MediCrystal Classic Amethyst Mat User manual

2THANK YOU
2 UNBOXING
3 CONTROLLERS
4 ADDITIONAL INFORMATION
5 COVERS
5 SAFETY INSTRUCTIONS
6 CONTRAINDICATIONS
6 TIPS: BEFORE YOU START
7 TIPS: USING YOUR MAT
8 TIPS: USE WITH CAUTION
9 TIPS: TROUBLESHOOTING
10 TIPS: TAKING CARE OF YOUR MAT
11 MAINTENANCE AND CLEANING
11 WARRANTY
11 DISCLAIMER
THANK YOU FOR PURCHASING
MEDICRYSTAL®MAT AND CHOOSING US!
MediCrystal LLC is a small family-owned company dedicated to
customer satisfaction and providing the highest quality health and
beauty products from natural amethyst, agate, tourmaline and jade at
the best possible prices.
We have personally experienced benets from the MediCrystal® and
ThermoGem™ products and have decided to make them available to
our customers for an aordable cost.
We were so impressed by how the functionality of our mats
compared to other, much more expensive brands that we decided to
launch a business focused on creating these amazing products.
Our purpose is to let other people unveil the secret of this reviving
experience at a substantial savings from the competition. We think not
just the wealthy, but everyone interested in holistic, naturopathic and
alternative practices should be able to use the power of these gems
and crystals.
We hope you experience as many positive results as we have,
now that you have your own MediCrystal® Mat!
UNBOXING
THE MAT SET INCLUDES:
When you receive the box, it may have wear due to shipping.
Please take a moment to carefully unpack the box and check if the
set includes everything in the due condition. If you discover that
anything is missing, or there is any other reason that you wouldn’t
rate this as a 5-star experience, please, contact us right away at
[email protected], so that we resolve the issue as fast as
possible.
In addition to hot stone functionality, and deep FIR heat, MediCrystal®
Classic Amethyst Mat naturally generates negative ions through special
layers upon heat distortion when the mat is ON or using your own body
heat when the mat is OFF.
It is a great reason to use the mat regularly to sleep, relax and
reenergize even without heating.
MediCrystal®
Classic Amethyst
Mat
Controller L-40N-B
with terminal
and plug wires
Thick tan 3-D air mesh pad
and/or white waterproof
protector with 3-side zippers
Bag for storage and
carrying the mat
Catalog
and
User Guide
CONTENTS
All products, controllers, specications and data as well as a set of items packaged in a box are subject to change without notice to improve reliability, function or design of the devices.
Please, check for the most updated products details at MediCrystal.com web site.
Controller H-40N / H-60N
with terminal
and plug wires
EMF
FREE
HEATING
SYSTEM
WITH FREE SHIPPING
AND REPLACEMENT
2
YEAR
WARRANTY
OR
®
USER GUIDE
2

CONTROLLERS
1
2
3
4
5
6
1
23
4
5
First you should tightly connect controller to the mat connector and
only aer this plug-in controller into the power outlet. Then turn ON
controller with toggle switch.
Controller also has a temperature dial to completely adjust the heat
in 1°C increments from 86 °F to 158 °F, displayed in Celsius from
30 °C to 70 °C. Sometimes we call the dierent temperatures “levels”.
Level 1 is 86-98 °F or 30-36 °C (Lowest mode, reveals crystals’ powers
and brings negative ions and other vital natural forces into your home while
you are seeking rest and mental clarity, great to sleep or relax).*
Level 2 is 98-110 °F or 36-43 °C (Low mode, provides a comfortable
setting for all night restful sleep to manage an occasional sleeplessness,
improve absentmindedness, relieve tiredness, and maintain proper
immune function).*
Level 3 is 110-120 °F or 43-49 °C (Low medium mode, great to
create maximum relaxation and immunity support environment, helpful
to maintain healthy heart, inspired and invigorated mind, improve look
of your skin).*
Level 4 is 120-133 °F or 49-56 °C (Medium mode, use as a part
of your dietary and healthy routine to maintain cholesterol and sugar
levels already within the normal range, alleviate the occasional blue
feeling everyone experiences from time to time).*
Level 5 is 133-145 °F or 56-63 °C (Medium High mode, may be helpful
for healthy lifestyle to alleviate occasional constipation, promote
sexual arousal and performance, relieve temporary water-weight gain
and mild mood changes bringing you back to normal condition).*
Level 6 is 145-158 °F or 63-70 °C (High mode, envelop yourself with
pleasant warmth of natural crystals and gemstones. Together with exercise
patterns it may encourage activity, contribute to spiritual balance, feeling
happy, cleansing, sweating, well-being and better overall health).*
Level 7 is 158 °F or 70 °C (Highest mode, use with extra care to create
maximum soothing environment important for proper muscles and joints
function, optimal strength and exibility, stress and tension reduction).
