Protect the environment by not disposing of this product with household waste ( 2002/96/EC ).
Check your local authority for recycling advice and facilities.
Pb
In exceptional circumstances batteries may leak fluids that can cause a chemical burn injury or ruin your product.
To avoid battery leakage:
• Non-rechargeable batteries are not to be recharged.
• Rechargeable batteries are to be removed from the product before being charged.
• Rechargeable batteries are only to be charged under adult supervision.
• Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.
• Do not mix old and new batteries.
• Only batteries of the same or equivalent type as recommended are to be used.
• Batteries are to be inserted with the correct polarity.
• Exhausted batteries are to be removed from the product.
• The supply terminals are not to be short-circuited.
• Dispose of battery(ies) safely.
• Do not dispose of this product in a fire. The batteries inside may explode or leak.
BATTERY SAFETY INFORMATION
NOTE:
Changes or modifications not expressly approved by the manufacturer responsible
for compliance could void the user’s authority to operate the equipment.
THIS CLASS B DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003.
CET APPAREIL NUMÉRIQUE DE LA CLASSE B EST CONFORME À LA NORME NMB-003 DU CANADA.
(VALID FOR CANADA ONLY • VALABLE AU CANADA SEULEMENT)
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this
device must accept any interference, including interference that may cause undesired operation of the device.
L’utilisation de ce dispositif est autorisée seulement aux conditions suivantes :
(1) Il ne doit pas produire de
brouillage et (2) il doit pouvoir tolérer tout brouillage radioélectrique reçu,
même si ce brouillage est susceptible de
compromettre son fonctionnement.
For product sold in Canada • Pour les produits vendus au Canada
For product sold in USA
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
• This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
INSTRUCTIONS
BRAVE BUDDIES™
BUZZ LIGHTYEAR
®
BFP65-0920
3+
®
Mattel, Inc., 636 Girard Avenue, East Aurora, NY 14052, U.S.A. Consumer Relations 1-800-524-8697. Mattel U.K.
Ltd., Vanwall Business Park, Maidenhead SL6 4UB. Helpline 01628 500303. Mattel Australia Pty., Ltd., Richmond,
Victoria. 3121.Consumer Advisory Service - 1300 135 312. Mattel East Asia Ltd., Room 1106, South Tower, World
Finance Centre, Harbour City, Tsimshatsui, HK, China. Diimport & Diedarkan Oleh: Mattel SEA Ptd Ltd.(993532-P)
Lot 13.5, 13th Floor, Menara Lien Hoe, Persiaran Tropicana Golf Country Resort, 47410 PJ.
Tel:03-78803817, Fax:03-78803867.
©2013 Mattel. All Rights Reserved.
© Disney/Pixar
service.mattel.comVisit www.toystory.com
CONTENTSC
NT
1.CONTENTS
1.CONTENTS
2.BATTERY
INSTALLATION
2.BATTERY
INSTALLATION
Keep these instructions for future reference as they contain important information.
• Batteries included are for demonstration purposes only.
• Replace the batteries if sounds distort or lights dim. • Open the
fastener to reveal the battery compartment. • Pull the battery
compartment out. • Unscrew the battery cover with a Phillips
head screwdriver (not included). • Remove batteries and dispose
of them safely. • Install 3 new button cell (AG13, LR44) batteries
in the orientation (+/-) shown. • Replace battery cover and
tighten screw. • Push the battery compartment back in. • Close
the fastener to cover up the battery compartment. • For best
performance, use only alkaline batteries.• When exposed to an
electrostatic source, the product may malfunction. To resume
normal operation, remove and re-install the batteries.
2
1Press for phrases and sounds.Press for light-up laser.
3.TO PLAY
3.TO PLAY
2. 3.
INSTRUCTION SHEET
SPECIFICATIONS
Toy:
Toy No.:
Part No.:
Trim Size:
Folded Size:
Type of Fold:
# colors:
Colors:
Paper Stock:
Paper Weight:
EDM No.:
TS FEATURE PLUSH SPRING
BFP61_BFP65
0920
A4
One
Black
White Offset
70 lb.
4. 1.
Armor glows in the dark.
ab
c
Includes 3 AG13 (LR44) button cell batteries.
Dispose of batteries safely.
“Glow-in-the-dark feature will last
longer if you do not expose this product
to intense heat or direct sunlight for
prolonged periods of time.”
“Place gure approximately 5 feet (152
cm) away from a light source for 30
seconds. Placing gure closer will not
intensify the “glow-in-the-dark” feature”
