Mainstays Auden 3 SE User manual

page 1
Mainstays Auden 3 SE
Contact Hillsdale Furniture for parts / 502-562-0000 / https://hillsdalefurniture.com/Main/Home/ContactUs
LOT NUMBER: DATE PURCHASED: / /
Made in Vietnam
658484949 Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recomended to ensure that all
components are in proper position, tight and free from damage. THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY
INFORMATION. PLEASE READS AND KEEP FOR FUTURE REFERENCE. Adult assembly is required.
For immediate help with assembly or product information
call our toll-free number:
1-800-243-9758
Mon - Fri 9:00 am to 5:00 pm Eastern Time

Version 2.0 ; Date : 02-26-2023

page 2
Contact Hillsdale Furniture for parts / 502-562-0000 / https://hillsdalefurniture.com/Main/Home/ContactUs
DANGER
•Risk of suffocation! •
Keep any packaging materials away from children.
Before Getting Started
• Read the instructions carefully prior to
assembling the product.
• Carefully remove all packaging materials and
retain for future use.
• Choose a clean, level, spacious assembly area.
Avoid hard surfaces that may damage the
product.
• Ensure that you have all required contents for
complete assembly.
• Take care when lifting. Assemble the product in
close proximity to where you intend to position
the item.
• Do not over tighten the screws and bolts and
be careful using power tools as they may
damage the threads.
sure it is stable before use.
• Please do not completely tighten bolts and/or
screws until assembly is finished.
Cleaning & Maintenance
• Keep the product away from direct heat and
sunlight.
• Prolonged exposure to heat sources may
cause glazing, melting and scorching, or even
cause color to fade.
• Regular vacuuming or light brushing helps to
remove dirt and prevent soil build-up, which
increases the appearance wear.
• Periodically (every 90 days) make sure that the
screws are fully tightened.
Metal Furniture Care Instructions
• For everyday cleaning, chrome, brass,
aluminum, and painted metal surfaces can be
kept looking their best by wiping with a slightly
damp, soft cotton cloth,or vacuum cleaner
brush.
• If soiled, wipe with clean sponge or cloth wrung
out of water. Wipe dry with cloth or paper towel
to avoid water spots.
• Do not use any harsh abrasives or chemicals to
clean any metal surfaces as it may damage the
protective coating.
product is exposed to excessive humidity,
particularly in salt water locations.
• Liquid spills should be removed immediately.
Using a soft clean cloth, blot the spill gently.
Avoid rubbing.
Version 2.0 ; Date : 02-26-2023

Part List
A 1
B2
C 1
D 2
E 1
F 4
G 1
CONTENTS
Before getting started, ensure the package
contains the following components:
PARTS
page 3
LR
L R
Back rest
Left and Right Arm rest
Seat frame
Left and Right Back Cushion
Middle Back Cushion
Plastic leg
Center leg
ABC
DE
F
G
Back rest Left and Right Arm rest Seat frame
Left and Right Back Cushion Middle Back Cushion Plastic leg
Center leg
Contact Hillsdale Furniture for parts / 502-562-0000 / https://hillsdalefurniture.com/Main/Home/ContactUs Version 2.0 ; Date : 02-26-2023

HARDWARE
3.5m / 12"
DO NOT USE POWER TOOLS TO ASSEMBLE THIS PRODUCT. USE OF POWER TOOLS WILL INVALIDATE ANY CLAIM AND MAY
DAMAGE THIS PRODUCT MAKING IT UNSAFE.
TOOLS REQUIRED FOR ASSEMBLY (NOT INCLUDED)
page 4
1. Bolt 5/16” x 90mm 2. Flat washer 5/16” x 22mm
6 x 6 x
3. Hex nut 5/16”
6 x
4. Wrench
1 x
Note: Hardware pack are place underneath of the sofa
A
D
E
D
B
B
Hardware Box
C
HARDWARE PLACEMENT
Contact Hillsdale Furniture for parts / 502-562-0000 / https://hillsdalefurniture.com/Main/Home/ContactUs Version 2.0 ; Date : 02-26-2023

STEP 2
Assembly
STEP 1
page 5
1
x 6
Bolt 8mm x 90mm
BB
2
x 6
Flat washer 8mm x 22mm
3
x 6
Hex nut M8
1
x6
1
1
1
1
1
1
x6
4
32
2
2
3
3
4
B
B
C
Open up the bottom cover
Open up the bottom cover
Left Arm Rest
Right Arm Rest
Contact Hillsdale Furniture for parts / 502-562-0000 / https://hillsdalefurniture.com/Main/Home/ContactUs
Install the Bolts on Part (left and right side of the armrest) as per the diagram.
Turn clockwise until tight.
1B
Prepare section . Open the cover at the bottom starting from the top.
Then pair Part from the right and left sides.
Make sure that the Bolt fits completely into the hole.
Tighten the bolt from the inside using a washer and Hex nut . Use the Wrench provided.
C
B
1
234
Version 2.0 ; Date : 02-26-2023

Assembly
STEP 3
STEP 4
page 6
F
F
F
F
F
G
G
x4
F
Close the bottom cover
Contact Hillsdale Furniture for parts / 502-562-0000 / https://hillsdalefurniture.com/Main/Home/ContactUs
Re-seal the cover fabric and attach the velcro perfectly.
Assemble the plastic legs as well as the center leg
as in the diagram. Make sure the plastic legs are all in parallel.
Rotate clockwise to install.
FG
Version 2.0 ; Date : 02-26-2023

Assembly
STEP 5
page 7
A
C
Contact Hillsdale Furniture for parts / 502-562-0000 / https://hillsdalefurniture.com/Main/Home/ContactUs
Installing the backrest . Insert from the top, align the bracket position and press down until it is tight.
A
Version 2.0 ; Date : 02-26-2023

Assembly
STEP 6
page 8
Stretch and pull down rear cover of seat cushion evenly
before securing velcro strip to the back rest.
Repeat if necessary for better fit
Contact Hillsdale Furniture for parts / 502-562-0000 / https://hillsdalefurniture.com/Main/Home/ContactUs Version 2.0 ; Date : 02-26-2023

Assembly
STEP 7
page 9
STEP 8
A
C
DD
E
Left Back Cushion Right Back Cushion
Contact Hillsdale Furniture for parts / 502-562-0000 / https://hillsdalefurniture.com/Main/Home/ContactUs
Place the back cushions left , middle and right .
DED
Version 2.0 ; Date : 02-26-2023