The temperatures reect the temperature of the inner heating
elements, not the surface of the mat, which can be 10-20 °F lower (or
even lower than this) if the mat is not covered with a thick blanket.
Usually, if the ambient temperature is around 70 °F, it takes between a
half an hour to hour for the mat to reach the maximum level (158 °F,
or 70 °C) if covered it with a thick blanket.
Controller L-40N-B for Classic mats, pads and belts:
1Power ON/OFF Switch Button – Push it to turn mat
ON/OFF. Controller Temperature display will show
OF until you activate the TIMER .
2Temperature Display – Shows the current temperature
in Celsius (30-70 °C), ashes to the set temperature,
then back again.
3Timer Control Toggle Button – Select 3, 6 or 12 hour
heating session with auto shut-o when time expires.
Timer should be activated rst to start heating. Be
sure to use only the lowest heat setting when sleeping
on the mat.
4Timer ON Indicators – Light ON when Timer is used,
shows the number of hours the mat is set to function.
5Adjust Temperature Dial – Use to increase or decrease
heat 30~70 °C (86~158 °F).
Controller H-40N / H-60N for Classic mats, pads and belts:
1
Power ON/OFF Toggle Button – Push it to turn the mat ON/OFF.
If H-40N controller is used, when you turn it ON, the display  will
show 0H – it is the default heating mode with 12 hours auto shut-o
or it can show blinking lines -- if so, please, activate the Timer and
set session time. If static lines -- are displayed, please press power
button again with some eort so that lines -- start to blink on the
display  showing that the controller is ON and ready to choose the
session time and temperature. If H-60N controller is used, Power
ON indicator  lights up when the Power button is pressed and the
power is ON. Display  may also show ON. You can set the session
time and temperature.
2
Timer Control Toggle Button – Select one of 4 options shown on the
Temperature/Timer display : 1H, 4H, 8H or 0H for 1, 4, 8 or 12
hours heating session with auto shut-o when time expires (H-40N).
H-60N may have one more setting -H for generating ions without any
heating.
3
Temperature and Timer Display – Switches into Temperature Mode
when the Temperature Dial is rotated. Display shows the current
temperature in Celsius (30-70 °C), ashes to the set temperature,
then back again. When the temperature is set above 122 °F (50 °C)
on H-60N controller or above 105 °F (40 °C) on H-40N controller
for longer than 3.5 hours, auto protection feature of H-60N
controller decreases it to safe 113 °F (45 °C) level. H-40N controller
decreases temperature to 105 °F (40 °C). When auto safety feature
is active display shows [ ]. When the heating program is over the
temperature display will show -- indicating that Power is ON.
In Timer mode Display shows one of 4 time settings 1H, 4H, 8H or
0H chosen by Timer Control Button . It may show OF or -- when
the time setting is over or if connection between the controller and
the mat is lost. Reconnect or add time to resume heating or push
the Power Button  to turn-o the Controller.
(please, check point 12, page 5 for details)
4Power ON Indicator (only H-60N) – Lights up when the power ON.
5WARM Operation Indicator – ON when mat is heating, OFF when
set temperature is reached.
6Adjust Temperature Dial – Use to increase or decrease heat
30~70 °C (86~158 °F). The dial range is marked, indicating the
desired temperature in °F.
Controllers H-40N and H-60N can
be dierentiated by the power ON
indicator available on H-60N
but not available on H-40N
®
www.MediCrystal.com
3

1. The top of the mat, with the MediCrystal® Logo on it, is not a
heated area but this and other non-heated areas of the mat still
have anion layers to generate negative ions.
2. MediCrystal® mats have a multilayer system construction with up to
16 dierent layers. The special layers (with anion generating bers)
are added so that the mats generate negative ions when they are
turned on and functioning. Controllers do not have the option to
activate negative ion generation from the inner mat layers because the
ions generation starts automatically when the mat is heating up, due
to the piezoelectric and pyroelectric eects caused by the distorted
crystallographic structure of the mat’s anion generating layers and
natural amethyst crystals. Negative ion generation will decrease when
the mat cools down. The number of ions goes up when you lay on
the non-powered mat as gemstones and negative ion generating
layers start to use your natural body heat to produce anions.
3. The outlets, bimetal safety switches, connectors, and controllers
of all electrical appliances including all brands of hot stone mats
may emit relatively higher levels up to 4-8 mG. Though it is
generally safe, and falls down to zero several inches away, if you
are EMF oversensitive, it is better to keep the controller away
from your head. Also, it is better to use the amethyst pillow or
at least a regular one to avoid occasional contacts between your
head and the mat connector near the logo on the top of the mat.
Or you can lay on the mat with your feet towards the connector.
