MediCrystal BIO-MAGNETIC AMETHYST TOURMALINE MIDSIZE... User manual

QUICKSTART GUIDE
All products, controllers, specications and data, and a set of items packaged in a box are subject to change without notice to improve the devices' reliability, function, or design.
Please, check for the details of the most updated products at the www.MediCrystal.com website.
EN
printed owner’s
guide
CARRY AND STORAGE
BAG for your mat
HIGH ABSORPTION BREATHABLE
WATERPROOF MULTILAYER
PROTECTION COVER TO KEEP
MAT CLEAN
and/or
3D AIR MESH PAD
TO CUSHION MAT AND
PROVIDE BODY SUPPORT
DISTRIBUTING STONES
PRESSURE
19
layers
EMF
FREE
HEATING
SYSTEM
10
Reveals crystals’ powers and
brings natural forces into your
home*
Provides a restful and calming
setting in the middle of
modern civilization*
Creates an energized
environment to feel inspired
and happy*
A great complement to
massage, yoga, and reiki*
It helps to balance chakras’
activity and clean energy
channels*
H-60VA
operational
CONTROLLER
with wires
Layer 11 – Thermostat sensors measure temperature in the dierent points of the
multilayer structure and report to the controller. This is the current mat’s temperature that
you can see on the controller display. The temperature sensors help to maintain consistent
heat levels throughout the mat as set by the user. They are also a part of the overheat
protection controller system.
Layer 12 – Bimetal switches for emergency overheat protection with automatic power
shut-o feature if the controller overheats protection system fails, and the mat heats up
to 80°C or 176°F.
13 Layer 13 – Cotton fabric laminated with red clay accumulating heat, discharging Negative
Ions, naturally releasing Far InfraRed rays.
14 Layer 14 – Charcoal fabric layer releasing Far InfraRed (FIR) Rays and Negative Ions,
decomposing and deodorizing smell.
15 Layer 15 – Pure aluminum foil FIR reection blocks heat from being conducted downwards
and assists other layers in distributing and continually releasing the heat evenly.
16 Layer 16 – Non-woven fabric layer for heat absorption and preservation.
Layer 17 – Magnetic Copper coils.
18 Layer 18 – Compressed non-woven cotton padding for thermal protection and increased
comfort.
19 Layer 19 – Waterproof eco-leather or polyester peach skin fabric for durability, tension
resistance, and protection from moisture, dirt, and wear.
1Layer 1 – High-quality heat-resistant reddish-brown eco-suede, elegant, so,
comfortable, durable, and easy to clean, featured with MediCrystal® Logo on the top.
2Layer 2 – Transparent lm with V-shape, which acts as a window to view Amethyst and
Tourmaline gemstones.
3Layer 3 – High Grade «A-AB» crushed to 2-10 mm and tumbled natural, not chemically
treated Purple Amethyst crystals and Black Tourmaline gems. Hot crystals release heating
Far InfraRed (FIR) rays and Negative Ions.*
4Layer 4 – Cotton layer with charcoal lamination for thermal preservation and even heat
distribution.
5Layer 5 – Non-woven functional fabric layer for increased release of Negative Ions.
6Layer 6 – Waterproof and thermal preservation complex aluminum lm to protect internal
mat sensors and heating systems from moisture and sweat.
7Layer 7 – Electronic-wave proof copper ber fabric EMI (Electro-Magnetic Interceptor)
layer for primary shielding user from any remaining electromagnetic elds (EMF).
8Layer 8 – Aluminum foil EMI layer blocking EMFs and uniformly distributing the heat to the
upper layer with gemstones.
9Layer 9 – Durable 0.2 mm non-woven glass ber fabric layer for heating wire xing and
protection.
10 Layer 10 – Unique silicon heating wires in Teon insulation twice shielded with copper
and foil to eliminate EMFs.
14 dierent magnetism
programs or manual frequency
choice between 1 and 30 Hz to
create a relaxation, energizing,
or harmonizing environment
1 or 2 valuable toppers permeable
for IONS, FIR RAYS, and MAGNETISM:
BIO-MAGNETIC AMETHYST TOURMALINE MIDSIZE V-MAT
MEDICRYSTAL® MIDSIZE MAT SET INCLUDES:
midsize
mat
SIZE: 59"x24" (150x60 cm)
HEATING AREA: 48"x23" (121x56 cm)
FIR HEAT ADJUSTABLE FROM 86°F TO 158°F
2BIMETAL SENSORS
2THERMOSTAT SENSORS
6COPPER COILS
10 lbs OF CRUSHED AMETHYST CRYSTALS
3.5 lbs OF CRUSHED TOURMALINE CRYSTALS
HEATING POWER: 220W
VOLTAGE: 110-120V, 60 Hz
TOTAL WEIGHT: 22 lbs
GROSS WEIGHT: 25 lbs
Mat electrical connector for controller plug.
