Matatakitoyo Torque Tools MT-1000 User manual

BEFORE STARTING
CONTENTS
HOW TO USE
1. Select a quality torque wrench
2. Get a torque multiplier
3. Choose quality socket
4. Prepare reaction arm/bar
Manual
1/2” 3/4” 1”
Pin
1. Choose the correct size of socket for bolt to be fastened with the multiplier.
2. Fix the extension bar / reaction foot with the multiplier and next to the
reaction point.
3. Put the torque wrench on the multiplier.
Remark：The input torque value is calculated by the physical formula,
Required Torque / Torque Ratio = Input Torque
For example：480 Nm / 3 = 160 Nm, 160 Nm is the input torque
4. Apply the torque wrench gently and evenly until hear the click sound
and feel light shock.
MT
OPERATION MANUAL
Torque Multiplier
Models covered
1. Study this instruction before use.
2. This tool is with torque ratio and there is an amount of reaction to be made to the fasteners.
Please keep hands or face away from extension bar / reaction foot. the reaction force might result injury.
3. THIS TOOL IS DESIGNED FOR MANUAL TIGHTENING FASTENERS ONLY.
DO NOT USE ANY IMPACT TOOL TO OPERATE
4. Over torque will cause tool damage and personal injury.
5. Do not use this tool near rotating machinery.
6. Any adjustments will result of losing accuracy and void the warranty.
7. Do not use any format of extension on the handle of the tool.
This will not only damage the tool, also affect the accuracy.
8. Please wear gloves and goggles when working.
Manual
CAUTIONS
FORCE
REACTIONREACTION
Supplied in a plastic box.
Multiplier
INPUT DRIVE
INPUT DRIVE
STOP
CLICK

E-mail:[email protected]om
www.matatakitoyo.com Made in Taiwan
MATATAKITOYO TOOL CO., LTD.
No. 63, Ln. 493, Sec. 3, Zhongshan Rd., Tanzi Dist.,
Taichung City 42754, Taiwan
TEL : [phone]
Manufacturer
SPECIFICATION
TEAR DOWN MAINTENANCE
FINISHING WORKING
To rotate slowly until the
multiplier be released.
1 Body
2 Extension Bar
3 Reaction Foot
4 Input Drive
5 Output Drive
6 Screw
Apr. 2020
02
Edition
3.09
6.49
MT-1000
MT-2000
73.8
92.2
1/2”
3/4”
500 Nm
1000 Nm
1:3
1:3
365 ft.lb
730 ft.lb
1500 Nm
3000 Nm
1100 ft.lb
2200 ft.lb
W
85.0
105.8
H1
88.0
120.8
H
420
501
L
3/4”
1”
KG
1. Load the torque wrench.
2. Move the ratchet direction to anti-clockwise and rotate slowly until the reaction is all released.
3. If remove failed, please re-set the ratchet direction to clockwise and engage the torque wrench again.
Then go back to step 2 until the reaction is all released.
Clean this tool by wiping with a clean cloth after operation
and storage in a dry environment. Do not dip any type of
liquid in this tool. This may damage the internal of this tool.
Unit : mmAccuracy : ± 6%
ITEM NO.
Torque Ratio
Range ( max )
Input Output
Input
Square
Output
Square
1
45
2
3
Apr. 2020
02
Edition
FORCE
FORCE
REACTION
REACTION
INPUT DRIVE
L
H
H1
W
Push
Pin
1. 2.
Pin
INPUT DRIVE
6
STOP
CLICK
STOP
CLICK