Master DH-716 Manual

Edition 17 - Rev. 6
DH 716 - DH 720
USER AND MAINTENANCE BOOK en
LIBRETTO USO E MANUTENZIONE it
BEDIENUNGS- UND WARTUNGSANLEITUNG de
MANUAL DE INSTRUCCIONES PARA EL USO Y MANTENIMIENTO es
MANUEL D’UTILISATION ET DE MAINTENANCE fr
HANDLEIDING VOOR GEBRUIK EN ONDERHOUD nl
MANUAL DE USO E MANUTENÇÃO pt
VEJLEDNING OM BRUG OG VEDLIGEHOLDELSE da
KÄYTTÖ- JA HUOLTO-OHJE 
HEFTE FOR BRUK OG VEDLIKEHOLD no
ANVÄNDAR- OCH UNDERHÅLLSHANDBOK sv
INSTRUKCJA OBSŁUGI I KONSERWACJI pl
РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ И ТЕХНИЧЕСКОМУ ОБСЛУЖИВАНИЮ ru
PŘÍRUČKA PRO POUŽITÍ A ÚDRŽBU cs
HASZNÁLATI ÉS KARBANTARTÁSI KÉZIKÖNYV hu
PRIROČNIK Z NAVODILI ZA UPORABO IN VZDRŽEVANJE sl
KNJIŽICA O UPORABI I ODRŽAVANJU hr
NAUDOJIMO IR PRIEŽIŪROS KNYGELĖ lt
LIETOŠANAS UN TEHNISKĀS APKOPES GRĀMATIŅA lv
KASUTUS- JA HOOLDUSJUHEND et
LIVRET DE UTILIZARE ŞI ÎNTREŢINERE ro
PRÍRUČKA PRE POUŽITIE A ÚDRŽBU sk
НАРЪЧНИК ЗА ИЗПОЛЗВАНЕ И ПОДДРЪЖКА bg
КЕРІВНИЦТВО З ЕКСПЛУАТАЦІЇ Й ТЕХНІЧНОГО ОБСЛУГОВУВАННЯ uk
使用和维护手册 zh
Dantherm Sp. z o.o.
ul. Magazynowa 5A,
62-023 Gądki, Poland
o󰘲[email protected]
Dantherm Sp. z o.o.
ул. Магазинова, 5A,
62-023 Гадки, Польша
o󰘲[email protected]

ТЕХНИЧЕСКИ ДАНИ - TECHNICKÉ ÚDAJE - TECHNISCHE DATEN - TEKNISK DATA -
TEHNILISED ANDMED - ESPECIFICACIONES TÉCNICAS - TEKNISET TIEDOT -
DONNÉES TECHNIQUES - TECHNICAL DATA - TEHNIČKI PODACI - MŐSZAKI ADATOK -
DATI TECNICI - TECHNINIAI DUOMENYS - TEHNISKIE DATI - TECHNISCHE GEGEVENS -
TEKNISKE DATA - DANE TECHNICZNE - DADOS TÉCNICOS - DADOS TÉCNICOS - INFORMAłII
TEHNICE - ТЕХНИЧЕСКИЕ ДАННЫЕ - TEKNISKA DATA - TEHNIČNI PODATKI -
TECHNICKÉ PARAMETRE - ТЕХНІЧНІ ДАНІ - 技术参数
MODEL DH 716 DH 720
~220V-240V-B / 50Hz - Гц 260W - Вт ~220V-240V-B / 50Hz - Гц 390W - Вт
16 l/day - л / 24ч 20 l/day - л / 24ч
Rotary Rotary
R134a 0,15kg - кг R134a 0,14kg - кг
5 ~ 32oC5 ~ 32oC
35 ~ 95% 35 ~ 95%
5 L - л 5 L - л
336 x 210 x 547 mm - мм 336 x 210 x 569 mm - мм
10,4 kg - кг 11 kg - кг
CO2Eq 0,2145 0,2002
GWP 1730 1730
Power supply
Power /Ampere consumption *
Moisture removal capacity
Compressor
Refrigerant
Working range
Water tank capacity
Size (WxDxH)
N.W.
230 V
HFC
H2O
WL
H
RT 30ºC
RH 80%
( )
Power supply
Power /Ampere consumption *
Moisture removal capacity
Compressor
Refrigerant
Working range
Water tank capacity
Size (WxDxH)
N.W.
