Mastech MS6580 User manual

TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK,
PRODCUT DAMAGE OR PERSONAL INJURY, PLEASE
FOLLOW THE SAFETY INSTRUCTIONS DESCRIBED
IN THE USER’S MANUAL.
MS6580
Non-Contact Voltage Test
Infrared Thermometer
USER’S MANUAL
01 02 03

04 05 06

1. Point the emperature ensor at the object to be
measured and hold the IRT button to start temperature
measurement. The meter displays the measured
temperature and activates the laser pointer and
displays icon.
2 Release the IRT button to hold the measurement on
the display. icon indicates measurement being held.
Note: During temperature measurement do not point
laser pointer towards anyone's eyes.
Note: To ensure the object to be measured is
completely inside the thermometer's field of view.
move the meter further away the larger the object
is D:S ratio:4:1.
Move the non-contact voltage probe near a charged
conductor and hold down the NCV botton and the display
show the following:
When the meter detects AC voltage, the meter will beep
and the LED next to the detection probe will flash..:
Note: Voltage may still exist even if there is no
indication. Do not solely rely on nan-contact
voltage detector to determine presence of
voltage. The measurement may be affected by the
design of the outlet, type of insulation and other
external factors.
4.4 Adjusting NCV sensitivity
While holding the NCV button press the IRT button to
change the sensitivity of the non contact voltage test. The
symbol represents the current sensitivity of the meter.
The default sensitivity is 4; pressing the IRT button while
holding the NCV button will decrease the sensitivity by l.
4.5 LED Flashlight
Hold the button to turn on the LED flashlight Release
the button to turn off flashlight.
R-00-05-0869