•This appliance MUST be installed by a Qualified Electrical Contractor in accordance with the local
regulations, and all local , State and National electrical codes. Any alterations or additions to building
wiring must be completed by a licensed electrical mechanic, or person authorised by legislation to work
on the fixed wiring of any electrical installation.
•The ceiling fan must be connected to a 240V AC 50Hz power supply.
•The fan must be installed so that the blades are at least 2.1 metres above the floor.
•The fan is to be correctly earthed.
•Before first using the setup, all electrical connections are to be checked in order to prevent any fall, fire
or electric shock.
•The structure that the ceiling fan is connected to must be capable of supporting a weight of at least 45kg. The
fixing must be able to support the moving weight of the fan and must not twist or work loose.
•Make sure that the insulation site will not allow the rotating fan blades to come into contact with any object
and that there is a minimum clearance of 150mm ( 6") from the blade tip to the wall or ceiling. Please note
that the greater this clearance is the better the airflow from your fan will be.
•DO NOT connect the fan motor to a dimmer switch for ( Optional Led Light Kit) . This may cause damage to
the motor .
Use ONLY the provided remote control unit provided with this unit.
•Do NOT Install the fan in a position where it could be exposed to water or moisture .
•This is not a DIY Product.
•This is a domestic product and should not be used for commercial trade or industrial purposes.
•The fan must be on the lowest speed before reversing the fan direction. This will prevent any damage to
the motor of the fan.
•Do not insert anything into the blades whilst they are spinning. This will damage the blades and upset the
balance of the fan causing it to wobble.
•After the fan is completely installed make sure that all base and fan fixings are secured and tightened to
prevent any problems.
•Because of the fan's natural movement, some connections may loosen. Check the support connections
brackets and blade attachments twice a year to make sure they remain tightened.
•Do NOT connect the LED fan light to a dimmer switch. the LED lights are non dimmable. ( For Optional
LED Light Kit)
GENERAL INFORMATION AND WARNINGS
Congratulations on choosing to buy a Quality Martec product.
All products brought to you by MARTEC ® are manufactured to the highest standards of performance and safety,
Your purchase is backed by our comprehensive 2 Year In-Home Warranty.
We hope you will enjoy using your purchase for many years to come.
General Information and Safety Instructions
Please read all instructions before commencing installation even it you feel you are quite familiar with this type of product.
THIS CEILING FAN MUST BE INSTALLED BY A QUALIFIED ELECTRICIAN, AND ELECTRICAL SAFETY
CERTIFICATE MUST BE ISSUED ON COMPLETION OF THE INSTALLATION.
