Magellan MG-6060 Operating instructions

All-In-One Wireless Security System V1.0
Model # MG-6060
Programming Guide

Magellan 3
Table of Contents
Things You Should Know ..................................... 4
About This Programming Guide........................................... 4
Conventions......................................................................... 4
Installer Code (Default: 0000 / 000000)............................... 4
Maintenance Code (Default: 1111 / 111111)....................... 5
Master Code (Default: 1234 / 123456)................................. 5
Decimal and Hexadecimal Values ....................................... 6
Entering Programming Mode ............................... 7
Single Digit Data Entry Method............................................ 7
Feature Select Programming Method .................................. 7
Zone Programming................................................ 8
Wireless Transmitter Programming..................... 9
System Timers ..................................................... 10
Programmable Outputs (PGMs) ......................... 11
System Options ................................................... 12
Communicator Settings ...................................... 19
Report Codes ....................................................... 21
Remote Control Button Programming ............... 24
System Settings ................................................... 26
Installer Quick Keys............................................. 26
Appendix 1: PGM Event Table ............................ 27
Appendix 2: Connection Diagrams..................... 33
Power Connections........................................................... 33
Telephone Line Connections ............................................ 35
PGM Connections............................................................. 37
Hardwire Zone Connections.............................................. 38
X10 Transmitter Connections............................................ 39
Connecting Magellan to WinLoad ..................................... 40
Connecting to a UIP-256................................................... 41
Connecting a Paradox Memory Key (PMC-3)................... 42
Connecting the Radio Antenna ......................................... 43
Mounting Magellan on the Wall......................................... 44
Tabletop Mounting ............................................................ 45
Appendix 3: Ademco Contact ID
Report Code List .................................................. 46

4Programming Guide
Things You Should Know
About This Programming Guide
This programming guide should be used in conjunction with the Magellan Reference & Installation Manual which can be downloaded from our Web
site at www.paradox.ca. Use this guide to record the settings programmed for this console.
Conventions
Installer Code (Default: 0000 / 000000)
The Installer code is used to enter programming mode (see Entering Programming Mode on page 7), which allows you to program all the features,
options and commands of the Magellan console except user codes. The Installer code can be 4 or 6 digits in length (see section [090] option [1] on
page 12) where each digit can be any value from 0 to 9. See section [181] on page 26 to change the default code.
This symbol designates a warning or important information.
This symbol designates a suggestion or reminder.
This symbol designates a reference to another section, manual or guide.
This symbol designates a feature that can also be programmed in the Installer menu which can be accessed by pressing [menu] and then
entering your [INSTALLER CODE]. The icon will then be followed by the path or buttons that have to be pressed in order to access the feature
once in the Installer menu. For example:
= Once in the Installer menu, press the [4] key and then press the [6] key to access the desired feature.
Refer to the Installer Menu Overview on the back cover for more information on accessing and using the Installer menu.
J[4] J[6]

Magellan 5
Maintenance Code (Default: 1111 / 111111)
The Maintenance code is similar to the Installer code. It can be used to enter programming mode (see Entering Programming Mode on page 7),
which allows you to program all the features, options and commands except for the Magellan console’s communication settings (sections [100] to
[154]) as well as any user codes. The Maintenance code can be 4 or 6 digits in length (see section [090] option [1] on page 12) where each digit can
be any value from 0 to 9. See section [182] on page 26 to change the default code.
Master Code (Default: 1234 / 123456)
With the System Master code a user can use any arming method and can program user codes. The System Master code can be 4 or 6 digits in
length (see section [090] option [1] on page 12), where each digit can be any digit from 0 to 9. The System Master code cannot be changed by the
installer or maintenance code, but it can be reset to default. See section [200] on page 26 to reset to default.

6Programming Guide
Decimal and Hexadecimal Values
Figure 1: Decimal and Hexadecimal Values
Decimal and Hexadecimal Values:
Keys [0] to [9] = 0 to 9
Hexadecimal only
values:
[1] = A
[2] = B
[3] = C
[4] = D
[5] = E
[6] = F