If you do not feel comfortable on the powered mat, you can
eliminate exposure to any electricity just by preheating your
stone mattress to the maximum heat and unplugging it from
the power outlet before you lie on it. Hot crystals accumulate
the warmth and will naturally release it without electric power. It is
the best practice for long all-night sessions to avoid dehydration,
overstimulation, and buzz or dry mouth eects. Even aer the
mat cools down, it utilizes your body warmth to emit infrared rays
and negative ions naturally and safe.
4. We use the best in the industry advanced EMF-free heating
systems since 2016. Though the specication states maximum
2 mG emission from the heating surface, the real tests with
professional EMFs measuring devices show max 0.2 mG emission.
It is even closer to zero because when we test the background
EMFs on the unplugged mat, it is usually the same as on the
heating mat. You can check our videos for EMFs measurements on
MediCrystal youtube channel. Please disregard outdated, false or
non-professional information or videos about EMFs testing posted
on the internet by unfair competitors. Fortunately, nowadays the
testers are aordable for everyone, and the best practice is to
check EMFs of the mat and other home appliances yourself. The
best EMFs meters for home use combine simplicity, sensitivity to
electric and magnetic waves in a broad range, and ability to lter
out the noise distortions or measurement errors. We recommend
an easy to use the “K2 EMFs meter” manufactured in the U.S. and
available on Amazon for $60. This meter covers frequencies from
50 to 20,000 Hz and works ne instantly measuring EMFs of any
appliances.
5. Due to the artisan nature of the construction process there is some
dierence between mats regarding the maximum temperature
they may reach in the same conditions and the heating speed. If
the mat is covered with thick blanket or your body is on the mat, the
max level of the bare mat surface temperature may be in the range of
55-65 °C or 133–158 °F (displayed by the controller measuring the
temperature of the heating elements inside the mat as 65-72 °C),
which is quite normal. It is very important that you cover the mat
COMPLETELY while preheating it. If you cover the mat partially
the temperature sensors positioned in the dierent layers of the
mat around all the surface will report dierent and controvercial
measurements to the main controller. Finally controller may loose
calibration and start to work incorrectly or malfunction.
6. Mini mat is great for localized use, when you need to apply heating
crystal rays and focus to some area of your body (back or legs
most frequently) without causing the whole body to undergo
hyperthermia. You can use it on high heat for local application
without overstimulating the whole body. It is portable, more
bendable, and can be used to cover the body when you are on the
large mat for the more intensive “sandwiched” sessions. Of course,
the Mini mat can still be used as a sole unit for high heat detox
sessions with sweating, but it takes more time to inuence the body
in this way. But if you use high temperature and your body usually
sweats in the sauna or when you do sports or workout, the Mini will
work ne as well.
7. In general the bigger and more powerful the mat is, more benets
it brings and the shorter the sessions necessary. Midsize and
larger mats are great for both the whole body experience and re-
energizing sleep. Just be sure that the heat level is on the safe,
lowest levels of 30-45°C or use the mat either unpowered or in
negative-ions-only mode at night. Do not use high heat when you
go to bed. Do not rely solely on the timer. Some customers choose
to connect the mat through another timer plugged into the the wall
outlet for double safety in order not to fall asleep on the hot mat and
dehydrate. Take extra care during nighttime use and keep the mat
only on low heat settings.
ADDITIONAL INFO
®
USER GUIDE
4

MediCrystal® mats have been carefully engineered for both eectiveness
and safety. But of course basic safety precautions should always be
observed when using any electrical device.
1. Never immerse the mat in water, do not use the product in wet or
excessively humid areas. Do not use the device when your hands or
body are wet.
2. Changes or modications to the device can be dangerous and may cause
electric shock. Do not disassemble anything while the power is ON.
3. Do not put heavy objects on the mat. Do not prick the mattress
with pins, knives or sharp objects. Do not step, walk, jump, run
and avoid other types of pressure which can damage inner sensors.
4. Do not put chemicals, solvents, volatile or ammable materials
such as benzene, thinner or kerosene on the mattress.
5. Make sure that the receptacle where you plan to plug the mat has
the same voltage rating as the specications indicated for each
product (usually 110-120V/60 Hz for North America and Japan and
220-250V/50 Hz for Europe and other countries). Do not use travel
adaptors in order not to damage your mat and controller.
6. If your mat is made for U.S. electricity, 110-120V/60 Hz, with plugs
for a standard U.S. grounded socket to use in 220-250V countries,
please purchase a step down power converter transforming 220-
240V to 110V. For smaller pads we recommend power converters
with 200-300W capacity, up to 500W for large mats and 1000W for
queen size mats with two heating zones.
7. Always remember to turn o the electrical supply when not in use.
When unplugging device, do not attempt to pull the cord, pull it
out by holding the plug.
8. To protect your mat, use a surge protector. Power spike is the main reason
why a mat would ever malfunction, an electrical surge kills the controller
and renders the mat unusable until a new controller is purchased.
