Louvolite 1100 Series User manual

CHANNEL
CHANNEL+
UP
LCD SCREEN
STOP
DOWN
CHANNEL
CHANNEL+
UP
LCD SCREEN
STOP
DOWN
Lithium Rechargeable Battery Remote
Instructions - 1100 Series
LCD Screen IllustrationSingle Group Transmitter
(14 channels) (3 x 14 channels)
Multi-Group Transmitter
R1722 - 14/42 Channel Remote Control
Single Group / Multi-Group
Channel No.
Group No.
For Single Group Setting
Step 1. Press and hold
both up & down buttons
for 3 seconds until
00 Channel displays.
Release the
buttons and the 00 will
start to ash.
Step 3. Press and hold
Channel + and Channel - at
the same time for 3 seconds
to conrm selection, No 01
will appear.
Step 2. Press the up or down
button to select the required
number of channels
(between 1 - 14).
To select Number of Channels (if less than 14)
Remote is for use for
up to 42 blinds.
02
02 02
LIMIT
CONFIRM
Switching between Single Group & Multi-Group
Channel No.
Group No.
Press and hold UP & DOWN
button then press and hold
LIMIT for 5 seconds. Group
number will display for
Multi-Group.
02
02
LIMIT
02
00 01 14 01
®

Multi-Group Setting
4. Press Channel + to
enter second group num-
ber of channels.
6. If you only need 2 groups
press and hold Channel +
and Channel - at the same
time for 3 seconds to conrm
selection. To set 3 groups
repeat steps 4 & 5 and then
press and hold Channel +
and Channel - at the same
time for 3 seconds to conrm
selection.
5. Press the UP or DOWN button
to select the required number of
channels (between 1-14)
Two-Group Setting
Repeat steps 1 & 2 for Group 1 Channel Selection. Skip step 3.
00 01 14 01