Magellan 7
Entering Programming Mode
Use the built-in keypad to access Magellan’s installer programming mode. To access programming mode:
1. Press and hold the [0] key.
2. Enter your [INSTALLER CODE]or [MAINTENANCE CODE].
3. Enter the 3-digit [SECTION]you wish to program.
4. Enter the required [DATA].
5. Press the [*] key to clear data or to go back one step. Press the [#] key to save changes.
There are two methods that can be used to enter data when in programming mode; Single Digit Data Entry and Feature Select Programming methods.
Single Digit Data Entry Method
After entering programming mode, some sections will require that you enter decimal values from 000 to 255. Other sections will require that you
enter hexadecimal values from 0 to F. The required data will be clearly indicated in this manual. When entering the final digit in a section, Magellan
will automatically save and advance to the next section. Refer to Figure 1 on page 6 to see the keys and their equivalent decimal and/or hexadecimal
value.
Feature Select Programming Method
After entering certain sections, eight options will be displayed where each option from [1] to [8] represents a specific feature. Press the key
corresponding to the desired option and the option number will appear in the LCD screen. This means the option is ON. Press the key again to
remove the digit from the LCD screen (a *appears), thereby, turning OFF the option. Press the [*] key to set all eight options to OFF. When the
options are set, press the [#] key to save and advance to the next section.

8Programming Guide
Zone Programming
Section Description Zone Definition Zone Options Section Description Zone Definition Zone Options
[001] Zone 1:____________ ____/____/____ 1 2 3 4 5 6 7 8 [009] Zone 9:____________ ____/____/____ 1 2 3 4 5 6 7 8
[002] Zone 2:____________ ____/____/____ 1 2 3 4 5 6 7 8 [010] Zone 10:___________ ____/____/____ 1 2 3 4 5 6 7 8
[003] Zone 3:____________ ____/____/____ 1 2 3 4 5 6 7 8 [011] Zone 11___________ ____/____/____ 1 2 3 4 5 6 7 8
[004] Zone 4:____________ ____/____/____ 1 2 3 4 5 6 7 8 [012] Zone 12:___________ ____/____/____ 1 2 3 4 5 6 7 8
[005] Zone 5:____________ ____/____/____ 1 2 3 4 5 6 7 8 [013] Zone 13:___________ ____/____/____ 1 2 3 4 5 6 7 8
[006] Zone 6:____________ ____/____/____ 1 2 3 4 5 6 7 8 [014] Zone 14:___________ ____/____/____ 1 2 3 4 5 6 7 8
[007] Zone 7:____________ ____/____/____ 1 2 3 4 5 6 7 8 [015] Zone 15:___________ ____/____/____ 1 2 3 4 5 6 7 8
[008] Zone 8:____________ ____/____/____ 1 2 3 4 5 6 7 8 [016] Zone 16:___________ ____/____/____ 1 2 3 4 5 6 7 8
Zone Definitions ( )
000 = Zone Disabled (default)
001 = Entry Delay 1
002 = Entry Delay 2
003 = Follow Zone
004 = Follow / Stay Zone
005 = Instant Zone
006 = Instant / Stay Zone
007 = Instant Fire Zone
008 = Delayed Fire Zone
009 = 24Hr. Burglary Zone
010 = 24Hr. Hold-up Zone
011 = 24Hr. Buzzer Zone
012 = 24Hr. Gas Zone
013 = 24Hr. Heat Zone
014 = 24Hr. Water Zone
015 = 24Hr. Freeze Zone
J[4] J[6] Zone Options
[1] = Auto-zone Shutdown (default)
[2] = Bypassable Zone (default)
[3] = Future Use
[6] = Intellizone
[7] = Delay alarm transmission
[8] = Force Zone (default)
[4] [5] Zone Alarm Type
OFF OFF Audible alarm (default)
OFF ON Pulsed alarm
ON OFF Silent alarm
ON ON Report only

Magellan 9
Wireless Transmitter Programming
In the section corresponding to the desired zone, assign the transmitter’s serial number. In sections [058] and [059], assign the 6-digit serial number of the
MG-DCT1 that you are using as wireless doorbells. You can also use these sections to view the assigned transmitter’s signal strength.
Section Serial Number Section Serial Number
[021] Zone 1: ____/____/____/____/____/____ [041] View signal strength of remote control 1
[022] Zone 2: ____/____/____/____/____/____ [042] View signal strength of remote control 2
[023] Zone 3: ____/____/____/____/____/____ [043] View signal strength of remote control 3
[024] Zone 4: ____/____/____/____/____/____ [044] View signal strength of remote control 4
[025] Zone 5: ____/____/____/____/____/____ [045] View signal strength of remote control 5 Adding a Remote Control:
()
Remote controls can only be
added through the Installer
menu (see Conventions on
page 4). To do so:
1. Press the [MENU]key and
then press the [4] key
2. Enter the [INSTALLER CODE]
3. Press the [2] key
4. Follow the instructions that
appear
[026] Zone 6: ____/____/____/____/____/____ [046] View signal strength of remote control 6
[027] Zone 7: ____/____/____/____/____/____ [047] View signal strength of remote control 7
[028] Zone 8: ____/____/____/____/____/____ [048] View signal strength of remote control 8
[029] Zone 9: ____/____/____/____/____/____ [049] View signal strength of remote control 9
[030] Zone 10: ____/____/____/____/____/____ [050] View signal strength of remote control 10
[031] Zone 11: ____/____/____/____/____/____ [051] View signal strength of remote control 11
[032] Zone 12: ____/____/____/____/____/____ [052] View signal strength of remote control 12
[033] Zone 13: ____/____/____/____/____/____ [053] View signal strength of remote control 13
[034] Zone 14: ____/____/____/____/____/____ [054] View signal strength of remote control 14
[035] Zone 15: ____/____/____/____/____/____ [055] View signal strength of remote control 15
[036] Zone 16: ____/____/____/____/____/____ [056] View signal strength of remote control 16
[037]
to
[040]
Future use [057] Future use
[058] Wireless Doorbell 1: ____/____/____/____/____/____
[059] Wireless Doorbell 2: ____/____/____/____/____/____
J[4] J[2]