230 V
HFC
H2O
WL
H
RT 30ºC
RH 80%
( )
Power supply
Power /Ampere consumption *
Moisture removal capacity
Compressor
Refrigerant
Working range
Water tank capacity
Size (WxDxH)
N.W.
230 V
HFC
H
2
O
WL
H
RT 30ºC
RH 80%
( )
Power supply
Power /Ampere consumption *
Moisture removal capacity
Compressor
Refrigerant
Working range
Water tank capacity
Size (WxDxH)
N.W.
230 V
HFC
H
2
O
WL
H
RT 30ºC
RH 80%
( )
Power supply
Power /Ampere consumption *
Moisture removal capacity
Compressor
Refrigerant
Working range
Water tank capacity
Size (WxDxH)
N.W.
230 V
HFC
H
2
O
WL
H
RT 30ºC
RH 80%
( )
Power supply
Power /Ampere consumption *
Moisture removal capacity
Compressor
Refrigerant
Working range
Water tank capacity
Size (WxDxH)
N.W.
230 V
HFC
H
2
O
WL
H
RT 30ºC
RH 80%
( )
Power supply
Power /Ampere consumption *
Moisture removal capacity
Compressor
Refrigerant
Working range
Water tank capacity
Size (WxDxH)
N.W.
230 V
HFC
H
2
O
WL
H
RT 30ºC
RH 80%
( )
Power supply
Power /Ampere consumption *
Moisture removal capacity
Compressor
Refrigerant
Working range
Water tank capacity
Size (WxDxH)
N.W.
230 V
HFC
H2O
W
L
H
RT 30ºC
RH 80%
( )
Power supply
Power /Ampere consumption *
Moisture removal capacity
Compressor
Refrigerant
Working range
Water tank capacity
Size (WxDxH)
N.W.
230 V
HFC
H
2
O
WL
H
RT 30ºC
RH 80%
( )

Fig. 6Fig. 5
Fig. 1 Fig. 2
Fig. 3Fig. 4

Fig. 7

en
CZ
DE
DK
EE
ES
FI
FR
GB
HR
HU
IT
LT
LV
NL
NO
PL
RO
RU
SE
SI
SK
UA
SE
SI
SK
TR
UA
PLEASE TAKE TIME TO READ THIS MANUAL
CAREFULLY BEFORE USE AND SAVE IT FOR
FUTURE REFERENCE.
THE UNIT IS SEALED AND CONTAINS FLUO-
RINATED GREENHOUSE GASES COVERED
BY KYOTO PROTOCOL.
THE “GWP” IS LISTED IN THE “TECHNICAL
SPECIFICATIONS TABLE”.
►1. HOW IT WORKS
This product is a dehumidier. It controls relative humidi-
ty by passing the air through the unit, forcing the excess
moisture to condensate over the cooling elements. Contact
with this cold surface causes the moisture in the air to con-
dense. This condensed water then drains safely into the
water tank. The dried air then passes through the conden-
ser where it is slightly warmed and re-enters the room at a
slightly elevated temperature.
► FIG. 1
1. Dry warmer air
2. Condenser (warmed coil)
3. Evaporator (cold refrigerated coil)
4. Moist saturated air
5. Water tank
6. Compressor
7. Motor
8. Fan rotor
►2. WHERE TO POSITION
Excess moisture will travel throughout your home, in the
same way that cooking smells waft to every room in the
house. For this reason, the dehumidier should be posi-
tioned, so that it can draw this moist air towards it from all
over the home.
Alternatively, if you have a serious problem in one area you
can begin by positioning the dehumidier close to this area
and later moving it to a more central point.
When positioning the dehumidier, ensure that it is placed
on a level surface and that there is a minimum of 10 cm
(4”) of space on either side of the unit to allow for efcient
airow.
This dehumidier is tted with castors for extra mobility, if
you move the unit, it should rst be switched off and the
water tank emptied.
We do not recommend the use of an extension lead, so
please try to ensure that the unit is sufciently close to a
xed mains socket. If it is necessary to use am extension
lead, please ensure the diameter of the wires of the cable
is at least 1 mm2.
When the dehumidier is in operation, outside doors and
windows should be closed when necessary for most ef-
cient use .
►3. BEFORE USE
CAUTION!
► Always keep the unit in vertical position.
► Leave the unit to stand for one hour before connecting
to the mains supply after transport or when it has been
tilted (e.g. during cleaning).