9. Do not use the device when the cord is damaged or if the electrical
outlet is excessively loose, nd another socket that will correctly
hold the plug. Do not use the mat if it is damaged or if connection
between the mat and controller is not tight.
10. Your mat has double safety advanced EMF free heating system with
emergency bimetal switches physically cutting o the electrical
wires if the mat’s main thermostat safety system fails and it
overheats to 180 °F (75 °C). Anyhow stop using and immediately
unplug the mat from its power source (wall outlet) if you experience
strange conditions such as smell, smoke, shocks and/or re.
11. Clean the mat only when the power is o and the controller is
unplugged from the AC outlet.
12. While heating NEVER put on the mat foam, rubber, yoga, camp
pads, mats, non-permeable covers or too thick (more than one
inch) plies of towels or heavy blankets to avoid overheating,
malfunction and re risks. If the topper you use on the heating mat
is not permeable (like rubber), it will trap the FIR heat, and the mat
will regularly overheat. Though, in this case, bimetal switches cut-
o electricity, when they work permanently, they wear o fast, and
the re danger goes up. This safety feature is designed to stop the
mat overheating only in emergency case if the controller fails. It is
not intended to operate as the main thermostat. If the whole mat is
covered with non-permeable material and continuously overheats,
the bimetal switches function all the time and wear-o. If they fail,
the mat will not be protected from overheating or re risks.
13. NEVER leave your mat unattended while heating up. NEVER heat
it in folded or rolled condition. NEVER put any solid objects such
as pillows, laptops, books, controllers, bags, etc. on the heating
surface of the thermal mat, since the heating system can burn it
and damage the mat. Bimetal switches work to protect the mat with
a body on it, or if the entire heating surface is covered uniformly
and only with porous layers. Emergency protection system may not
stop local overheat if it takes place only on a small part of the mat,
where there are no temperature sensors or bimetal switches.
COVERS
*MediCrystal® products are not intended to diagnose, cure, treat, mitigate or prevent any disease, illness or medical condition or to substitute for medical treatment of any kind.
Information here is never to be construed as medical advice. These products and statements have not been evaluated by U.S. FDA (please, see Disclaimer in this user guide, page 11).
Your mat set should include, free of charge, at least one protective
cover, but usually we include a pair of dierent items. So you may
have one or two of the following covers:
1. Thick Tan 3-D Air Mesh Pad to cushion the mat, distribute body
weight, buer the crystals’ pressure either while sleeping on the mat
or during longer sessions. This is especially eective at the beginning
if the mat’s hardness is an issue. This 3-D Pad is not waterproof, and
it needs a cover or a towel on top. This Pad is recommended to be
hand washed and air dried to keep shape.
2. Thick High Absorption Waterproof Quilted Multilayer Protector
with a single MediCrystal® logo embroidery on the top and zipper
along three sides to put the mat inside of and to protect the bottom
as well. As with the other covers, it is permeable for FIR rays, PEMF
and ions. It is great for absorbing sweat and for keeping the contact
surfaces between the body and the mat dry. This pillow case style
protector is machine washable on gentle or hand wash cycle. Air
drying is recommended.
3. Thick Multilayer Protective Cover with multiple MediCrystal®
logo on the top and built-in thin 3-D Air Mesh Pad permeable
for FIR rays, ions. It also keeps the contact surfaces between the
body and the mat dry. This protector is used for cushioning the mat,
distributing body weight, and buering the crystals’ pressure either
while sleeping on the mat or for long sessions. These covers with
100% bamboo top air layers are not washable. Instead of washing,
we recommend leaving the mat with the pad on it for one hour every
week on the highest heat setting to keep both of them clean and
disinfected. Newer generation covers have top perforated air layer
SAFETY INSTRUCTIONS
with small addition of polyester and are hand washable. This cover is
xed on the mat with an elastic skirt.
4. Thin Waterproof Cover with 4-cornered elastic straps, to be used
on top of the 3-D Pad Protector or on top of the mat directly. Great
for short and high intensive sessions. This thin cover is machine
washable and dryer-friendly. Gentle cycle is recommended.
We hope that our protectors help you feel more comfortable during the
sessions.
If the cover you want is not included in the set, it may be purchased
from MediCrystal®.
Please, check for more
information about covers
in the MediCrystal®
Catalog.
®
www.MediCrystal.com
5

CONTRAINDICATIONS*
The following may not be a full list of contraindications but if you
have any of them, avoid use of the far infrared mat, belt or wraps in
heating mode completely (unless you get approval from your doctor).
Remember that it is your responsibility to seek the attention of a
health care professional before and during the use of this product,
which is not marketed as a medical device, nor claimed to be able
to heal or cure any sickness.
