Mainstays FOREST HILLS MSS129900298046 User manual

MSS129900298046
MSS129900298047
MSS129900298048
Need Assistance?
ASSEMBLY AND CARE GUIDE
MAINSTAYS FOREST HILLS 3 PIECE PATIO
BISTRO SET
Contact our toll free Customer Service Hotline at:
[phone]
-Monday through Friday 7:30am until 3:30pm PST-

Warranty
2 YEAR LIMITED WARRANTY
WHAT IS COVERED
We warrant the frame to be free of manufacturing defects to the original purchaser for two years.
WHAT IS NOT COVERED
This warranty does not cover commercial use, hardware, acts of nature, fire, freezing, and abusive use. In
addition, purchased parts are not covered under this warranty. We reserve the right to make substitutions
with similar merchandise, if the model in question is no longer in production.
Important Safety Instructions
PLANNING ASSEMBLY
Read all instructions before assembly
To avoid damanging this product, assembly it on a soft non-abrasive surface such as carpet or carboard.
NOTE: More than one person may be required to assemble this product.
Attention
○Use the correct bolts as indicated. Do not tighten any of the bolts until the product is completely assembled
○Do not discard of any of the packaging until you have checked that you have all of the parts and fittings
required
○Keep children away during assembly. This item contains small parts that can be swallowed by children.
Children should always be under direct adult supervision while using this product.
○Retain these assembly instruction for future reference.
1
MSS129900298046
MSS129900298047
MSS129900298048

A. Read instructions thoroughly. Acquaint yourself with the inventory of parts and the accompanying
drawings to ensure safe and proper assembly.
B. Lay out all of the parts on a flat surface and identify them using the table below.
C. One ratchet tool is provided used for installation.
2
No. Qty Picture
AX 1
4
1
8
4
Y
Z
DD
EE
GG
GG
FF
B
C
1*2
1*2
1*2
1*2
D
E
BB
CC
Left Armrest
Right Armrest
Seat
Tabletop
Leg
Leg Fixture Bracket
ST4.8*13
Leg Connector Bracket 2
Leg Connector Bracket 1
Bolt
M6X25
Bolt
M6X15
Bolt
M6X45
LEVELER
Bolt
M6X35
Ratchet Tool Ratchet Tool
AA
1*2
8*2
2*2
2*2
2*2
Single chair*2
No. Qty Picture
Table
MSS129900298046
MSS129900298047
MSS129900298048

Assembly
Single chair
3
Step 1: Attach seat(C),leg connector bracket 1(D) to the right armrest(B) using two bolts(AA),one bolt(BB) at
front and one bolt(CC) at the rear.
Step 2: Attach assembled seat(C) with right armrest(B) and leg connector bracket1(D) to left armrest(A) using
two bolts(AA), one bolt(BB) at front and one bolt(CC) at the rear.
Step 3: Attach leg connector bracket 2(E) to left and right armrest(A&B) using four bolts(AA) and ratchet tool
(GG). Attach the levelers(FF) to make the chair stable.
Note: Do not tighten bolts until all parts are connected
Step 1.
Step 3.
Step 2.
MSS129900298046
MSS129900298047
MSS129900298048

Assembly
Step 1:
Step 2:
Note: Do not tighten bolts until all parts are connected.
You will need a Phillips Screwdriver.
Step 1. Step 2.
Table
Insert leg(Y) into the joint on table frame(X) and tighten screws(EE).
Assemble leg fixture bracket(Z) to legs(Y) using bolts(DD) and ratchet tool(GG).
4
Maintenance
We recommend the use of furniture covers when not in use.
In order to prolong the life and beauty of your furniture , we recommend that it be stored in a dry and
protected area during off season periods.
.
○
○
○
Inspect and tighten all bolts and fasteners on a regular basis to ensure the proper performance and
safety of your product.
MSS129900298046
MSS129900298047
MSS129900298048