► Keep all foreign objects away from the air intake or out-
put openings.
► The mains supply must conform to the specication
shown on the rating plate at the back of the unit.
► If the supply cord is damaged, it must be replaced by
an approved service representative or a similar qualied
person in order to avoid a hazard.
► Never use the plug to start and stop the unit. Always
use switch on the control panel.
► Before moving the unit, rst switch off, then unplug and
empty the water tank.
► Don’t use bug sprays or other ammable cleaners on
the unit.
► Never pour or spray water over the unit.
► THIS APPLIANCE IS NOT INTENDED FOR USE BY
PERSONS (INCLUDING CHILDREN) WITH REDUCED
PHYSICAL , SENSORY OR MENTAL CAPABILITIES, OR
LACK OF EXPERIENCE AND KNOWLEDGE , UNLESS
THEY HAVE BEEN GIVEN SUPERVISION OR INSTRUC-
TION CONCERNING USE OF THE APPLIANCE BY A
PERSON RESPONSIBLE FOR THEIR SAFETY. CHILD-
REN SHOULD BE SUPERVISED TO ENSURE THAT
THEY DO NOT PLAY WITH APPLIANCE.
IMPORTANT!
Do not use this unit at ambient temperatures below 5OC, to
prevent the possibility of a heavily ice up evaporating coil.
►4. PARTS
► Front FIG. 2
1. Control panel
2. Ambient light
3. Front plate
4. Rear plate
► Rear FIG. 3
5. Wind ap
6. Handle
CONTENTS
1... HOW IT WORKS
2... WHERE TO POSITION
3... BEFORE USE
4... PARTS
5... OPERATION
6... DRAINAGE
7... MAINTENANCE
8... TROUBLE SHOOTING

en
CZ
DE
DK
EE
ES
FI
FR
GB
HR
HU
IT
LT
LV
NL
NO
PL
RO
RU
SE
SI
SK
UA
SE
SI
SK
TR
UA
7. Air inlet / Filters
8. Water level window
9. Water tank
►5. OPERATION
► Control panel FIG. 4
1. Humidity setting button
2. Working mode indicator (continuous working, humidity
40%, 50%, 60%, 70%)
3. Humidity/Temperature display
4. Timer operation indicator
5. Temperature display button
6. Ionizer or TiO2 indicator (these are optional function de-
pending on the model you purchased)
7. DRYER indicator
8. DRYER button
9. High ventilation indicator
10. Speed/Ventilation button
11. Low ventilation indicator
12. Power indicator
13. ON/OFF (power) button
14. “Full Water” indicator
15. TIMER button
16. Ionizer or TiO2 button (these are optional function de-
pending on the model you purchased)
► Ambient light features
Blue light – room humidity > 70%
Green light – room humidity 50~70%
Red light –room humidity < 50%
Red light ash – water full alarm
Operation
1. Plug the unit into a correct mains socket. (Please refer
to the rating label at the rear of the unit for correct vol-
tage/frequency.)
2. Press ON/OFF button to turn on the unit. The compres-
sor will start to work.
3. Press humidity setting button to set the working model
you need: continuous working, humidity 40%, 50%,
60% or 70%. The relative indicator will light on.
4. Press speed/ventilation button to set the ventilation
speed, high or low. The relative indicator will light on.
5. Press the TIMER button to set the operating hour you
need (1~24 hours). The display window will show the
hour(s) you set as you press the TIMER button, after
releasing it for 8 seconds around, the display window
will return to the room humidity. As the set time has
been reached, the compressor will stop working auto-
matically.
6. By pressing the ”TEMP” button, the display window will
show the room temperature, after releasing the button
for 8 seconds around, the display window will return to
the room humidity.
7. DRYER function is turbo ventilation to dry the moistu-
re in the air continuously, so it could help to dry the
laundry.
8. To turn off the unit, press ON/OFF button again.
9. Pre-setting function By pressing TIMER button but wit-
hout turning on the other functions (including ON/OFF
button), you can PRE-SET the time for the machine to
work. For example, if you press the timer to ’2’, the unit
will work automatically after 2 hours
►6. DRAINAGE
While the water tank is full, the compressor will stop for
self-protection and the water full indicator will turn into red.
To move the water tank, pull it out squarely from the unit.
