Matatakitoyo Torque Tools MT2-1500N User manual

OPERATION MANUAL
Torque Multiplier
MT2-1500N
Models covered
BEFORE STARTING
1 Body
2 Reaction plate
3 Input drive
4 Output drive
5 Screw
1
34
2
1. Study this instruction before use.
2. This tool is with torque ratio and there is an amount of reaction to be made to the fasteners.
Please keep hands or face away from reaction plate. The reaction force might result injury.
3. THIS TOOL IS DESIGNED FOR MANUAL TIGHTENING FASTENERS ONLY.
DO NOT USE ANY IMPACT TOOL TO OPERATE.
4. Do not over torquing the fastener, or it will cause tool’s damage and serious injury.
5. Do not use this tool near rotating machinery.
6. Any adjustments will result in the loss of accuracy and invalidating the warranty.
7. Do not use any kind of extension on the handle of the tool.
This will not only damage the tool, also affect the accuracy.
8. Please wear gloves and goggles when working.
Manual
Supplied in a plastic box.
PART NAMECONTENTS
5
Manual
CAUTIONS
Torque multiplier
1/2”
TORQUE
3/4”

E-mail:[email protected]om
www.matatakitoyo.com Made in Taiwan
MATATAKITOYO TOOL CO., LTD.
No. 63, Ln. 493, Sec. 3, Zhongshan Rd., Tanzi Dist.,
Taichung City 42754, Taiwan
TEL : [phone]
Manufacturer
Unit : mm
Accuracy : C.W.±6%
ITEM NO. Torque Ratio
3.41:10MT2-1500N 751/2"150 Nm 110 ft.lb 1500 Nm 1100 ft.lb
W
210
H
173
H1
192.5
L
Input
Drive Drive
3/4"
Output
Range ( max )
Input Output
KG
Jun. 2023
03
SPECIFICATION
FINISHING WORKING
MAINTENANCE AND STORAGE
1. Load the torque wrench.
2. Move the ratchet direction to counter-clockwise and rotate slowly until the reaction force is all released.
3. If remove failed, please re-set the ratchet direction to clockwise and engage the torque wrench again.
Then go back to step 2 until the reaction force is all released.
Rotate slowly until the multiplier is released.
Clean this tool by wiping with a clean cloth after operation and storage in a dry environment.
Do not dip any type of liquid in this tool. This may damage the internal of this tool.
1. Select a qualified torque wrench
2. Get a torque multiplier
3. Choose a qualified socket
4. Prepare reaction plate
1. Choose the qualified socket for bolt and fastened the bolt with the multiplier.
2. Fix the reaction plate with the multiplier on the reaction point.
3. Put the torque wrench on the multiplier.
Remark：The input torque value is calculated by the physical formula.
Required Torque / Torque Ratio = Input Torque.
For example：1,200 Nm / 10 = 120 Nm, 120 Nm is the input torque.
4. Apply the torque wrench gently and evenly until hear the
clicking sound and feel shock.
W
L
H
H1
Input drive
Output drive
HOW TO USE
STOP
CLICK
Force
Input drive
Reaction
Version