Mainstays 9448WWWM User manual

1-800-892-3986 IS8444
Pg 1 of 28
MCS 6/03/2019
Assembly Instructions
Model
9448WWWM (White)
For Spanish and French instructions, start on page 15.
Para instrucciones en español y francés, comience en la página 15.
Pour les instructions espagnoles et françaises, commencez à la page 15.

1-800-892-3986 IS8444
Pg 2 of 28
Before You Begin:
Thank you for purchasing this product. Please identify all parts and hardware
pieces before you begin. When laying out parts, place them on a soft surface
to prevent scratching.
If any pieces are missing, call our Toll Free Number 1-800-892-3986 between
8:00AM-5:00PM EST Monday through Friday.
Cleaning Note:
Cleaning with a dry cloth may be sufficient, but for other stains or marks wipe
gently with a damp cloth.
DO NOT use strong detergents or abrasive cleaners, they may damage the
surface of this product.
It is imperative that the unit be fastened
to the wall for safety and stability.
For safety reasons, it is imperative
to use a stepladder.
Tools Needed - not included

1-800-892-3986 IS8444
Pg 3 of 28
ATop and Middle Shelf 2
BTop Side Panel 2
CBottom Side Panel (1 right and 1 left) 2
DBottom Shelf 1
List of Parts
ETrim Piece 1
FAdjustable Shelf 3
GDoor 1
HBack Panel 1
A
H
B
C-R
E
F
C-L
D
G
A
B
F
F

1-800-892-3986 IS8444
Pg 4 of 28
Large Screw
Allen Wrench for
use with Large Screws (H2) x 1
x 24
Nail x 40
H 1
H 2
H 3
List of Hardware
Cambolt x 2
Plastic Snap Cam x 2
H 4
H 5
Hinge Screw
Hinge Bushing
Hinge
x 4
x 4
x 4
H 6
H 7
H 8
Magnet
Magnet Screw
x 1
x 2
H 10
H 9
Knob Screw
Knob x 2
x 2
H 11
H 12

Nylon Strap x 1
1-800-892-3986 IS8444
Pg 5 of 28
List of Hardware - continued
Magnet Strike
Magnet Strike Screw
x 2
x 2
H 13
H 14
Dowel x 8
H 15
Sheet of 6 stickers x 3
H 16
Screw Cap x 8
H 17
Shelf Clip x 12
H 18
Wall Mount Kit
Washer
Anti-tip Screw x 1
x 2

1-800-892-3986 IS8444
Pg 6 of 28
Step 1 - Attaching the Top Shelf.
Step 2 - Installing the Cambolts and Dowels.
x 4
x 12
H 4 H 15
H 2
H 2
A
B
B
A
finished edge
H 15
H 4
H 15
H 4
H 15
x 4
H 1 H 2
finished edge
• NOTE: DO NOT OVERTIGHTEN CAMBOLTS (H4)!

1-800-892-3986 IS8444
Pg 7 of 28
Step 3 - Attaching the Middle Shelf.
Step 4 - Attaching the Bottom Left Side Panel.
A
B
B
A
x 4
H 1 H 2
H 2
finished edge
H 2
x 2
H 1 H 2
finished edge
NOTE:
ALL holes on bottom shelf (D)
face UP.
H 2
H 15
C-L
D
E
H 2
x 2
H 15

1-800-892-3986 IS8444
Pg 8 of 28
Step 5 - Installing the Magnet.
Step 6 - Attaching the Bottom Right Side Panel.
x 1 x 2
H 10
H 9
finished edge
C-R
H 9
H 10
finished edge
C-R
H 2
H 15
H 2
x 2
H 1 H 2
x 2
H 15

1-800-892-3986 IS8444
Pg 9 of 28
Step 7 - Attaching the Top assembly to the Bottom assembly.
top assembly
bottom assembly
RECOMMEND
x 5
H 5
• Carefully place the top assembly onto the bottom assembly. NOTE: Be sure to align the cambolts (H4) with
the holes in bottom side panels (C).
• Insert snap cams (H5) into the holes in the bottom side panels (C). NOTE: If necessary, lightly tap the
snap cams with a hammer.
• Apply screw caps (H17) to screws (H2) on exterior of unit.
H 5
H 5
H 17
x 17
H 17
C-R
C-L

1-800-892-3986 IS8444
Pg 10 of 28
long end at the
top
Step 8 - Attaching the Back Panel.
x 25
H 3
• Carefully lay the unit face down on floor with the unfinished edges facing up.
• Fasten back panel (E) to back of unit.
• Helpful Hint: With the seam side of back panel facing up align the back panel properly, fasten a nail in
each of the corners of the back panel first.
H
unfinished edges
unfinished edges