A tight connection between the mat and
controller is essential to avoid errors and faults
1
2
34
5
6
7
8
9
10
13
14
15
16
18
19
Crystals are infused inside
the red-brown tubes
With a V-shape window showing a thick layer
of crushed Natural Purple Amethyst and Natural
Non-Ceramic Black Tourmaline lled inside
eco-suede wavy tubes across all the mat from
edge to edge
59"
24"
48"
23"
heating area
Natural Amethyst
Natural Black Tourmaline

QUICKSTART GUIDE
All products, controllers, specications and data, and a set of items packaged in a box are subject to change without notice to improve the devices' reliability, function, or design.
Please, check for the details of the most updated products at the www.MediCrystal.com website.
*MediCrystal® stone mattresses, mats, pads, belts, wraps, pillows can
help you create a relaxing, soothing, and re-energizing environment to
maintain your wellness, balance, sound sleeping, physical strength, and
tness and awaken the restfulness, comfort, and invigoration powers
and energies. Together with exercises and a healthy diet, MediCrystal®
products may supplement your daily activity and become an essential
part of your healthy lifestyle, improving your ability to do everyday
things and enhance your life experience. MediCrystal® products are not
intended to diagnose, cure, treat, mitigate, or prevent any disease,
illness, or medical condition or substitute medical treatment of any kind
or aect the body's structure or function. Information here is never to be
construed as medical advice. It does not reect or represent a product
claim. FDA has not approved or evaluated MediCrystal® products or this
information. All products, specications, and data are subject to change
without notice to improve the products' reliability, function, or design.
LEGAL DISCLAIMER
EN
1
3
5
2
4
6
8
9
710
11
Regular connector
for controller plug
In-line screw connector
between the mat and controller
OR
If your mat is rated for the North American 110-120V voltage and your controller is with the U.S. standard
NEMA 5-15P (two-pole with ground pin) plug, use it only with the step-down 220-250V to 110V voltage
converter in the 220-250V 50Hz countries. The maximum wattage of such converter should be at least
2-3 times higher than the mat’s power consumption. Do not connect the 110-120V mat into the 220-250V
outlet through an adapter. If you plug in a device that isn’t rated for the outlet’s voltage, it may be severely
damaged and cause re risks!
1Power ON/OFF Toggle Button – Push it to turn the mat ON/OFF. When you turn it ON, the display will show ON. It means that
the controller is ON and ready to choose the program. If the controller display shows -- it means that the power is connected,
but the Button has not been activated, and no functions can be operated. Press the power button again with some eort so that
display shows ON.
2POWER Indicator – Lights up when Power is ON.
3
Timer Control Toggle Button – Select one of 4 options shown on the Display : 1H, 4H, 8H, 0H for 1, 4, 8, 12 hours heating session
with auto shut-o when the time expires, or you can choose -H (NO HEATING MODE) for only Magnetic function without heating.
Press and hold for 5 seconds to turn OFF Auto-Protection Feature; the display will show S-. Press and hold again to
reactivate this feature; the display will show SA.
4«HEATING» Operation Indicator – ON when the mat is heating, OFF when the set temperature is reached.
5Temperature, Timer, Frequency, and Program Display – Switches into Temperature Mode when the Temperature Dial is
rotated. The display shows the current Celsius temperature (30–70°C), ashes to the set temperature when the dial is rotated,
then back again.
If the temperature is more then 122°F (50°C) for longer than 3.5 hours, Auto-Protection Feature will decrease it to a safe
113°F (45°C) level, and the display will show [ ].
In Timer mode, the display shows one of 5 heatings time settings 1H, 4H, 8H, 0H, or -H chosen by Timer Control Button .
When the heating program is over, the temperature display will show --, OF, or ON, indicating that Power is ON but the time set
has expired. Add time to resume heating or push the Power Button  to turn o the Controller.
In Magnetism Program mode, the display shows one of the Magnetism program settings. P- (Magnetism OFF for FAR INFRARED
heating function only), PO (manual frequency adjust mode), P1, P2, P3, P4, P5, P6, P7, P8, P9, PA, PC, PE, PF (automatic
Magnetism programs).
If Manual Frequency adjust dial  is in active mode, the display shows current Magnetic frequency in Hz (1–30 pulsations per
second).
