Mainstays CONRAD MS18-D1-1007-18 User manual

1PB
model# MS18-D1-1007-18
model# MS18-D1-1007-19
model# MS18-D1-1007-20
model# MS18-D1-1007-59
Lot#_________Date________
Customer Service:
1.877.436.7290
[email protected]
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
white
whitewash/white
dark brown/black
black
Manufactured By:
BDDMI
1321 Tyler St NE, Minneapolis, MN 55413
Assembly Instructions
CONRAD ACCENT TABLE

2
TOP PANEL
FRONT LEG
BACK LEG
A
B
C
Before you begin:
1. Check for damaged or missing parts.
2. Use the carton as a working surface to prevent product damage during assembly.
PARTS LIST

2 3
HARDWARE LIST
CAUTION:
1. Make sure the screws go through the pre-drilled holes properly.
2. Do not over tighten bolts.
3. Allen Wrench
x1
4. Washer
x2
1. Small Bolt
x4
2. Large Bolt
x2

4
x2 x1 x2
STEP 1
1. Do not over tighten bolts.
2. Large Bolt 3. Allen
Wrench
4. Washer
NOT TO SCALE. REFER TO PAGE 3 FOR ACTUAL SIZE HARDWARE.

4 5
x4 x1
STEP 2
1. Do not over tighten bolts.
1. Small Bolt 3. Allen
Wrench
NOT TO SCALE. REFER TO PAGE 3 FOR ACTUAL SIZE HARDWARE.

6
20 lbs. / 9.1 kg.
WARNING: Do not exceed the maximum load capacity. Exceeding the maximum load capacity may result in
collapse and possible injury.
Furniture Care Instructions:
Dust with clean, lint-free cloth.
Use furniture spray polish as needed.
Customer Service:
877.436.7290
[email protected]
Your complete satisfaction is our number 1 priority. Our product is designed and manufactured to meet the
highest quality of standards. In the event that you have assembly questions, or parts are missing or damaged,
our customer service department would appreciate the opportunity to assist you.
This product carries a one (1) year warranty against defects in workmanship and materials. Defective product
will be replaced free of charge within the stated warranty period, when returned by the original purchaser with
proof of purchase. This product is not guaranteed against wear or breakage due to misuse and/or abuse. Please
contact our Customer Service at 1-877-436-7290 to obtain information on warranty performance. This warranty
gives you specic legal rights and you may also have other rights which vary from State to State.

1PB
model# MS18-D1-1007-18
model# MS18-D1-1007-19
model# MS18-D1-1007-20
model# MS18-D1-1007-59
Lot#_________Fecha_______
Servicio al Cliente:
1.877.436.7290
[email protected]
ESTE MANUAL DE INSTRUCCIONES CONTIENE INFORMACIÓN IMPORTANTE DE SEGURIDAD.
POR FAVOR LEA Y GUARDE PARA REFERENCIA FUTURA.
blanco
blanqueado/blanco
marrón oscuro/negro
negro
Fabricado Por :
BDDMI
1321 Tyler St NE, Minneapolis, MN 55413
MESA DE ACENTO CONRAD
Instrucciones de Ensamble

2
PANEL SUPERIOR
PATA FRONTAL
PATA POSTERIOR
A
B
C
Antes de comenzar:
1. Compruebe si hay piezas dañadas o faltantes.
2. Utilice la caja de cartón como supercie de trabajo para evitar daños al producto durante el montaje.
LISTA DE PARTES

2 3
LISTA DE ARTÍCULOS DE FERRETERÍA
PRECAUCIÓN:
1. Cerciórese que los tornillos pasen por los agujeros pretaladrados de manera apropiada.
2. No sobreapriete los tornillos.
3. Llave Allen
x1
4. Arandela
x2
2. Perno Largo
x2
1. Perno Pequeño
x4

4
x2 x1 x2
PASO 1
1. No sobreapriete los tornillos.
2. Perno
Largo
3. Llave
Allen
4. Arandela
NO ESTÁ A ESCALA. CONSULTE LA PÁGINA 3 FOR HARDWARE DE TAMAÑO REAL.