Matatakitoyo Torque Tools ATP User manual

Insert square drive securely to the fitting or socket.
Push Button
Do not continuously apply force after
hearing the clicking sound or feel shock.
STOP
CLICK
Main Scale Graduation Scale
Hand ForceGripTube
Lock Ring
1. Study this instruction before use.
2.
This torque wrench is calibrated and tested before leaving the factory, it is certified to meet the current standard specification and has
an accuracy of ±4%.
3. THIS TOOL IS A PRECISION MEASUREMENT AND DESIGNED FOR MANUAL TIGHTENING FASTERNERS ONLY.
DO NOT USE IT AS A NUT BREAKER OR FOR ANY OTHER PURPOSE.
4. Do not over torquing the fastener, or it will cause tool’s damage and serious injury.
5. Do not use this tool near rotating machinery.
6. Disassemble this tool or make any adjustments will result in the loss of accuracy and invalidating the warranty.
7. Do not continuously apply force after hearing the clicking sound or feel shock.
8. Do not use any kind of extension on the handle of the tool. This will not only damage the tool, also affect the accuracy.
9. Do not immerse grease inside ratchet head. It may cause unexpected damage.
10. Use special care at minimum torque setting.
11. Please wear gloves and goggles when working.
BEFORE STARTING
HOW TO USE CONTENTS
9X12 14X18
TORQUE
Fitting (Not included) Choose a qualified Fitting or socket.
ManualSupplied in a plastic box.
Torque wrench
Push
Fitting
Manual
WARNING
0 mm
10
20
30
ATP
OPERATION MANUAL
Interchangeable Head
Adjustable Torque Handle
Models covered

Jan. 2023
02
Version
WH
L
ØD
N-m
9x12
9x12
14x18
9x12
14x18
14x18
ATP-30N
ATP-80N
ATP-80NS
ATP-110N
ATP-110NS
ATP-210N
0.2 Nm
0.5 Nm
0.5 Nm
0.5 Nm
0.5 Nm
1 Nm
6-30 Nm
10-80 Nm
10-80 Nm
20-110 Nm
20-110 Nm
40-210 Nm
ØD
39.1
35.0
35.0
35.0
39.1
39.1
L
280
355
365
355
360
505
H
17.2
19.0
25.1
19.0
22.0
24.7
W
24.3
24.0
32.0
24.0
32.0
32.0
39.1
35.0
35.0
35.0
39.1
39.1
280
355
365
355
360
505
17.2
19.0
25.1
19.0
22.0
24.7
24.3
24.0
32.0
24.0
32.0
32.0
0.75
0.88
0.90
0.94
0.96
1.50
KG ITEM NO. Range
9x12
9x12
14x18
9x12
14x18
14x18
ATP-250i
ATP-60F
ATP-60FS
ATP-80F
ATP-80FS
ATP-150F
1 in.lb
0.5 ft.lb
0.5 ft.lb
0.5 ft.lb
0.5 ft.lb
1 ft.lb
40-250 in.lb
10-60 ft.lb
10-60 ft.lb
15-80 ft.lb
15-80 ft.lb
30-150 ft.lb
ØDLHW
0.75
0.88
0.90
0.94
0.96
1.50
KG
Unit : mm
Accuracy : ± 4%
Metric SAE
ITEM NO. Range
1 Years
5000 Times
BHOW TO SET TORQUE VALUE
MAINTENCE AND STORAGE
For example : ITEM NO. ATP-210N
To set torque to 135 Nm. Firstly push down and hold the lock ring and
turn the handle clockwise until the upper edge to 130 Nm (see A) and the
reading “5” on the long tube must align with the center link of scale
perpendicularly so as to acquire 130+5=135 Nm. (see B)
0
28
210
170
130
90
50
190
150
110
70
200
160
120
80
40
180
140
100
60
N-M
0
28
N-M
210
170
130
190
150
200
160
120
180
140
64
N-M
210
170
130
190
150
200
160
120
180
140
A B
C
1. Pull down the lock ring to unlocked.
2. Turn the adjustable handle Clockwise or
Anti-clockwise (Right or left) to set the desired torque.
3. Push up the lock ring to set finished.
Unlock
Lock
Set
0
28
210
170
130
90
50
190
150
110
70
200
160
120
80
40
180
140
100
60
0
28
210
170
130
90
50
190
150
110
70
200
160
120
80
40
180
140
100
60
1 2 3
0
28
210
170
130
190
150
110
200
160
120
180
140
100
SPECIFICATION
TORQUE CONVERSION FACTORS
1. Please return torque value to just below lowest reading when not in use. Do not turn below lowest reading. (see C)
2. If this tool has not been used for a period of time, it shall be preloaded several times at its maximum torque setting.
This will allow internal lubricant to recoat.
3. Clean this tool by wiping with a clean cloth after operation and storage in a dry environment.
Do not dip any type of liquid in this tool. This may damage the internal of this tool.
4. This tool should be recalibrated a period of 12 months, or 5,000 cycles, whichever occurs first.
To contact with local vendor or an authorized repair center for supporting.
Units to be
converted
1 mN.m
1 cN.m
1 N.m
1 ozf.in
1 lbf.in
1 lbf.ft
1 gf.cm
1 kgf.cm(kp.cm)
1 kgf.m(kp.m)
1
10
1000
7.062
113
1356
0.098
98.07
9807
0.1
1
100
0.706
11.3
135.6
0.01
9.807
980.7
0.001
0.01
1
0.007
0.113
1.356
0.0001
0.098
9.807
0.142
1.416
141.6
1
16
192
0.014
13.89
1389
0.009
0.088
8.851
0.0625
1
12
0.0009
0.868
86.8
0.0007
0.007
0.738
0.005
0.083
1
0.00007
0.072
7.233
10.2
102
10197
72
1152.1
13826
1
1000
100000
0.01
0.102
10.2
0.072
1.152
13.83
0.001
1
100
0.0001
0.001
0.102
0.0007
0.0115
0.138
0.00001
0.01
1
=mN.m =cN.m =N.m =ozf.in =lbf.in =lbf.ft =gf.cm =kgf.cm
(kp.cm)
=kgf.m
(kp.m)
Corresponding unit
Conversion-formula :
Units to be converted × Factor = Corresponding unit
Example : Convert 5 lbf.ft into cN.m
Solution : 5 × 135.6 = 678 cN.m
E-mail:[email protected]om
www.matatakitoyo.com Made in Taiwan
MATATAKITOYO TOOL CO., LTD.
No. 63, Ln. 493, Sec. 3, Zhongshan Rd., Tanzi Dist.,
Taichung City 42754, Taiwan
TEL : [phone]
Manufacturer