The display may also show OF, ickering or static -- if the Power Button is not pressed or the connection between the controller and
the mat is lost. Press Power Button  to turn ON all other controller functions or reconnect the controller to the mat tightly to resume.
6Adjust Temperature Dial – Use to increase or decrease heat 30–70°C (86–158°F). The dial range is marked, indicating the
desired temperature in °F.
7Magnetism Program Button – Choose P- (Magnetism o) one of 13 automatic Program options P1, P2, P3, P4, P5, P6, P7,
P8, P9, PA, PC, PE, PF shown on the Display  or switch to manual frequency adjust mode PO. Press and hold for 3 seconds to
quickly return to P- (Magnetism o). Please, check the Controller user guide for details.
8Adjust Magnetic Frequency Dial – Use to increase or decrease magnetic pulsation frequency from 1 to 30 times per second.
You can try dierent frequencies to nd what works better for you.
9Adjust Magnetic Frequency Dial ON Indicator – Lights up when Magnetism manual adjust dial is ON, frequency is chosen in
manual mode, Magnetism is ON; OFF when it stops.
10 Magnetism ON Indicator – Lights up when Magnetism function is ON; OFF when it stops.
11 Magnetism PROGRAM CYCLE Indicator – Lights up when Magnetism is auto cycled by the program; OFF when the whole
program is over.
CONTROLLER H-60VA for mats, pads, and belt with Magnetism function
cushion it and eliminate the crystals’ pressure. You may add more towels if necessary.
11. Start with the mat on the lowest heat settings, 35–40°C or 96–112°F, and short
sessions only for 15-20 minutes (do not forget to preheat the mat, it will be slightly
warm); watch how your body reacts.
12. If you enjoy shorter sessions and your body reacts well, move up to longer or a more
intensive and frequent sessions.
13. Gradually increase the temperature by several degrees and session time by 5 minutes
each other day, and only if you feel comfortable and want more intensive experience.
14. You should choose the length, intensity, and frequency of the sessions so that you feel
comfortable and refreshed. The Mat is equipped with professional controller with Timer
with 3 settings; it is suggested to use an additional plug-in Timer if you need short
sessions. Usually, lower temperatures have more calming eects, while higher heat levels
provide more stimulation and promote activity.
15. You should also have some rest between the sessions and never start with more than
three a week before you are better informed about how they inuence you.
16. You can also try the magnetic function, on the lowest heating levels, for 20-30
minutes to check how your body reacts. Later if necessary, you will be able to use all
the functions or any of their combinations together. However, we don’t recommend using
magnetic feature on high heat to avoid overstimulating.
17. You should not feel any discomfort — but if there is any, rest several days and restart
with the temperature, length, and frequency set to the lowest possible.
18. Unplug your controller from the wall socket always when not in use. But do not
disconnect the controller from the mat more frequently than necessary to avoid the
connection becoming loose.
1. Consult your health professional to make sure that you can use red light, hot stones,
FIR sauna, and magnetism mat’s features. Take extra care if you have any health issues.
2. Read the USER GUIDE, safety instructions, «use with caution» and contraindication
sections to be sure that the mat is OK for you, especially if you will use it on high heat
settings or sleep on it.
3. Drink a lot of water, juices, herbal teas before, during, and aer sessions, and replenish
minerals such as calcium, potassium, sodium, magnesium, and others lost with sweat or
urine.
4. Create a relaxing surrounding atmosphere.
5. Put the mat on your bed or the oor with crystals facing up.
6. If you have a regular connector, please connect the controller to the mat to t snugly. If
your device comes with an in-line connector, connect it so that the male plugs go inside
the female pins. Then screw the connector so that it’s tight.
7. Turn the controller ON and set the timer, only then set the max temperature to test the
mat for an hour. While it is cooling down, test all functions for 15-20 minutes. Do not
put the protector on the mat or lay on it during this time.
8. Cover the mat ENTIRELY with a blanket to pre-heat the stones for 30-60 minutes to
set level. If the mat is covered only PARTIALLY, it may cause dierent temperatures in
dierent parts of the mat, sensors disruption, and controller malfunction.
9. Do not move a lot on the mat, do not stand on it, do not bend it, and do not put your
head on hot stones. While heating, NEVER put on the mat foam, rubber, yoga, camp
pads, mats, other non-permeable covers, or too thick (more than one inch) plies of towels
or heavy blankets. NEVER put any solid objects such as pillows, laptops, books, bags,
controllers, etc., on the heating surface to avoid overheat, malfunction, and re risks.
10. If the mat is too hard for you, put some of the included pads or covers on the mat to
BIO-MAGNETIC AMETHYST TOURMALINE MIDSIZE V-MAT