1. The recipients of any type of organ transplant should not use any
FIR pads. Aer organ transplant operations, patients usually are
prescribed immunosuppressant drugs to help prevent their immune
system from rejecting the transplanted organs. FIR and hot stone
sessions increase immune system function which is absolutely
contraindicated for organ transplant recipients.*
2. Pacemakers and debrillators users should not use FIR mats, belts or
wraps in powered modes without cardiologist approval. The function
of these products may be interfered with by the belts’ or wraps’
magnetic or heating functions.*
3. Expectant women should not use the heating practices. Excessive
temperatures have a potential for fetal damage. If pregnancy is
possible you should be able to use your mat, belt or pad in unpowered
mode for ion function but be sure to consult a physician before using
it for heating.*
4. Newborns and infants should not use the heat function. Their core body
temperature rises much faster than that of adults. This occurs due to
a higher metabolic rate per body mass, limited circulatory adaptation
to increased cardiac demands, and the inability to regulate body
temperature by sweating as well as adults are able to. Do not use your
mat, belt or wraps in heating modes on babies who cannot move away
or on children who cannot speak enough well to express themselves.*
5. Avoid use of the products in heating mode completely (unless you
get approval from your doctor) in the case of a recent stroke, aortic
stenosis, myocardial infarction, heart attack, unstable angina
pectoris, if you take corticosteroids or have brain or other tumors.*
6. Anybody with diseases associated with a reduced ability to sweat or
insensitivity to heat should use products without heat, in negative
ions mode. Diabetic neuropathy may be a contraindication because
some diabetic patients loose sensitivity to heat.*
7. Nobody with diagnosed diseases, ailments or medical conditions
should ever use these products without approval from and/or
supervision of a physician. It may be extremely dangerous to raise the
body temperature to high levels for people with: Adrenal suppression
disorders, Addison’s disease, adrenal Insuciency, systematic
lupus erythematous, multiple sclerosis (MS), brain tumors, bypass
surgery, high hypertension or some other conditions.*
8. Anybody taking medications or currently going under medical
treatments, radiation or chemotherapy should consult a physician
before using the products in heating mode. Some medicines as
diuretics, barbiturates, and beta-blockers may impair the body’s
natural heat loss mechanisms. Some over the counter drugs such as
antihistamines, blood thinners may also cause the body to be more
prone to heat stroke. Sleeping aids, pain killers, narcotics, anti-
psychotic medicines may be the most dangerous in impairing one’s
judgement. People under inuence of drugs, alcohol or intoxication
as well as patients with mental impairments or dementia should never
use the hot stone mats,pads, wraps, belt or other heating devices.*
9. Anybody experiencing a high fever should not use theproducts in
heating mode. Only the negative ions function can be used until the
fever stops.*
10. If you use heating creams or balms, liniments, salves or ointments
that contain heatproducing ingredients, you should never use them
with the belts, pads, wraps, mats unless recommended by a health
care professional so as to avoid burns.*
11. Anybody with fresh wounds, trauma, joint injuries or swollen hot joints
where the cold practices is necessary should not use any FIR mat, belt or
pad in heating mode, so as to avoid exacerbating any inammation.*
12. Anyone with a mental or physical disability or those with limited
mobility should use MediCrystal® products in the negative-ions-only
mode unless under full supervision of a medical professional and
have a doctor’s approval.*
13. It is not recommended to use any part of the heating area of
your product directly on your head. Our brains do not have same
ecient cooling system as the other body does. Use a pillow as a
barrier between your head and the mat if you plan to sleep on it.
The special MediCrystal® Amethyst Pillow with crystals is strongly
recommended to keep your head elevated and cool.*
14. Stop using the products if any known conditions worsen while using
it. Pain should not be experienced when using them. However,
the infrared heat will go to areas of disease or discomfort – some
people may perceive this as pain and others as a sensation. If pain is
persistent, discontinue use.*
If you have any of these conditions, avoid using the products
completely unless under the care of a doctor with expertise in hot
stone or sauna detoxication.
While the above are some of the conditions which may pose dangers
denitely check with your doctor or a health professional experienced
in Far Infrared or sauna practices about your specic medical condition.
Remember that it is very important to properly hydrate with
pure and mineralized water before and aer sessions especially if
you sweat and loose electrolytes. It will help to avoid dry mouth
feeling, weekness and other symptoms of dehydration. A general
rule of thumb is to never begin a session thirsty or dehydrated and
drink a lot of mineral water, herbal teas or juices.
TIPS: BEFORE YOU START
1. Please study the Catalog and User Guide included with your
product before rst use. They are easy to operate but the User
Guide has important safety information and a lot of dierent
useful tips that may help you get more benets and accelerate
the learning curve. Be sure to completely study the list of
contraindications and discuss them with a health professional.
