Madison Park Arianna Swoop Wing Chair User manual

R
FRONT LEGS 2
1
Pre-assembly:
Take out all parts and hardware from box.
Do not discard any content until assembly is complete to avoid accidentally discarding small parts or hardware.
Important safety instructions:
Please read carefully all instructions before assembly.
For your safety and ease, assembly by two or more adults is recommended.
Keep instructions for future use.
BACK LEGS 2
H1
H2
H3
H4 Alen Wrench
Bolts 5/16"x 51mm
1
Lock Washers 5/16"
Flat Washers 5/16"
DISCLAIMER:
WHEN PROPERLY ASSEMBLED, THIS ITEM IS SAFE FOR INTENDED USE. SELLER IS NOT LIABLE FOR ANY DAMAGES
RESULTING FROM ITEM BEING IMPROPERLY ASSEMBLED AFTER PURCHASE.
Assembly Procedures:
8
8
8
CHAIR
Legs and Hardware
Package
Step 1:
ASSEMBLY INSTRUCTIONS
Description: Arianna Swoop Wing Chair
Parts List
Item Description QTY
P1
P2
P3
Hardware List
Item Description QTY
Page 1 of 2
Assemble the chair on a flat and soft surface either on a carpet or cloth to prevent the finish from scratching.
To locate the hardware, please turn the chair upside down, you will find the components beneath the fabric cover that is
secured by a Velcro strap underneath the seat cushion. Lift the strap upwards, legs and hardware box could be located
beneath the fabric cover.

ADDITIONAL NOTE ABOUT SAFETY: BOLTS MAY LOOSEN DURING NORMAL EVERYDAY USE. THEY SHOULD BE
PERIODICALLY INSPECTED AND RE-TIGHTENED TO PREVENT DAMAGE OR INJURY. ALWAYS CHECK TO ENSURE THAT ALL
HARDWARE IS KEPT TIGHTENED.
Step 2: Attach the Legs (P2), (P3) to the Chair (P1) as shown below.
(H1)x8
(H2)x8
(H3)x8
(H4)x1
Bolts 5/16"x 51mm
Lock Washers 5/16"
Flat Washers 5/16"
Alen Wrench
Step 3: Turn the chair over and place it upright on a level surface.
Assembly is complete.
Thank you for your purchase
Page 2 of 2