Makita Gas nailer GN900SE User manual

Satisfying the professional’s needs
Gas nailer GN900SE
First fix cordless framing nailer
The new gas nailer designed for the demands of the professional.
Suitable for timber frames, roofing, joist and a host of other applications
Makita now have a better solution with this easily portable machine.

7.2v Li-ion battery
Use of a li-ion battery allows
for compact and lightweight
tool design. 30 min charge time.
Hex wrench
Attached to the machine for
easy access to adjust the depth
of the nail drive.
Gas cell chamber
Quick and easy load system.
LED light
service indicator
Green: Good battery
Red: Low/dead battery
Orange: Error codes
Battery BL7010 Charger DC07SA
Gas nailer GN900SE
Fire up to 7,200
nails per hour.
The Makita clipped head gas nailer has arrived!
Using tried and tested technology. It is suitable
for timber frames, roofing, joist and a host of
other applications we now have the answer,
in an truly portable machine.
No leads, no hoses, just fast and versatile power.
The GN900SE uses our tried and tested Lithium-ion
7.2 volt battery system with a 30 minute charge time
which makes the Makita GN900SE four times quicker
than the leading competitor. The small and light
weight 7.2 volt battery will allow you to fire up to 4000
nails per charge. The GN900SE features our LED
low battery and error detection system, and a shock
absorbing battery fitting to protect the terminals
The 40 gram gas cell will allow you to fire up to 1200
shots per cell using our 34ºnail and gas packs at a
rate of 2-3 nails per second.
In true Makita tradition the gas nailer is light weight,
comfortable and perfectly balanced, it is also easy
to use and well engineered. All that you have come
to expect from Makita.
Charges 4 times quicker
than the leading competitor.
The only gas nailer with
Lithium-ion battery technology
30 minute
charge time

Contact nose
5 stage depth adjustment
and anti slip contact.
Air filter
Protects cylinder from dirt and
debris to prevent malfunction.
44 nail magazine
Will hold 50mm - 90mm nails
with easy view quick load system.
Hook
Easily clipped on to
a belt or extends
to sit over small
joists and scaffolding.
Smooth bright
Galvanised
Hot Dip Galvanised
Good for use on internal jobs where
there is no or very little exposure to
moisture. Use on non permanent
work such as shuttering.
The most popular as it gives good
protection against corrosion and can
be used for most applications.
Recommended for use on external
work or where corrosion could
damage the finish or integrity
of the joint.
TYPE EXPLANATION
Smooth
Ring
Unilock
The most common nail, it can be
used for most joints.
Identified by the rings around the
shaft, these nails are generally used
where a very strong joint is required.
A cross between Smooth and
Ring types, for use where a
medium strength joint is required.
TYPE EXPLANATION
Choosing the correct nail Choosing the correct shank
Subject to
normal terms
and
conditions

Satisfying the professional’s needs
Makita UK
Michigan Drive, Tongwell, Milton Keynes, Buckinghamshire MK15 8JD
T: 01908 211678 F: 01908 211400
www.makitauk.com
Nails Bright
194764-7 Clipped Head 2.9 x 51 Ring Bright 3,300
194772-8 Clipped Head 2.9 x 63 Ring Bright 3,300
194776-0 Clipped Head 3.1 x 75 Ring Bright 2,200
194767-1 Clipped Head 3.1 x 90 Smooth Bright 2,200
Nails Galvanised
194765-5 Clipped Head 2.9 x 51 Ring Galvanised 3,300
194766-3 Clipped Head 2.9 x 57 Ring Galvanised 3,300
194768-9 Clipped Head 2.9x63 Ring Galvanised 3,300
194770-2 Clipped Head 3.1 x 63 Ring Galvanised 2,200
194773-6 Clipped Head 3.1 x 75 Ring Galvanised 2,200
194777-8 Clipped Head 3.1 x 90 Smooth Galvanised 2,200
Nails Hot Dip Galvanised
194769-7 Clipped Head 2.9 x 63 Ring Hot Dip Galvanised 3,300
194771-0 Clipped Head 3.1 x 63 Ring Hot Dip Galvanised 2,200
194774-4 Clipped Head 3.1 x 75 Ring Hot Dip Galvanised 2,200
194775-2 Clipped Head 3.1 x 75 Unilock Hot Dip Galvanised 2,200
194778-6 Clipped Head 3.1 x 90 Smooth Hot Dip Galvanised 2,200
PART NUMBER DESCRIPTION QUANTITY
Nail and fuel packs
2,200 pcs includes 2 gas canisters
3,300 pcs includes 3 gas canisters
Nail Bright
194780-9 Clipped Head 2.9 x 51 Ring Bright 1,100
194784-1 Clipped Head 2.9 x 63 Ring Bright 1,100
Nails Galvanised
194782-5 Clipped Head 2.9 x 51 Ring Galvanised 1,100
194785-9 Clipped Head 2.9 x 63 Ring Galvanised 1,100
194788-3 Clipped Head 3.1 x 63 Ring Galvanised 1,100
194792-2 Clipped Head 3.1 x 75 Ring Galvanised 1,100
194796-4 Clipped Head 3.1 x 90 Smooth Galvanised 1,100
Nails Hot Dip Galvanised
194783-3 Clipped Head 2.9 x 57 Ring Hot Dip Galvanised 1,100
194786-7 Clipped Head 2.9 x 63 Ring Hot Dip Galvanised 1,100
194790-6 Clipped Head 3.1 x 63 Ring Hot Dip Galvanised 1,100
194793-0 Clipped Head 3.1 x 75 Ring Hot Dip Galvanised 1,100
194797-2 Clipped Head 3.1 x 90 Smooth Hot Dip Galvanised 1,100
PART NUMBER DESCRIPTION QUANTITY
Job packs
1,100 pcs includes 1 gas canister
98N315 0808