Madison Park Martin Surfboard Tufted Ottoman User manual

R
legs 6
1
Pre-assembly:
Take out all parts and hardware from box.
Do not discard any content until assembly is complete to avoid accidentally discarding small parts or hardware.
Important safety instructions:
Please read carefully all instructions before assembly.
For your safety and ease, assembly by two or more adults is recommended.
Keep instructions for future use.
Assembly Procedures:
DISCLAIMER:
WHEN PROPERLY ASSEMBLED, THIS ITEM IS SAFE FOR INTENDED USE. SELLER IS NOT LIABLE FOR
ANY DAMAGES RESULTING FROM ITEM BEING IMPROPERLY ASSEMBLED AFTER PURCHASE.
Plastic washer 6
Bench
Page 1 of 2
Step 1: Assemble the Bench on a flat, soft surface such as carpet or cloth to prevent scratching the finish. Take
out the Leg and hardware package box.
Item
Parts List
QTY
Description
P3
P2
P1
ASSEMBLY INSTRUCTIONS
Description: Martin Surfboard Tufted Ottoman
Legs and Hardware
Package

ADDITIONAL NOTE ABOUT SAFETY: BOLTS MAY LOOSEN DURING NORMAL EVERYDAY USE. THEY SHOULD BE
PERIODICALLY INSPECTED AND RE-TIGHTENED TO PREVENT DAMAGE OR INJURY. ALWAYS CHECK TO ENSURE THAT ALL
HARDWARE IS KEPT TIGHTENED.
Page 2 of 2
Step 3: Turn the bench over and place it upright on a level surface. Assembly is complete.
Step 2: Attach the legs (P2) into the holes on the bottom of bench top (P1) through plastic washer (P3).
Thank you for your purchase