10 Programming Guide
System Timers
Section Data (value from 000 to 255) Description Defaults
[060] ____/____/____ seconds Entry delay 1 ( )045 secs.
[061] ____/____/____ seconds Entry delay 2 ( )045 secs.
[062] ____/____/____ seconds Exit delay ( )060 secs.
[063] ____/____/____ minutes Bell cut-off time ( )004 mins.
[064] ____/____/____ x 15 minutes No movement time Disabled
[065] ____/____/____ seconds (minimum 10 seconds) Intellizone delay 045 secs.
[066] ____/____/____ seconds Recent closing delay Disabled
[067] ____/____/____ times Auto-zone shutdown 005 times
[068] ____/____/____ seconds PGM1 timer 005 secs.
[069] ____/____/____ seconds PGM2 timer 005 secs.
[070] ____/____/____ minutes Power failure report delay 015 mins.
[071] ____/____/____ days Auto-test report Disabled
[072] ____/____/____ rings Number of rings 008 rings
[073] ____/____/____ seconds TLM fail timer 032 secs.
[074] ____/____/____ seconds Answering machine override delay 030 secs.
[075] ____/____/____ seconds Delay alarm transmission Disabled
[076] ____/____/____ seconds (maximum 130 seconds) Delay between dialing attempts 020 secs.
[077] ____/____/____ seconds Pager/voice delay 005 secs.
[078] ____/____/____ seconds Remote panic disarm lock delay 020 secs.
[079] ____/____/____ repetitions Voice reporting message repetitions 003 reps.
J[4] J[4]
J[4] J[4]
J[4] J[4]
J[4] J[4]

Magellan 11
*000 = No tone; 001 = Beeping; 002 = Countdown; 003 = “Hold the Line”; 004 = Bach Symphony #40; 005 = “Mission Impossible”; 006 = “What is Love”;
007 = Radio tuner
Programmable Outputs (PGMs)
Refer to Appendix 1: PGM Event Table on page 27 for the PGM events that can be used to program Magellan’s PGM outputs.
[080] ____/____/____ days Closing delinquency delay Disabled
[081] ____/____/____ (000 to 007*)Entry delay audio selection () 003
[082] ____/____/____ (000 to 007*)Exit delay audio selection () 002
[083] Future use Future use Future use
[084] ____/____:____/____ Hours Auto-test report time Disabled
[085] ____/____:____/____ Hours Auto-arm time () Disabled
Section Description Event Group # Sub-group #
[086] PGM1 Activation Event
(Default: Event group #07; Sub-group #99; Remote control option “B” - PGM activation by any user; see page 24)
(____/____) (____/____)
[087] PGM1 Deactivation Event
(Default: No event programmed)
(____/____) (____/____)
[088] PGM2 Activation Event
(Default: Event group #08; Sub-group #99; Remote control option “C” - PGM activation by any user; see page 24)
(____/____) (____/____)
[089] PGM2 Deactivation Event
(Default: No event programmed)
(____/____) (____/____)
Section Data (value from 000 to 255) Description Defaults
J[4] J[4]
J[4] J[4]
J[8] J[3]

