrees. Wear it on either
left or right side. Audio channel will switchautomatically,
depending on the direction you are wearing
themicrophone.
2. Flexible microphone boom — adjust boom location
tocapture voice better.
OFF/ON
www.logitech.com/
support/unifying
Advanced Next
USB-A
USB-C
5English

HEADSET CONTROLS
TEAMS version
Usage Button Action
Call controls
Answer / End call
Multi-function
Short press
Reject call 2 second press
Resume call Short press
Transfer active call to
other device Short press
Teams activities
Check connection to
teams Short press
Quick access to Teams Short press
Respond to Teams
notications Short press
Trigger Teams voice
skills (Cortana) 2 second press
Media controls
Play / Pause Multi-function Double press
Track forward Multi-function
and “+”Short press
Track backward Multi-function
and “–”Short press
Volume
Volume up “+”Short press
Volume down “–”Short press
Headset
connection and
battery status
Check connectivity
and battery life “+”and “–”Short press
MSFT Teams version
6English

“ANC on”
“ANC o”
ACTIVE NOISE CANCELLATION (ANC)
ANC blocks out the noise around you to help you
concentrate on the task at hand.
1. Press the ANC button on the side of the earcup.
2. There will be voice notications when turning ANC on
ando. These can be turned o in the Logi Tune app.
MUTE
Mute
Move mic boom
uptomute
Voice notications
indicatewhen
themicrophone is on/
omute
“Mute on”
“Mute o”
Move mic boom
downto unmute
Note:
- Teams activities are only functional when Teams is running on an unlocked computer.
- Media control functionality depends on type of application.
- Call activities are always the rst priority. When two devices are connected, the Bluetooth®
connection will be prioritized over receiver. When two Bluetooth®devices are connected, the last
active device will override the other.
Tip: Button customizations and Music EQ controls available on Logi Tune app.
UC version
Usage Button Action
Call controls
Answer / End call
Multi-function
Short press
Reject call 2 second press
Voice assistant Multi-function 2 second press
Media controls
Play / Pause Multi-function Double press
Track forward Multi-function
and “+”Short press
Track backward Multi-function
and “–”Short press
Volume
Volume up “+”Short press
Volume down “–”Short press
Headset status Check connectivity
and battery life “+”and “–”Short press
UC version
7English

Powered on or fully charged
Battery charging
Low battery
Bluetooth®pairing mode
Bluetooth®pairing mode
whilelowbattery
No paired device
No paired device while lowbattery
HEADSET LIGHT INDICATOR
Light Status
White
Solid Powered on or fully charged
Breathing Battery charging
Fast pulsing Bluetooth®pairing mode
Slow pulsing No paired device
Red
Solid Low battery
Fast pulsing Bluetooth®pairing mode while low battery
Slow pulsing No paired device while lowbattery
8English

RECEIVER INDICATOR LIGHT
TEAMS version
Light Status
White
Fast ashing Pairing mode
Solid Paired
Repeat ashing on
and o Incoming call
Purple
Pulsing
Connecting to
Teams / Teams
notications
Flashing for 10
seconds and o
Failed connection
to Teams
Flashing 3 times
and o
Not connected to
Teams
Solid Connected to
Teams
Red Solid Mute on
Pairing mode
Paired
Failed connection
toTeams
Incoming call
Mute on
Not connected
toTeams
x3
10 sec.
Connected to Teams
UC version
Light Status
White
Fast ashing Pairing mode
Solid Paired
Repeat ashing on
and o Incoming call
Red Solid Mute on
Pairing mode
Paired
Incoming call
Mute on
Note:
Receiver light indicates headset status only.
Connecting to Teams/
Teams notications
9English

www.logitech.com/tune
LOGI TUNE APP
Install application
1. Download Logi Tune Desktop from
www.logitech.com/tune
2. Download the Logi Tune mobile app from the Apple App Store®
orGooglePlay™ stores by searching for “Logi Tune“.
Charging via Qi wireless charger
1. Fold headset with the wireless charging icon
ontheearcupto the outside.
2. Place earcup with wireless charging icon on top
ofanyQiwireless charging base.*
3. Indicator light will be a breathing, white light
whencharging.
4. Indicator light will be solid white when fully charged.
– 2hours of charging fully charges the battery.
* Qi wireless charging base is not included.
Headset indicator light
CHARGING
Headset automatically powers o when left idle.
Sleeptimer can be changed in the Logi Tune App.
Headset indicator light will turn RED when battery is low.
Charging via USB cable
1. Plug the USB-C cable end into the USB-C port onthe
bottom of the earcup.
2. Plug the USB-A end into the USB-A charging port
onyourcomputer or AC adapter.
3. Indicator light will be a breathing white light
for charging.
4. Indicator light will be solid white when fully charged.
– 2hours will fully charge the battery.
– 5 minutes will give you 1 hour of talk time.
5. Headset can be used with receiver and Bluetooth®paired
while charging.
10 English