Masimo SafetyNet Radius T Manual

RadiusT °
Masimo Safetynet | Build 1.0.0.0
Radius T°
TM
3
Pair Sensor
Under Masimo SafetyNet
App Settings, enter the
Add Device menu,and
follow instructions for
pairing the Radius T°
sensor to your phone.
For additional resources,
including videos and instructions,
visit mymasimo.com
Setup Instructions
RadiusTTM°
GET TO KNOW
YOUR SYSTEM
Masimo SafetyNet™
Warning: Do not self-diagnose or self-medicate
on the basis of the measurements. Always consult
your doctor.
page 1 of 2
© 2020 Masimo. All rights reserved. 301644/8108B-0720
Remove plastic film from
the back of the sensor.
Apply adhesive sensor on the
upper chest below the left collar
bone as shown in diagram.
Apply Sensor
Before applying, make sure the application site on the chest is hair-free, clean and dry.
2
Remove sensor from pouch
and pull tab to activate battery.
1
Set-up Masimo
SafetyNet App
Follow instructions from
the email or text message
invitation to download the
Masimo SafetyNet App
and create an account.
Getting Started
see back for Daily Care & Activities
Radius TTM° Sensor
Worn on your chest, the sensor
measures body temperature
and sends your data to the
Masimo SafetyNet App.
Masimo
SafetyNet App
Masimo SafetyNet, collects and
displays continuous data from
paired wearable sensor. It also
sends data to your care provider.

Radius T°
TM
Daily Tasks on Phone
Example shown – Your screens may differ
Caring for Your Sensor
For additional resources, including videos and instructions, visit mymasimo.com
If battery light is orange
or red, this means that the
battery is close to depletion.
Sensor can be worn in
the shower but should
not be submerged.
If needed, to remove and reapply the sensor,
gently wipe the exposed adhesive with an alcohol
swab and allow to dry before reapplying.
page 2 of 2
From Activity Center, tap
icon to open the menu.
Tap “Live” to view your
live data from your sensor.
If your sensor is applied
correctly and connected,
you will see your live
data with number.
Select “Start” to begin your
CareProgram or “Resume”
to continue if you started
it on a previous day.
Select each item listed under
“Daily Items” to answer
question(s) from your
healthcare provider.
Answer the question that
pops up. Repeat until
you’ve completed all
“Daily Items” for each day.
Begin CareProgram™Check Connection Answer Questions