2. Subscribe to MediCrystal® on youtube for educational videos. Our
youtube channel is https://www.youtube.com/MediCrystal
3. Consult your doctor how to use, especially it is important if you have
any chronic disease. Even if your health professional is not familiar
with hot crystal FIR, doctors usually can give good advice about how
such or similar well-known technologies like sauna or heating pads
will work, especially in the case of any existing health condition.
4. When you get the box with your product, if it is too cold or too
hot or wet outside, please, keep it inside for an hour to adjust
to room temperature and humidity before connecting to the
power socket. Open the box and take out your product carefully,
especially if it is a heavy one you may need someone’s help.
Check that all accessories are included. Put it on the oor, bed
or other at surface with the crystals side facing up.
5. Our products have special layers in the bottom that reect the heat
upwards. But if you use them laying on a hardwood oor or on a
memory foam mattress and the heating pad is under your body, it
may be better to put a towel beneath to dissipate any remaining heat.
6. If your area is subject to frequent electrical blackouts or power
spikes, it could be better to connect your product to electricity
®
USER GUIDE
6

through a surge protector, AVR or UPS device similar to that
one which protects computers or refrigerators. It will protect the
controller from any malfunctions resulting from a power surge.
Please remember to turn the controller OFF and unplug your
product from the power socket aer use.
7. The rst heating should be to test your product at the highest
temperature level (70 °C equal to 158 °F) for 2-3 hours. This
will also help purge any possible odors from the fabric and other
layers’ remaining volatile particles. If you are oversensitive to
smells you may choose to air it out in a garage overnight. Our
mats and pads are made from the highest quality, ‘zero-emission’
*MediCrystal® products are not intended to diagnose, cure, treat, mitigate or prevent any disease, illness or medical condition or to substitute for medical treatment of any kind.
Information here is never to be construed as medical advice. These products and statements have not been evaluated by U.S. FDA (please, see Disclaimer in this user guide, page 11).
TIPS: USING YOUR MAT
materials but it is still better to do this. Do not put the protector
on the product or lay on it during this time.
8. Find a secure, dedicated area with calm surrounding and good
time to use your product with some degree of concentration.
Put up “do not disturb signs” and play some soothing music to
enhance your experience. Put on comfortable sleepwear and
relax. It may be a good idea to clean and scrub your body
to open the pores before your sessions, as this will facilitate
sweating and detoxication. You can preheat your belt, vest or
wraps and wear them concealed under clothes walking or running
outside. Mats are stationary and better to use them at home.
1. It usually takes around 30-60 minutes for the Mat to reach the
maximum temperature if you put both a thick protector and a
thick blanket on top. Cover the mat with a blanket and leave it
periodically, checking how hot it is under the blanket.
2. The heating process stops and resumes again when the mat
cools down, to maintain the set temperature. During this time,
the gems become very warm and emit radiant Far Infra-Red rays.
3. For extra electrical safety the heating wires are positioned a short
distance from the mat’s edges so that the end tubes with crystals
are heated indirectly by other stones. It is normal when these close
to edges of the mat stones have a lower temperature.
4. When the heat is on, the surface temperature of the bare mat under
the blanket, or under your body if you are on the mat, becomes hot
to touch. At maximum heat level it will reach 140-150 °F (60-
65 °C) on the surface, if measured immediately aer you stand
up or remove the thick blanket or pillow. But if you measure
the bare mat surface temperature in several minutes again it
will be much lower, around 110-130 °F (40-50 °C). If the mat
is uncovered, and room temperature is low or the air ow is strong,
it will cool the mat very quickly. This is normal – when preheated,
the crystals transfer most of the energy in the form of Far Infrared
Rays very quickly.
5. If you keep your mat open without the protector pad, blanket, or
your body on it, the heat is dissipated – and though the controller
may continue to show rather high temperature inside the mat’s
heating elements, the surface will be merely warm to touch even
on highest level.
6. Sometimes when the mat starts to heat some humming or buzz
noise can be heard from the controller which is quite normal. But
if the noise gets stronger or you feel any smell or other signs
of possible controller or mat failure, please stop using the mat.
7. It is OK for the controller to warm up a little when the mat is on
the highest heat level for a long time. But it is not normal if the
controller gets really hot or if you notice any smell. Please turn
o the mat and contact us for a free replacement if this happens.
Remember not to put controller on the mat, even if the mat is
cool. It may heat up and damage the controller.
8. The most frequent reason for initial controller malfunction is an
incorrect order of connection. It is necessary to connect the
mat to the controller rst, TIGHTLY, and only aer this should
you plug the controller into the outlet, then turn it on and set
the timer. Aer this you may set desired temperature. When you
disconnect, rst turn the controller to OFF, then disconnect the
plug from the socket – and only aer this (and only if it is
necessary), unplug the controller from the mat.