After empting the water tank, place the water tank into spa-
ce. Make sure it is properly positioned, in order for the ’wa-
ter full’ sign to go out and your dehumidier is operating.
Please note, in case, the water tank has not been positio-
ned well, the water full indicator will turn into red.
►CONTINUOUS DRAINAGE
When the dehumidier is operated at very high humidity
levels, the water tank will require more frequent drainage.
In this situation, it may be more convenient to set the unit
up for continuous drainage with the following procedures:
1. Pull out the water tank (FIG. 5).
2. Connect the drain hole with water tube of inner diame-
ter: 11 mm. The water tube is not supplied with the unit
(FIG. 6).
3. Ensure the water will always drain away freely and the
tube will remain in right place. Note! In very cold weather
conditions, precautions should be taken to prevent the wa-
ter tube from freezing.
4. Put the water tank back to its position.
►7. MAINTENANCE
Always unplug the unit from the mains before carrying out
any maintenance or cleaning of the unit.
CLEANING THE BODY
Use soft cloth to wipe the unit clean.
Don’t ever use volatile chemicals, gasoline, detergents,
chemically treated clothes, or other cleansing solutions.
These all could possibly hurt the cabinet.
CLEANING THE FILTER
This dehumidier is equipped with 2 lters (FIG. 7):
1. ANTI-DUST FILTER
Extract the lter holder, remove the active carbon lter.
Use a vacuum cleaner or tap the lter lightly for easy clea-
ning. If the lter is particularly dirty, use warm water with
a small amount of a small amount of medium strength
detergent.
Make sure the lter is completely dry before replacing.
Do not expose the lter to sunlight.
2. ACTIVE CARBON FITLER (for capturing the particles
of dust suspended in the air and preventing the produc-
tion of bacteria.)
The active carbon lter placed under the anti-dust lter is
not washable. Its life span is variable and depends on the
ambient conditions where the unit is used. The lter should
be checked periodically and replaced if necessary.
STORAGE
If not use the unit for an extended period of time. Please:
Turing the unit off, unplug and tidy AC cord.
► Completely empty the water tank and wipe it clean.
► Cover the unit and store where it will not receive direct
sunlight.
►8. TROUBLE SHOOTING
THE UNIT DOES NOT OPERATE:
► Is the unit plugged in?

en
CZ
DE
DK
EE
ES
FI
FR
GB
HR
HU
IT
LT
LV
NL
NO
PL
RO
RU
SE
SI
SK
UA
SE
SI
SK
TR
UA
► Is the house electricity on?
► Is the room temperature below 5OC or above 35OC? If
so, then it is out of the working range of the unit.
► Ensure the humidistat (or ON/OFF switch) is turned
on.
► Check the water tank is positioned properly in the unit
and it is not full.
► Make sure the air inlet and outlet are not obstructed.
THE UNIT SEEMS TO DO NOTHING:
► Is the lter dusty, contaminated ?
► Is the air intake or outlet blocked up?
► Is the room humidity already quite low?
THE UNIT SEEMS TO DO LITTLE:
► Are too many windows or doors open?
► Is there something in the room producing lots of humi-
dity?
THE UNIT IS TOO NOISY:
► Check whether the unit is sitting on a level surface.
THE UNIT IS LEAKING:
► Make sure the unit is in good shape.
► If you are not using continuous drainage, make sure the
rubber plug (at the bottom of the unit) is in its position.
Error codes on display
Code Cause Solution
E1 The room tempera-
ture sensor (with re-
sin head) is open or
short circuit fault
Checking if the room
temperature sensor
is plugged in properly
on the PCB.
Replace the room
temperature sensor
of room temp.
Replace main PC
board.
The humidity level is
below RH40%
E2 The system sensor
(with copper head) is
open or short circuit
fault
Checking if the sys-
tem sensor is plug-
ged in properly on
the PCB.
Replace the system
sensor
Replace main PC
board.