12 Programming Guide
System Options
[090] General Options Bold = Default setting
Option OFF ON
[1] Access code length 6 digits 4 digits
[2] Audible trouble warning (except AC power failures) Disabled Enabled
[3] Lock master code Disabled Enabled
[4] Use user code 16 as duress code Disabled Enabled
[5] Console tamper supervision Disabled Enabled
[6] Need code to bypass zones Disabled Enabled
[7] PGM1 normal state N.O. N.C.
[8] PGM2 normal state N.O. N.C.
[091] General Options Bold = Default setting
Option OFF ON
[1] Panic 1 (Emergency) Disabled Enabled
[2] Panic 2 (Auxiliary) Disabled Enabled
[3] Panic 3 (Fire) Disabled Enabled
[4] Panic 1: Silent or audible alarm Silent Audible
[5] Panic 2: Silent or audible alarm Silent Audible
[6] Panic 3: Silent or audible alarm Silent Audible
[7] PGM1 used as Direct output X10 output 7
[8] PGM2 used as Direct output X10 output 8

Magellan 13
[092] Arming/Disarming Options Bold = Default setting
Option OFF ON
[1] Auto-arm on time ( )Disabled Enabled
[2] Auto-arm on no movement Disabled Enabled
[3] Auto-arm in what arming mode Regular Stay
[4] Switch to Stay arming if no entry delay is opened Disabled Enabled
[5] Regular arming switches to Force arming Disabled Enabled
[6] Stay arming switches to Force arming Disabled Enabled
[7] One-touch Regular/Force arming Disabled Enabled
[8] One-touch Stay arming Disabled Enabled
[093] Arming/Disarming Options Bold = Default setting
Option OFF ON
[1] Future use Future use Future use
[2] Future use Future use Future use
[3] Bell squawk when arming/disarming with remote control Disabled Enabled
[4] No exit delay when arming with remote control Disabled Enabled
[5] Report system disarming Always After alarm only
[6] Exit delay termination Disabled Enabled
[7] Follow zones become Entry Delay 2 zones when Delay zone is
bypassed
Disabled Enabled
[8] FM tuner ON when system is armed ( )Disabled Enabled
J[8] J[2]
J[8] J[1]

14 Programming Guide
[094] Zone Options Bold = Default setting
Option OFF ON
[1] Stay delay zones Disabled Enabled
[2] Report zone restore On Bell cut-off On zone closure
[3] & [4] Tamper recognition options See table
See table
See table
See table
[5] Generate tamper trouble if detected on bypassed zone No Yes
[6] & [7] Wireless transmitter supervision options See table
See table
See table
See table
[8] Generate supervision trouble if detected on bypassed zone No Yes
[095] Zone Options Bold = Default setting
Option OFF ON
[1] Zone 15 is hardwire zone 1 Disabled Enabled
[2] Zone 16 is hardwire zone 2 Disabled Enabled
[3] EOL (End-Of-Line) resistors No EOL Use EOL resistors
[4] to [8] Future use Future use Future use
[3] [4]
OFF OFF - Disabled
OFF ON - Trouble only
ON OFF - Disarmed: Trouble only
- Armed: Follow zone’s alarm type (page 8)
ON ON - Disarmed: Audible alarm
- Armed: Follow zone’s alarm type (page 8)
[6] [7]
OFF OFF - Disabled
OFF ON - Trouble only
ON OFF - Disarmed: Trouble only
- Armed: Follow zone’s alarm type (page 8)
ON ON - Disarmed: Audible alarm
- Armed: Follow zone’s alarm type (page 8)

Magellan 15
[096] General Options Bold = Default setting
Option OFF ON
[1] & [2] Doorbell 1 tone options See table
See table
See table
See table
[3] & [4] Doorbell 2 tone options See table
See table
See table
See table
[5] Daylight savings time Disabled Enabled
[6] AC power failure warning Disabled Enabled
[7] Check-in supervision time 24Hrs 80 minutes
[8] Future use Future use Future use
[097] Reserved for future use
[1] [2]
OFF OFF - Tone 1
OFF ON - Tone 2
ON OFF - Tone 3
ON ON - Tone 4
[3] [4]
OFF OFF - Tone 1
OFF ON - Tone 2
ON OFF - Tone 3
ON ON - Tone 4

16 Programming Guide
[098] Dialer Options Bold = Default setting
Option OFF ON
[1] & [2] Telephone line monitoring options See table
See table
See table
See table
[3] Switch to pulse on 5th attempt Disabled Enabled
[4] Call back Disabled Enabled
[5] Alternate dialing Disabled Enabled
[6] Force dial Disabled Enabled
[7] DTMF dialing Disabled Enabled
[8] Pulse ratio 1:2 1:1.5
[099] Dialer Options 2 Bold = Default setting
Option OFF ON
[1] Use central station telephone number 2 as Regular Backup
[2] to [8] Future use Future use Future use
[1] [2]
OFF OFF - TLM disabled
OFF ON - Generate a trouble
ON OFF - Generate audible alarm if armed
ON ON - Silent alarms become audible