9. Do not disconnect the controller from the mat more frequently
than necessary, in order to avoid the connection becoming
loose. If you connect the controller to the power source rst
(before connecting it to the mat), the safety program will lock
the controller and put it in ‘safe’ mode. It may start to beep or
will show OF or other error code on the screen. To reactivate the
controller simply reconnect it in the correct order.
10. Choose the best position. FIR amethyst rays penetrate deep and
may awake resonant vibrations on micro level so that even aer
the session is over the body temperature may stay elevated
to normal level of 98.6 °F for up to 8 hours, which is good for
activity and rejuvenation. This phenomenon is described in the
European bestseller «98,6 – Ideal Body Temperature as the Secret
to Optimum Health» by famous German naturopath Dr Uwe. But
there is also the local eect when those organs and tissues which
are closest to the mat receive more heat. It may be benecial
for them, but the highest levels may also cause some issues with
movement if you have stones, etc. If you lay on your right side,
please be sure that you do not have gallstones in the bladder
and that it is healthy. Heat may cause gallstone movements and
cause inammation and pain. If you lay on the mat on your belly,
it is important to protect your genitals. The le side is safer in this
regard, but usually laying on one’s back is the best position.*
11. If the mat feels hard at the starting point, it is essential to
cushion it and eliminate the crystals’ pressure correctly. Put on
top a 3-D pad, and a cover included into the set of your mat. You
can add several layers of bamboo, cotton sheets or towels, but not
more than one inch thick to make your mat even soer. As soon
as your body gets used to the crystals’ pressure, you may choose
to remove the extra layers one-by-one. Protectors and towels are
great for sweat absorption during heating sessions or for moderate
cushioning, but for high intensity, it may be better to use your
mat without any covering. With FIR, some of the heating rays will
dissipate if you use a thicker layer on top of the stone mat and
under your body. The same applies to negative ions, but most will
still travel through. As for longer sessions, even with covers the
mat can still be too hard to sleep and too heavy to remove it from
your bed every evening (especially if you have a large size mat).
A simple solution is to put a 3-4 inch thick mattress pad on top,
which is lighter and easier to handle than the stone mat. Be aware
that you can cover your mat with a thicker than one-inch layer or a
non-permeable foam pad ONLY aer the mat cools down. To avoid
overheating and re risks NEVER heat your mat with the topper or
thick layer on it. Always remove the topper rst and leave only a
thin cover or a 3-D pad before you turn ON heating function.
12. Always keep your Waterproof Protector on the mat to protect it
from spills and dirt. But even if your mat occasionally gets wet, do
not worry, it has waterproof layers inside. Just let it completely dry
before using it again if it gets wet.
13. Be careful with your rst session. Use a slow and continuous
mode of increasing intensity. Begin with temperature levels as
®
www.MediCrystal.com
7

low as 96–112 °F (35-45 °C) and short sessions, no more than
a half hour, and gradually increase the length and intensity for
several minutes and/or degrees every other day. Remember to
drink a lot of water, fresh juices, or herbal teas. Replenish
minerals to avoid becoming drained or dehydrated. When you
start it is important to avoid overuse, and low temperature burns
and get the rst benets in a safe manner without the risks of side
eects from a “healing crisis”.
14. Most important is to listen to your body as you move forward –
“LOW and SLOW”. It is easy to overdo if you move ahead too quickly,
and the cumulative eects are much more desirable without the
lightheadedness or other side eects that can come with rapid
detoxication. The maximum time for each heat level is not specied.
It depends on the mat’s size, temperature level, and one’s age, health,
body size and composition, and many other factors. Basically, the
main rule is to start with low settings and gradually increase
the intensity, length and frequency of sessions. Of course if you
are an experienced FIR sauna user, you can start with the maximum
temperature level, or you can even use the sandwiched-between-
two-mats session, but we always recommend checking with your
doctor rst and using common sense to avoid overuse.
15. As soon as you are sure that your body reacts ne, you can use
your mat as long as you like. Unless you have special needs,
you can use it from a few times a week for 30 minutes to 12
hours daily and it should be an enjoyable process. If you want
an intensive sweating sauna-like detox, choose the maximum
temperature suitable for your health and cover your body with a
blanket or another mat. If you just want comfort, set the medium
heat levels at around 112–122 °F (45-50 °C). If you are just
starting out 20 minutes may be enough. Dierent people react
dierently and enjoy dierent modes. Some folks with weakness
caused by hypothermia use FIR mats all the time on slightly warm
temperature to revive and feel well again. Other people use
amethyst heating mats from one hour on high temperature to 12
hours on warm temperature. Be sure that sessions are comfortable
for you and bring about a better feeling and more energy, and of
course remember to get approval from a health professional.
