Lutron Electronics Maestro Wireless Pico Series User manual

Innovative wireless controls that provide flexibility,
convenience, and easy installation and set up.
PicoTM wireless
control
Maestro Wireless®|residential & commercial light control
www.lutron.com/maestrowireless
Lutron Electronics Co., Inc.
7200 Suter Road
Coopersburg, PA 18036-1299
Technical Support Center 1.800.523.9466
Customer Service 1.888.LUTRON1
© 06/2009 Lutron Electronics Co., Inc. IP/N 367-1629 REV A
Pico wireless control with
wall mount and Claro®wallplate
Pico wireless control
with car visor clip
Pico wireless control
with optional table stand
NEW

What is Maestro Wireless?
Maestro Wireless is a light control system that’s ideal
for creating custom solutions for residential and
commercial spaces.
What’s new?
The Maestro Wireless family of lighting controls has
expanded to include sensors and lamp dimmers,
as well as table stands and wall mounts.
In addition, Maestro Wireless now incorporates
Lutron’s reliable Clear ConnectTM RF Technology for
wireless connectivity to sensors,wall dimmers,
handheld dimmers, and switches.
What are the benefits?
•Contractors can pull less wire by mounting a PicoTM
wireless control instead of creating a new 3-way
control, as well as installing a Radio Powr SavrTM
wireless sensor.
•Set up is easy –
– Less wires coupled with easy set up means less
time spent on a job—while homeowners get more
for their money.
– Any contractor—from apprentice to senior
electrician—can build custom solutions with the
Maestro Wireless family, giving him more choices to
offer to clients.
Maestro Wireless®
Maestro Wireless uses Lutron’s reliable Clear ConnectTM RF Technology which
allows PicoTM wireless controls and Radio Powr SavrTM occupancy/vacancy sensors to
communicate with dimmers, switches, and lamp dimmers, allowing for easy retrofit.
dimmer
•single pole/multi-location
•halogen/incandescent,
and MLV models
•specification and
residential models
switch
•single pole/multi-location
•controls most load types
for lights and fans
•specification and
residential models
•non-nuetral
version available
lamp dimmer
•controls incandescent
table or floor lamps
Radio Powr Savr
wireless occupancy
and vacancy sensor
•adjustable sensitivity
•adjustable setting for
“lights on” level
•adjustable delayed time
before lights turn off
•exclusive XCTTM
Technology detects
fine motion
Pico wireless control
•communicates
wirelessly with up to
10 Maestro Wireless
dimmers, lamp
dimmers, and switches
•includes wall mount
and car visor clip
wall mount
•included
•wallplate sold
separately
table stand
•sold separately
car visor clip
•included
•works up to
100 feet away
residential space
commercial space

Residential opportunities
A contractor on the job with Maestro Wireless:
8:03 am arrived at the Jone’s residence, turned off the power to the switch,
and assessed the current wiring
8:13 am began installing the Maestro Wireless dimmer in place of existing switch
8:29 am mounted PicoTM wireless control and wallplate for 3-way control without
pulling wire or adding a wallbox
8:35 am set-up dimmer to communicate to mounted Pico wireless control
8:37 am got in truck to head to next residence to install another Maestro Wireless solution
Contractors will like Maestro Wireless because of its easy installation and setup. They’ll be able to give their
customers more value with less time, less wires, and less worries. Homeowners will appreciate the added
functionality and convenience, as well as the energy-savings that comes with dimmers and occupancy sensors.
Simple setup for the Pico wireless control means contractors can easily and confidently make Maestro Wireless
their new solution to installing a 3-way dimmer – and they’ll be able to give their customers added value – without
spending a lot of time on the job.
8:03 8:37
Homeowners can bring energy savings – and a little bit of movie magic – to their family room with Maestro Wireless.
With a Pico wireless control, lights can easily be adjusted at the touch of a button. A favorite light level can even be
saved so the one used most can be returned to again and again. Setup is simple, taking less than a minute.
Homeowners can save energy and set the mood in the master suite with the help of Maestro Wireless.
A wireless occupancy sensor ensures bathroom and closet lights are never left on, while a Pico wireless
control at the bedside can set the perfect light level.
Master suite
bedroom
ceiling
light
bedside
lamps
fluorescent
bathroom
light
turns on/off
bathroom
light
control
lights from
bedside
Family room
overhead
lights
floor
lamp
tabletop
control
Maestro Wireless can put the minds of homeowners at ease. With a PicoTM wireless control kept in the car they
can turn lights on to welcome them home. Access to these lights is even easier when a Pico wireless control is
mounted where there was never a switch before.
Welcome home
outside
lights
control
lights
from car
entry
lights
new point
of control
Additional applications
Look for additional residential opportunities in these areas with Radio Powr Savr wireless occupancy and
vacancy sensor: kids’ rooms, pantries, closets, and basements.
Before After

