Luverne 571134 User manual

INSTALLATION INSTRUCTIONS AND PARTS LIST
FOR MOUNTING 571134 MEGA STEP/OMEGA STEP BRACKETS ON:
2011 DODGE DURANGO/2011 JEEP GRAND CHEROKEE
PLEASE READ INSTRUCTIONS COMPLETELY BEFORE INSTALLING
1. LOCATE AND REMOVE THE SECOND, FOURTH, AND SIXTH OBROUND BODY PLUGS FROM
UNDER AND BEHIND THE PLASTIC GROUND EFFECTS. FIG.1
2. INSTALL THE T-BOLT (ITEM #3) UP INTO OBROUND HOLE AS SHOWN IN FIG.2
3. PLACE THE BRACKET (ITEM #2) UP AND OVER T-BOLT THREADS AND PLACE THE NUT (ITEM
#7) ON FINGER TIGHT. THEN PUT (2) CARRIAGE BOLTS (ITEM #5) IN THE OBROUND HOLES IN
THE BRACKET AND PINCH WELD AREA AND THEN NUT (ITEM #6). TIGHTEN ALL FASTENERS.
4. REPEAT STEPS 2 & 3 FOR EACH BRACKET ON BOTH DRIVER AND PASSENGER SIDE.
5. ATTACH THE STEPS (ITEMS #1) TO THE MOUNTING BRACKETS.
5.1 INSERT [3] 5/16” SQUARE HEAD SCREWS (ITEM #8) ON THE UNDERSIDE OF EACH STEP
IN THE CENTER SLOT OF THE MEGA BOARDS. THE BOARD WILL ALREADY HAVE (5)
5/16” SQUARE HEAD SCREWS IN THE INSIDE SLOT, AND (2) OF THEM YOU WILL NOT
USE. SLIDE THEM TO THE END OF BOARD AND PLACE A NUT (ITEM #4) ON THEM.
(NOTE: O-MEGA STEP WILL NEED THREE SQUARE HEAD SCREWS IN BOTH CENTER
SLOT AND INSIDE SLOT. REMOVE ONE END CAP TO INSERT SCREWS).
.
5.2 LOCATE THE STEP IN AND OUT AS DESIRED AND INSTALL THE 5/16” SERRATED
FLANGE NUTS (ITEM #4) ON THE SQUARE HEAD SCREWS.
TIGHTEN ALL THE NUTS.
SERVICE PARTS LIST
ITEM PART NO. QTY DESCRIPTION
1 575072 2 MEGA STEP BOARDS .72” (JEEP GRAND CHEROKEE)
1 585072 2 OMEGA STEP BOARDS. 72” (JEEP GRAND CHEROKEE)
1 575078 2 MEGA STEP BOARDS 78”- (DURANGO)
1 585078 2 O-MEGA STEP BOARDS 78” SATIN - (DURANGO)
1 586078 2 O-MEGA STEP BOARDS 78” BLACK - (DURANGO)
2 551932 6 BRACKET-MTG, MEGA STEP, 571134
3 551935 6 T-BOLT WELDMENT, ZP
4 102680 16 NUT-SERR FLG, 5/16-18, SST
5 104260 12 BLT-CRG, #10-24 X .75, SST
6 104261 12 NUT-SERR FLG, #10-24, SST
7 103737 6 NUT-SERR FLG, 7/16-14, ZP
8 106880 6 SCR-SQ HD, 5/16-18 X 1.00, MAGNIGRD
551929 SHEET 1 OF 2 10MAY11