CE CONFORMITY CERTIFICATE - DICHIARAZIONE DI CONFORMITÀ CE - EG-KONFOR-
MITÄTSERKLÄRUNG - DECLARACIÓN DE CONFORMIDAD CE - DECLARATION DE CON-
FORMITE CE - EG-CONFORMITEITVERKLARING - DECLARAÇÃO DE CONFORMIDADE CE
- EU-OVERENSSTEMMELSESERKLÆRING - EY-VAATIMUSTENMUKAISUUSVAKUUTUS -
CE-SAMSVARSERKLÆRING - EG-FÖRSÄKRAN OM ÖVERENSSTÄMMELSE - DEKLARACJA
ZGODNOŚCI WE - ДЕКЛАРАЦИЯ О СООТВЕТСТВИИ СЕ - PROHLÁŠENÍ O SHODĚ CE - EK
MEGFELELŐSÉGI NYILATKOZAT - IZJAVA O SKLADNOSTI IN OZNAKA CE - CE UYGUNLUK
BEYANI - IZJAVA CE O SUKLADNOSTI - ES ATITIKTIES DEKLARACIJA - EK ATBILSTĪBAS
- DEKLARĀCIJA - EÜ VASTAVUSDEKLARATSIOON - DECLARAŢIE DE CONFORMITATE
CE - PREHLÁSENIE O ZHODE CE - ДЕКЛАРАЦИЯ ЗА СЪВМЕСТИМОСТ СЕ - ДЕКЛАРАЦІЯ
ВІДПОВІДНОСТІ CE - IZJAVA CE O PRIKLADNOSTI ΔΗΛΩΣΗ ΣΥΜΜΟΡΦΩΣΗΣ CE - CE 符合
性声明
Dantherm Sp. z o.o. - ul. Magazynowa 5A, 62-023 Gądki, Poland
Product: - Prodotto: - Produkt: - Producto: - Produit: - Product: - Produto: - Produkt: - Tuote: - Produkt: - Produkt: - Pro-
dukt: - Изделие: - Výrobek: - Termék: - Izdelek: - Ürün: - Proizvod: - Gaminys: - Ierīce: - Toode: - Produsul: - Výrobok:
- Продукт: - Виріб: - Proizvod: - Προϊόν: - 产品:
DH 716 - DH 720
We declare that it is compliant with: - Si dichiara che è conforme a: - Es wird als konform mit den folgenden Normen
erklärt: - Se declara que está en conformidad con: - Nous déclarons sa conformité à: - Hierbij wordt verklaard dat het
product conform is met: - Declara-se que está em conformidade com: - Vi erklærer at produktet er i overensstemmel-
se med: - Vakuutetaan olevan yhdenmukainen: - Man erklærer at apparatet er i overensstemmelse med: - Härmed
intygas det att produkten är förenlig med följande: - Oświadcza się, że jest zgodny z: - Заявляем о соответствии
требованиям: - Prohlašuje se, že je v souladu s: - Kijelentjük, hogy a termék megfelel az alábbiaknak: - Izpolnjuje
zahteve: - Aşağıdaki standartlara uygun olduğunu beyan ederiz: - Izjavljuje se da je u skladu s: - Pareiškiame, kad
atitinka: - Tiek deklarēts, ka atbilst: - Käesolevaga deklareeritakse, et toode vastab: - Declarăm că este conform
următoarelor: - Prehlasuje sa, že je v súlade s: - Декларира се че отговаря на: - Відповідає вимогам: - Izjavljuje se
da je u skladu s: - Δηλώνουμε ότι είναι σύμφωνο με: - 兹证明符合:
2014/30/EU, 2014/35/EU, 2011/65/EU
EN 60335-1:2012+A11:2014+AC:2014,
EN60335-2-40:2003+A11:2004+A12:2005+A1:2006+A2:2009+A13:2012+
AC:2013, EN 55014-1:2006+A1:2009+A2:2011, EN 55014-2:2015,
EN 61000-3-2:2014, EN 61000-3-3:2013, EN 62233:2008+AC:2008
Gądki, 01/06/2017
Stefano Verani (Member of the Board)

►en - DISPOSAL OF THE PRODUCT
-This product has been designed and manufactured with top-quality materials and components, which can be re-cycled and re-
used.
-When a crossed-wheely bin symbol is attached to the product, it means that the product is protected by the, 2012/19/UE European
Directive.
-Please obtain information regarding the local di󰘯erentiated collection system for electrical and electronic products.
-Respect local Standards in force and do not dispose of old products as normal domestic waste. Correct disposal of the product
helps to prevent possible negative consequences for health, the environment and mankind.
►it - SMALTIMENTO DEL PRODOTTO
-Questo prodotto è stato progettato e fabbricato con materiali e componenti di alta qualità, che possono essere riciclati e riutilizzati.