Commercial opportunities
Wireless installation estimate
Company Smith Electrical Contracting
Installer John Miller, Apprentice
Job Install wireless occupancy sensor
in office space
Materials
(1) Lutron Maestro Wireless®occupancy sensor
(1) Lutron Maestro Wireless switch
Labor
30 minutes
•replace existing switch with Maestro
Wireless dimmer or switch
•mount Radio Powr SavrTM occupancy
sensor to ceiling
Traditional installation estimate
Company ABC Electrical Contracting
Installer Bob Jones, Sr. Electrician
Job Install wired occupancy sensor
in office space
Materials
(1) wired occupancy sensor
(1) power pack
(1) J-box
50 ft low voltage wire
Labor
½ day
•pull wire
•mount J-box
•install sensor
When it comes to commercial renovation and new construction, contractors will enjoy the benefit of easy
installation and setup as well as Lutron’s unsurpassed quality and reliability.
See the savings with Maestro Wireless
Making dollars and sense – In less than an hour a contractor can install a dimmer and occupancy sensor,
complete the setup, and give his customer the added flexibility of having a PicoTM wireless control to adjust lights
easily for meetings and presentations. With less wiring and less setup time, Maestro Wireless helps you bring
more value to your contractors.
Conference room lights can be left on even when the room is unoccupied. Pairing a Maestro Wireless dimmer or
switch with a wireless occupancy sensor ensures lights are off when they aren’t in use. A Pico wireless control
adds flexibility to meetings, so lights can be adjusted for a presentation without interruption.
Conference room
halogen
down
lights
turns on/
off lights
fluorescent
lights
Additional applications
Look for additional commercial opportunities in these areas with Radio Powr Savr wireless occupancy/
vacancy sensor: corridors, storage areas, schools, and hospitality “back of house” areas.
Contractors can help their customers create the ultimate guest experience with convenient wireless controls.
Pico wireless controls enhance comfort and flexibility while a wireless occupancy sensor in the bathroom
helps save energy by making sure lights are turned off when the bathroom isn’t in use.
Hotel room
entryway
control
table
lamps
fluorescent
bathroom
light
turns on/off
bathroom
light
control
lights from
bedside
Restrooms are an area where lights are often left on indefinitely. A wireless occupancy sensor is an ideal solution
that requires no wiring and is easy to setup. Simply install a Maestro Wireless dimmer or switch and mount the
occupancy sensor to the ceiling – now lights will turn off when the room is unoccupied, saving energy.
Restroom
overhead
lights
turns on/
off lights
control
lights from
table

