Maiwe MIGE3028-4GF User manual

MIGE3028-4GF Serial
Rack Mounted Industrial Ethernet Switch
User Manual
(Edition: V1.0)
Wuhan Maiwe Communication Co., Ltd.

MIGE3028-4GF Serial Rack Mounted Industrial Ethernet Switch
I
Trademark
This trademark is owned by Wuhan Maiwe
Communication Co., Ltd.
Mwring is the trademark used for link redundancy and self-recovery
technology, owned by Wuhan Maiwe Communication Co., Ltd.
Microsoft and Windows is registered trademark owned by Microsoft.
Copyright
Copyright © Wuhan Maiwe Communication Co., Ltd.
Clarification
The user manual is applicable to MIGE3028-4GF series managed rack
industrial ethernet switch.
Please read the following license agreement carefully before using this manual.
The products described in this manual can be used only if you agree on the
following license agreement.
Important Statement
Any information provided by our company in this manual does not represent for
corresponding authorization on these information.
Our company attempts to ensure the accuracy and applicability for the
information provided in this manual, however our company does not assume
any responsibility for the use of these information, and does not assume any
joint responsibility for the use of these information. There may be a few
technical or typographical errors in the product and manual. The company
reserves the right to change all or part of this manual without prior notice.
Statement
Due to continuous update and improvement of products and
technology, the contents of this document may not be completely
consistent with the actual products, appreciate for your understanding.
If necessary to inquiry the updates of the product, please check our
official website or contact our representative directly.
Revision history:
Version
Date
Reason
V1.0
2016.1
Document creation

MIGE3028-4GF Serial Rack Mounted Industrial Ethernet Switch
II
Safe Use Instruction
This product performance is excellent and reliable in the designed range of use,
but it’s necessary to avoid man-made damage or destroy for the
equipment.
Read the manual carefully and keep this manual for reference if need
afterwards.
Do not put the device close to the water sources or damp places.
Do not put anything on the power cable, it should be placed out of reach.
To avoid causing fire, do not knot or wrap the cable.
Power connector and other device connectors should be firmly
connected with each other, frequently inspection is needed.
Please keep the fiber socket and plug clean. Do not look directly at the
fiber section when the equipment is working.
Please keep the equipment clean and wipe it with a soft cotton cloth if
necessary.
Please do not repair the equipment by yourself, unless there is clear
instructions in the manual.
Under the following circumstances, please cut off power immediately and
contact us.
Equipment water damage.
The equipment is broken or the casing is broken.
The equipment works abnormally or the performance has completely
changed.
The equipment produces odor, smoke or noise.
Statement: Information requiring explanation in use of the managed software.
Attention: Matters requiring specific attention in the use of the managed
software.

MIGE3028-4GF Serial Rack Mounted Industrial Ethernet Switch
III
Catalogue
1. System Overview....................................................... - 1 -
1.1. Product Introduction.................................................................... - 1 -
1.2. Characteristic................................................................................ - 1 -
1.2.1. Industrial Network Performance.......................................................- 1 -
1.2.2. Industrial Application Design............................................................ - 1 -
1.3. Packing List................................................................................... - 2 -
1.4. Performance Specification.........................................................- 2 -
2. Hardware Installation and Networking.................- 3 -
2.1. Hardware Structure..................................................................... - 3 -
2.1.1. System Structure................................................................................- 3 -
2.1.2. Machine Structure..............................................................................- 3 -
2.2. Hardware Installation.................................................................. - 8 -
2.2.1. Installation Requirements................................................................. - 8 -
2.2.2. Host Installation..................................................................................- 9 -
2.2.3. Cable Connection............................................................................ - 10 -
2.2.4. Fiber Optic Connection....................................................................- 11 -
2.2.5. Laying Cable.....................................................................................- 11 -
2.3. Simple Test..................................................................................- 12 -
2.3.1. System Self-test...............................................................................- 12 -
2.3.2. Tx Port Test.......................................................................................- 12 -
2.3.3. Fx Port Test.......................................................................................- 14 -
3. Repair and Service.................................................. - 15 -
3.1. Internet Service..........................................................................- 15 -
3.2. Technical Support Telephone Service...................................- 15 -
3.3. Product Repair or Replacement.............................................- 15 -

MIGE3028-4GF Serial Rack Mounted Industrial Ethernet Switch
- 1 -
1. System Overview
1.1. Product Introduction
MIGE3028-4GF series rack industrial Ethernet switches manufactured by
Wuhan Maiwei Photoelectric Technology Co., Ltd. are designed and developed
for industrial high-speed communication network applications. This series of
switches is used for simple application in plug-and-play mode. All electrical
ports support auto-negotiation, 10/100Mbps full-duplex and half-duplex, and
Auto-MDI/MDI-X.
This series of switches provides four hot-swap SFP Gigabit
optical/electrical interfaces for external SFP Gigabit optical modules or
electrical modules. The backplane bandwidth of the switch is 12.8Gbps, and
both support 8K MAC address tables.
1.2. Characteristic
1.2.1. Industrial Network Performance
Real-time broadcast storm suppression
Redundant dual power input, power failure alarm to meet high availability
requirements
Storage and forwarding mechanism, the switch backplane bandwidth is
12.8Gbps
10/100M Tx port, full / half duplex, Auto-MDI/MDI-X adaptive working
mode
100M Fx port is forced to 100M full-duplex working mode
Gigabit port is forced to 1000M full-duplex working mode
Full-duplex flow control and half-duplex back pressure flow control
Can work without failure in a strong electromagnetic interference
environment
1.2.2. Industrial Application Design
Rack mount
Industrial grade redundant dual power input design
Relay power failure alarm
Port changeover connection for quick recovery
100M Fx port can be equipped with 100Base-FX different transmission
distances, different types of optical interfaces
Supports 4 hot-swap Gigabit SFP interfaces, which can be connected to
Gigabit optical modules or electrical modules