Magellan 17
[100] Event Call Direction Options for Bold = Default setting
Arming / Disarming Report Codes
Option OFF ON
[1] Call central station telephone number 1 Disabled Enabled
[2] Call central station telephone number 2 Disabled Enabled
[3] Call Pager telephone number Disabled Enabled
[4] Future use Future use Future use
Alarm / Alarm Restore Report Codes
[5] Call central station telephone number 1 Disabled Enabled
[6] Call central station telephone number 2 Disabled Enabled
[7] Call Pager telephone number Disabled Enabled
[8] Future use Future use Future use
[101] Event Call Direction Options for Bold = Default setting
Tamper / Tamper Restore Report Codes
Option OFF ON
[1] Call central station telephone number 1 Disabled Enabled
[2] Call central station telephone number 2 Disabled Enabled
[3] Call Pager telephone number Disabled Enabled
[4] Future use Future use Future use
Trouble / Trouble Restore Report Codes
[5] Call central station telephone number 1 Disabled Enabled
[6] Call central station telephone number 2 Disabled Enabled
[7] Call Pager telephone number Disabled Enabled
[8] Future use Future use Future use

18 Programming Guide
[102] Event Call Direction Options for Bold = Default setting
Special Report Codes
Option OFF ON
[1] Call central station telephone number 1 Disabled Enabled
[2] Call central station telephone number 2 Disabled Enabled
[3] Call Pager telephone number Disabled Enabled
[4] to [8] Future use Future use Future use
[103] Wireless Transmitter Supervision Zone Options Bold = Default setting
Option OFF ON
[1] Zone 1 supervision Disabled Enabled
[2] Zone 2 supervision Disabled Enabled
[3] Zone 3 supervision Disabled Enabled
[4] Zone 4 supervision Disabled Enabled
[5] Zone 5 supervision Disabled Enabled
[6] Zone 6 supervision Disabled Enabled
[7] Zone 7 supervision Disabled Enabled
[8] Zone 8 supervision Disabled Enabled
[104] Wireless Transmitter Supervision Zone Options Bold = Default setting
Option OFF ON
[1] Zone 9 supervision Disabled Enabled
[2] Zone 10 supervision Disabled Enabled
[3] Zone 11 supervision Disabled Enabled
[4] Zone 12 supervision Disabled Enabled
[5] Zone 13 supervision Disabled Enabled

Magellan 19
Communicator Settings
[104] Wireless Transmitter Supervision Zone Options Bold = Default setting
Option OFF ON
[6] Zone 14 supervision Disabled Enabled
[7] Zone 15 supervision Disabled Enabled
[8] Zone 16 supervision Disabled Enabled
Section Data Description
[105] ____/____/____ Report format for central station telephone number 1 ( )
[106] ____/____/____ Report format for central station telephone number 2 ( )
[107] ____/____/____/____ Account number ( )
[108] ____/____/____/____ Panel identifier (for use with WinLoad software) ( )
[109] ____/____/____/____ Panel password (for use with WinLoad software) ( )
[110] Reserved for future use
[111] Central station telephone number 1 (32 digits maximum; if less than 32, press [#] to accept) ()
___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___
J[4] J[3]
J[4] J[3]
001 = Ademco slow (1400Hz 10BPS); 002 = Silent Knight (1400Hz 20BPS);
003 = SESCOA (2300Hz 20BPS); 004 = Ademco Contact ID (default); 005 = SIA FSK
J[4] J[3]
J[4] J[8]
J[4] J[8]
J[4] J[3]

20 Programming Guide
*Using Magellan’s speakerphone feature, the Service telephone number allows the user to directly call the installer or maintenance staff if any problems
arise.
[112] Central station telephone number 2 (32 digits maximum; if less than 32, press [#] to accept) ()
___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___
[113] Pager Telephone # (32 digits maximum; if less than 32, press [#] to accept) ()
___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___
[114] Numeric message sent with Pager Reporting (32 digits maximum; if less than 32, press [#] to accept) ()
___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___
[115]
to
[117]
Reserved for future use
[118] PC telephone number for WinLoad (32 digits maximum; if less than 32, press [#] to accept)
___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___
[119] Service telephone number*(32 digits maximum; if less than 32, press [#] to accept) ()
___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___
Section Data Description
J[4] J[3]
J[4] J[3]
J[4] J[3]
J[4] J[3]