gloss finish
satin finish
metal finish
white
hot
stainless steel
(wallplates only)
ivory
merlot
almond
plum
light almond
turquoise
gray
sea glass
brown
taupe
black
eggshell
mocha stone goldstone desert stone stone limestone
snowbiscuit palladium midnight sienna terracotta greenbriar
bluestone
* Due to variations in the printing process, color swatches printed may not be exact.
When matching colors, please request a color sample from Lutron customer service at 1.888.LUTRON1.
Colors and finishesModel numbers
Dimmers and switches
Model number Control Type Maximum Capacity
MRF2-600M- single-pole/multi-location dimmer 120 V, 600 W incandescent/halogen
MRF2-6MLV- single-pole/multi-location dimmer 120 V, 600 W incandescent/
halogen, magnetic low voltage
MRF2-10D-120- single-pole/multi-location
spec grade dimmer
120 V, 1000 W incandescent/
halogen, magnetic low voltage
MRF2-6ND-120- single-pole/multi-location
spec grade neutral wire dimmer
120 V, 600 W incandescent/
halogen, magnetic low voltage
MA-R- multi-location
companion dimmer
120 V, provides multi-location dimming
for up to 9 additional locations
MRF2-6ANS- single-pole/multi-location switch
120 V, 6 A light or 3 A fan, incandescent,
halogen, MLV, ELV, non-dim fluorescent ballasts,
and general purpose fans
MRF2-8S-DV- single-pole/multi-location
spec grade non-neutral switch
120V/277V, 8 A light, incandescent, halogen, MLV, ELV,
non-dim fluorescent ballasts,
does not require a neutral wire connection
MRF2-8ANS-120- single-pole/multi-location
spec grade switch
120 V, 8 A light or 5.8 A fan, incandescent,
halogen, MLV, ELV, non-dim fluorescent ballasts,
and general purpose fans
MA-AS- multi-location
companion switch
120 V, provides multi-location switching
for up to 9 additional locations
MRF2-6ANS-277- single-pole/multi-location
spec grade switch
277 V, 6 A light, MLV, ELV,
non-dim fluorescent ballasts
MA-AS-277- multi-location
companion switch
277 V, provides multi-location switching
for up to 9 additional locations
MRF2-3LD- plug-in lamp dimmer 300 W, inc./halogen for table or floor lamps
PicoTM wireless control & accessories
MRF2-3BRL-L- Pico wireless control – communicates wirelessly with up to 10 Maestro Wireless dimmers,
lamp dimmers, and switches
L-PED1- table stand for Pico wireless control
CW-_- Claro®wallplate in 1-4 openings
Radio Powr SavrTM wireless occupancy and vacancy sensor
LRF2-OCRB-P-WH occupancy and vacancy sensor – auto-on/auto-off or manual on/auto-off
LRF2-VCRB-P-WH vacancy sensor – manual on/auto-off only (complies with CA Title 24 requirements)
Products available in the following colors:
sensors – white (WH) only
lamp dimmers & table stands (for Pico wireless control) – white (WH), black (BL)
Pico wireless controls:
gloss finish – white and gray (WG), white (WH), ivory (IV), almond (AL),
light almond (LA), gray (GR), brown (BR), black (BL)
dimmers, switches and Claro wallplates:
gloss finish – white (WH), ivory (IV), almond (AL), light almond (LA), gray (GR), brown (BR), black (BL)
satin finish – hot (HT), merlot (MR), plum (PL), turquoise (TQ), sea glass (SG), taupe (TP), eggshell (ES), biscuit (BI),
snow (SW), palladium (PD), midnight (MN), sienna (SI), terracotta (TC), greenbriar (GB), bluestone (BG),
mocha stone (MS), goldstone (GS), desert stone (DS), stone (ST), limestone (LS)

Easy to set up
Maestro Wireless products can be set up quickly and easily.
Step 1
Press and hold the dimmer or switch
tap button for approximately six seconds.
Once the LED(s) starts to blink slowly,
release the tap button.
Repeat steps 1 and 2 to set up multiple Pico wireless controls or sensors to a single dimmer.
Repeat steps 1 and 2 to set up a single Pico wireless control or sensor to multiple dimmers.
The PicoTM wireless control and Maestro Wireless dimmer are easy for any
homeowner to use.
turn dimmer(s) on to
100% brightness
raise lights
lower lights
turn dimmer(s) on to
your favorite light level
turn dimmer(s) off
LEDs indicate light level and glow softly so
you can find the dimmer in the dark
rocker adjusts light level to suit any activity
tap once to turn lights on to favorite level,
tap twice for full on, press and hold for
delayed fade-to-off
Easy to use
Step 2
Press and hold the “off” button on the PicoTM wireless control or
sensor for approximately six seconds. When the dimmer or switch
learns the Pico wireless control or sensor, its LED and load will
flash three times and the device will exit setup mode.