Logitech H800 User manual

3
School of Continuing Studies
Getting started with
Logitech® Wireless Headset H800

Getting started with
Logitech® Wireless Headset H800
Logitech® Wireless Headset H800

Logitech® Wireless Headset H800
3
4
2
1
6
13
10
8
12
7
5
9
11
Features
Headset elements
1. Noise-canceling microphone 15
2. Flexible, rotating microphone boom
3. Adjustable headband 17
4. Sculpted ear pads
5. Charging port
6. Wireless connection status light
7. Battery status light
16
Headset controls
8. Volume up
9. Volume down
10. Microphone mute
11. Play/pause or Answer call/end call
14
12. Next track/Fast Forward
13. Previous track/Rewind
14. Device selection switch
Other elements
15. USB wireless Nano receiver
16. Nano receiver storage
17. USB charging cable

Getting started with
3
1

Logitech® Wireless Headset H800
*
Connecting to a USB Wireless Nano receiver (Preferred Method)
1. Power on the wireless headset
2. Slide the Device selection switch on the right ear cup to the
USB (top) position
3. Swap between speakers and headphones
a. Click the small speaker icon next to the clock on your
Windows taskbar.
2

Getting started with
b. Select the small up arrow to the right of your current audio
output device.
a. Select your output of choice from the list that appears.
Connecting to a Bluetooth®device
1. Power on the wireless headset
2. Slide the Device Selection switch on the right ear cup to the
Bluetooth (middle) position
3. Activate paring on your Bluetooth device (Refer to the
documentation that comes with your device for pairing
instructions) If your Bluetooth device requests a security
code, PIN, or pass code, enter 0000. The Bluetooth
connection is made
4. To connect additional Bluetooth devices to the wireless
headset, visit www logitech com/support,select your
product, and find the FAQ about connecting multiple
Bluetooth devices. You can pair up to seven Bluetooth
devices with the headset, including smartphones, tablets,
and MP3 players.

Logitech® Wireless Headset H800
3

Getting started with
Answering a call
To answer a call with a smartphone, press the
Play/Pause (phone icon) button on right ear cup
To end a call, press and hold for three seconds
the Play/Pause button
Nano receiver and battery information
Wireless connection status light
Solid green
Connection made; your headset is ready to use
Flashing green
Your headset and Nano receiver are not connected
No light
Your headset is powered off
Battery status
Light
Battery Level
Description
Red and beeping
<10%
<30 minutes of talk time left
Flashing amber
Headset charging
Steady amber
100%
Charging complete
Note: To charge the headset, plug the included USB charging cable into your headset and computer When the headset battery
is very low, a full charge can take up to three hours But you don’t have to stop using the headset because it charges while you
talk or listen to music

Logitech® Wireless Headset H800
Help with setup
Something not sound right? No sound at all? Microphone not working?
• Try moving the headset closer to the Nano receiver The wireless connection status light on the
headset turns solid green when the headset is in range (up to 40ft/12 m) with the Nano receiver
See the wireless performance table below for Nano receiver placement tips
• When using with the Nano receiver, the Device Selection switch on the headset should be set
to the last position
• Make sure the headset is the active input/output audio device in both your application and
operating system For more information, see Test the headset
• Adjust the volume and microphone settings to an audible level in both your application and
operating system
• Quit and restart your media application
• If you’re using a USB hub (powered or un-powered), try plugging the Nano receiver directly
into your computer
• Try using the headset with another computer
Headset not charging?
• Use the provided USB charging cable Connect the cable to the charging port on the headset,
and connect the other end of the cable to a USB port on your computer
• If you are using a USB hub, connect the charging cable directly to a USB port on your computer
• If the battery status light on the headset is not amber (solid or flashing), the headset is
not receiving power from your computer’s USB port Try another USB port on your computer,
and then turn on or wake up your computer to charge the headset
Music controls not working?
• Music controls for applications other than iTunes® and Windows Media Player® are not supported
• If you use Windows®, you can download an optional software enhancement from
www logitech com/support to improve music control
• Some functions of the headset may not be supported depending on the tablet, smartphone and/
or application

Bluetooth not connecting?
• Set the device selection switch on the headset to the Bluetooth (middle) position
• Do not use the Nano receiver for a Bluetooth connection
• Try powering off the headset, and then power it back on by sliding the Device Selection switch
to the Bluetooth position
• Re-establish pairing between the headset and your Bluetooth device Initiate pairing
for the headset by pressing and holding for five seconds the Volume + and Next track/
Fast forward buttons on the headset Next, initiate paring for your Bluetooth device
(Consult the documentation that comes with your Bluetooth device )
• Try using the headset with a different Bluetooth device
• If you have paired more than one Bluetooth device to the wireless headset and are having trouble
using any of these devices with the headset, visit www logitech com/support, select your product,
and find the FAQ about connecting multiple Bluetooth devices
Wireless performance
Not recommended
Recommended
Back of desktop tower
Front of desktop tower
Plugged into monitor or keyboard USB port
Directly plugged into the PC
USB hub (powered or non-powered)
Directly plugged into the PC
Right next to other receivers (laptop)
Away from other receivers (laptop)
Within three feet of wireless router
More than three feet away from a wireless router
Source: https://www.logitech.com/