-Quando ad un prodotto è attaccato il simbolo del bidone con le ruote segnato da una croce, signi󰘰ca che il prodotto è tutelato
dalla Direttiva Europea 2012/19/UE.
-Si prega di informarsi in merito al sistema locale di raccolta di󰘯erenziata per i prodotti elettrici ed elettronici.
-Rispettare le norme locali in vigore e non smaltire i prodotti vecchi nei normali ri󰘰uti domestici. Il corretto smaltimento del prodotto
aiuta ad evitare possibili conseguenze negative per la salute dell’ambiente e dell’uomo.
►de - ENTSORGUNG DES PRODUKTS
-Dieses Produkt wurde unter Verwendung von Qualitätsmaterialien und -bauteilen entwickelt und hergestellt, die recycelt und
wieder verwendet werden können.
-Ist ein Produkt gekennzeichnet durch die Mülltonne mit Rädern und einem Kreuz, wird hier angezeigt, dass dieses Produkt durch
die europäische Direktive 2012/19/UE überwacht ist.
-Es wird gebeten, sich über die vor Ort bestehende Mülltrennung bezüglich elektrischer und elektronischer Produkte zu informieren.
-Die vor Ort geltenden Vorschriften zur Müllentsorgung müssen eingehalten werden und alte Produkte dürfen nicht zusammen mit
dem Hausmüll entsorgt werden. Die ordnungsgemäße Entsorgung des Produkts hilft mögliche negative Folgen für Gesundheit
und Umwelt zu vermeiden.
►es - ELIMINACIÓN DEL PRODUCTO
-Este producto ha sido diseñado y fabricado con materiales y componentes de alta calidad que se pueden reciclar y reutilizar.
-Cuando en el producto se encuentra el símbolo del contenedor con las ruedas tachado con una cruz, signi󰘰ca que el producto
está tutelado por la Directiva europea 2012/19/UE.
-Se ruega informarse acerca del sistema local de recogida selectiva para los productos eléctricos y electrónicos.
-Respete las normas locales vigentes y no elimine los productos viejos junto con los residuos domésticos normales. La eliminación
correcta del producto ayuda a evitar posibles consecuencias negativas para la salud del ambiente y del hombre.
►fr - SE DÉBARRASSER DE VOTRE PRODUIT USAGÉ
-Ce produit a été conçu et fabriqué avec des matériaux et des composants de haute qualité, qui peuvent être recyclés et utilisés
de nouveau.
Lorsque le symbole d’une poubelle à roue barrée est appliqué à un produit, cela signi󰘰e que le produit est couvert par la Directive
Européenne 2012/19/UE.
Veuillez vous informer du système local de séparation des déchets électriques et électroniques.
Veuillez agir selon les règles locale set ne pas jeter vos produits usagés avec les déchets domestiques usuels. Jeter correctement
votre produit usagé aidera à prévenir les conséquences négatives potentielles contre l’environnement et la santé humaine.
►nl - VERWIJDERING VAN HET PRODUCT
-Dit product werd ontworpen en gemaakt met hoogwaardige materialen en componenten, die gerecycleerd en herbruikt kunnen
worden.
-Wanneer op een product het symbool van de afvalbak op wielen met een kruis erdoor is aangebracht, betekent dit dat het product
valt onder de Europese Richtlijn 2012/19/UE.
-Gelieve inlichtingen in te winnen betre󰘯ende het plaatselijke systeem voor gedi󰘯erentieerde inzameling van elektrische en
elektronische toestellen.
-Respecteer de plaatselijke normen die van kracht zijn, en verwijder de oude toestellen niet als gewoon huishoudelijk afval.
Een correcte verwijdering van het product helpt om mogelijke negatieve gevolgen voor de gezondheid van mens en milieu te
voorkomen.
►pt - ELIMINAÇÃO DO PRODUTO
-Este produto foi projetado e fabricado com materiais e componentes de alta qualidade que podem ser reciclados e reutilizados.
-Quando for a󰘰xado em um produto o símbolo do bidão com rodas marcado com uma cruz, signi󰘰ca que o produto é protegido
pela Diretiva Europeia 2012/19/UE.
-Solicitamos informar-se sobre o sistema local de recolha diferenciada para os produtos elétricos e eletrónicos.
-Respeitar as normas locais em vigor e não eliminar os produtos antigos como normais detritos domésticos. A correta eliminação
do produto ajuda a evitar possíveis consequências negativas para a saúde do ambiente e do homem.