Matatakitoyo Torque Tools MT2-1500N User manual

BEFORE STARTING CONTENTS
1. Select a quality torque wrench
2. Get a torque multiplier
3. Choose quality socket
4. Prepare reaction plate
1. Choose the correct size of socket for bolt to be fastened with the multiplier.
2. Fix the reaction plate with the multiplier and next to the reaction point.
3. Put the torque wrench on the multiplier.
Remark：The input torque value is calculated by the physical formula,
Required Torque / Torque Ratio = Input Torque
For example：1,200 Nm / 10 = 120 Nm, 120 Nm is the input torque
4. Apply the torque wrench gently and evenly until hear the
click sound and feel light shock.
PART NAME
1 Body
2 Reaction Plate
3 Input Drive
4 Output Drive
5 Screw
1
3
4
2
1/2” 3/4”
1. Study this instruction before use.
2. This tool is with torque ratio and there is an amount of reaction to be made to the fasteners.
Please keep hands or face away from reaction plate. The reaction force might result injury.
3. THIS TOOL IS DESIGNED FOR MANUAL TIGHTENING FASTENERS ONLY.
DO NOT USE ANY IMPACT TOOL TO OPERATE.
4. Over torque will cause tool damage and personal injury.
5. Do not use this tool near rotating machinery.
6. Any adjustments will result of losing accuracy and void the warranty.
7. Do not use any format of extension on the handle of the tool.
This will not only damage the tool, also affect the accuracy.
8. Please wear gloves and goggles when working.
Manual
Supplied in a plastic box.
HOW TO USE
BEFORE STARTING
STOP
CLICK
5
FORCE
INPUT DRIVE
REACTION
Manual
CAUTIONS
OPERATION MANUAL
Torque Multiplier
MT2-1500N
Multiplier
Models covered

E-mail:[email protected]om
www.matatakitoyo.com Made in Taiwan
MATATAKITOYO TOOL CO., LTD.
No. 63, Ln. 493, Sec. 3, Zhongshan Rd., Tanzi Dist.,
Taichung City 42754, Taiwan
TEL : [phone]
Manufacturer
Unit : mm
Accuracy : ± 6%
ITEM NO. Torque Ratio
3.41:10MT2-1500N 751/2"150 Nm 110 ft.lb 1500 Nm 1100 ft.lb
W
236.8
H
199.3
H1
192.5
L
Input
Square
3/4"
Output
Square
Range ( max )
Input Output
KG
SPECIFICATION MAINTENCE AND STORAGE
FINISHING WORKING
1. Load the torque wrench.
2. Move the ratchet direction to anti-clockwise and rotate slowly until the reaction is all released.
3. If remove failed, please re-set the ratchet direction to clockwise and engage the torque wrench again.
Then go back to step 2 until the reaction is all released.
To rotate slowly until the multiplier be released
Clean this tool by wiping with a clean cloth after operation
and storage in a dry environment. Do not dip any type of
liquid in this tool. This may damage the internal of this tool.
W
L
H
H1
Input
Output
Apr. 2020
02
Edition