Lowrance ELITE Ti2 User manual

| 1
ELITE Ti2| Quick Guide - EN
ELITE Ti2
Quick Guide
Keys
A
B
C
D
APages • Press to activate the home page
BZoom in/
out
• Press to zoom the image
• Simultaneous press both keys to save a Man
Overboard (MOB) waypoint at the current
vessel position
CWaypoint
• Press to open the new waypoint dialog
• Press twice to save a waypoint
• Press and hold to access the find dialog
DPower
• Press to turn the unit ON
• Press and hold to turn the unit OFF
• When ON press once to display the system
controls dialog
-repeat short presses to cycle the
backlight brightness
Card reader
• To insert, carefully slide the card into the slot until it clicks into place
• To remove, carefully push in the card until it clicks out of place
System controls dialog
Used for quick access to system settings.
To activate:
• press the power key
¼Note: The content of the system controls dialog depends on connected equipment
and active panel.
EN
01-EN-988-12222-001

2|
ELITE Ti2| Quick Guide - EN
Home page
Activate the home page by pressing the pages key.
ABCD
E
A. Settings button
B. Application buttons
C. Close button
D. Favorites
E. Toolbar buttons
Application pages
To activate an application page:
• tap the application button (full page panel)
• tap a favorites button
• press and hold an application button to select a predefined quick split page
C
AB
A. Control bar
B. Application panel
C. Menu
Favorite pages
Add a favorite page
01-EN-988-12222-001

| 3
ELITE Ti2| Quick Guide - EN
Edit a favorite page
Edit favorite page
Delete favorite page
Menus
The panel menu
To hide the panel menu:
• swipe the menu to the right
To restore the panel menu:
• press the menu button
Settings menu
To activate the settings dialog:
• select the settings button in the
system controls dialog
• select the settings button on the
home page
Chart
A
To navigate the chart panel:
• zoom the chart by using the zoom
buttons (A), or by using the + or -
buttons on the keypad
• move the view in any direction by
panning the chart
• display information about a chart item
by tapping the item
01-EN-988-12222-001

4|
ELITE Ti2| Quick Guide - EN
Waypoints
To create a new waypoint:
• select the new waypoint option in the menu
¼Note: With cursor inactive, the waypoint will be placed at vessel’s position. With cursor
active, the waypoint will be placed at selected cursor position.
Sonar
A
To navigate the sonar image:
• zoom the image by tapping the zoom
buttons (A), or by using the + or -
buttons on the keypad
• view sonar history by paning the image
• adjust sensitivity and colorline from the
panel menu
• toggle available sonar frequencies from
the menu
Setting up the image
Use the sonar menu options to set up the image.
• The range settings determines which water depth that is visible on the
screen
• The unit supports several transducer frequencies. Available options
depend on type of transducers connected to the system
• Increasing sensitivity shows more detail on the screen. Decreasing
sensitivity displays less. Auto sensitivity automatically adjusts the sonar
return to the optimal levels
• Colorline adjust the colors of the display to help differentiate softer
targets from harder ones
¼Note: When the cursor is active, some options on the sonar menu are replaced with
cursor mode features. Select clear cursor to return to the normal sonar menu.
01-EN-988-12222-001

| 5
ELITE Ti2| Quick Guide - EN
Fishing mode
Used to select predefined sonar settings designed for specific fishing conditions.
¼Note: Use shallow water fishing mode when fishing in less than 18 meter (60 feet) of
water.
SideScan and DownScan
SideScan DownScan
• Zoom the image by using the zoom keys
Fish reveal
Select FishReveal to display fish arches in the DownScan image.
Product manuals
For more product documentation, technical specifications and declarations, refer to the
product website on: www.lowrance.com
01-EN-988-12222-001