16. If you accelerate this way, the rst aim is to create a feeling of
relaxation. To relax, you may have a short session before bedtime
of about half an hour, starting at 40-50 °C, and then decreasing
to the lowest levels of 30-40 °C If these levels cause any lightheaded
feeling or overstimulation, the temperature should be set even lower
or even the mat should be used in unpowered mode. Especially in the
summer, when it can absorb some excess heat from your body and
naturally return it in the form of radiant crystal rays to those parts of
TIPS: USE WITH CAUTION*
your body which need more soothing warmth.*
17. The second target usually is to cause sweating, which is great
for detoxifying the body. All intensive high heat sessions should
be done with proper rehydration and electrolyte replenishment,
and within the rst half of the day. It may take up to an hour to
preheat the mat under a thick blanket to a high heat level. Then you
can lay on your back on a bare mat, or a mat with a thin protector
or a towel on it and cover yourself with a blanket. Aer the session,
just leave the bare mat for half hour more while still heating to dry
it out. Of course if your body does not sweat much, you may not
start to sweat from the rst session – but aer several it should
come. Drink a lot of hot herbal teas (not cold drinks) before and
during the session to accelerate sweating. When your body gets
used to sweating it will be easier to sweat voluntarily.*
18. For FIR Heating, if you lay bare on the bare mat with your
body covered with a thick blanket, you will get the maximum
“detox” eect, as no heat will be lost or dissipated. All crystal
rays will be radiated into your body. Some advanced customers
even use foil blankets reecting FIR Rays back to the body,
but it is very intensive practice and it cannot be recommended
without a doctor’s approval. Sweat releases a lot of toxins, and
FIR releases even those stored in deep fat tissue, into the blood. It
may be irritating and erosive to the surface of the mat. That is why
something like a sheet or a protector cover under your body is must-
have for everybody. Perspiration may also temporarily make you feel
worse, but when the sweat is out you should feel refreshed.*
19.Wearing clothes or using covers or sheets on the mat hinders
some of the anion eects, but it should not be an obstacle to
FIR Heat.
20. If you are falling asleep while on mat, choose 30-45 °C or 86-
110 °F low level of FIR Heat before going to bed.*
21. Getting a headache or feeling dizzy is a sign of “healing crisis”
(dehydration). It means that you are detoxing too fast. Lower the
temperature, drink more water and stay on the mat for shorter
time. It is important to feel comfortable and enjoy your experience,
so listen to your body and adjust intensity and duration accordingly.
22.Classic MediCrystal® mats are designed to be used at on your
bed, massage table or sofa. Classic Mini Mat (20x32”) can be bent
up to some degree to cover your body while heating. But the
special Chair Mat is a preferable choice for sitting practices in your
chair, recliner or on the sofa and only the exible MediCrystal®
pads and blankets can be bent to wrap your body.
1. Extra care is necessary if you are diagnosed with diabetes. If
patient has a lot of sugar in the blood, it clots the blood vessels
and causes nerve disorders. Some people with diabetes can, over
time, develop nerve damage throughout the body. It is called
diabetic neuropathy. If you have diabetic neuropathy and loss of
sensitivity you should use a strict time/frequency/temperature
protocol established by your doctor, and only under supervision.
You should start very slowly and monitor your blood sugar.*
2. Titanium pins, rods, articial joints or any other modern surgical
implants usually reect FIR rays so they should be generally safe.
But some joint replacements and piercings with other metals may
be warmed by infrared rays. So safety precautions should be
taken if you lay with joint replacements in direct contact with
the mat. If you lay on your back and knee or hip replacements
are above the mat, there should not be a problem. But of course
if you feel any discomfort in the implants area, it would be
better to decrease the temperature and session length or to
turn the mat OFF. It is also advised that you consult your surgeon
and implant manufacturer.*
3. Silicon implants may be warmed by infrared rays, so safety
precautions should be taken if you lay with implants in direct
contact with the heating pad. If one has breast implants but
lays face-up, there should not be a problem. Usually silicon used
in medical implants is known to melt at over 200 °C (392 °F),
so it should not be adversely aected by infrared rays. Please,
consult your surgeon and implants manufacturer prior to use of
heat directly on implants areas.*
4. Heating of the low back or low abdomen areas of a woman’s body
during the menstrual period may temporarily increase their menstrual
discharge. Some women endure this process to gain the pain
relief commonly associated with their cycle, whereas others simply
choose to avoid using the product during that time of the month.*
5. It is reasonable not to use any heating pad on your groin area,
face, head and all other areas sensitive to heat. If contraception
®
USER GUIDE
8

is not your aim, do not apply heat to your genitals. You can use
a cooling pad or make a non-permeable for FIR rays screen with a
towel folded many times and covered with several layers of standard
aluminum foil. It helps for short sessions.*
6. Children may use mats or other items with caution and under
supervision of adults, preferably on low heat or negative ions
mode only. Consult with the child’s pediatrician before using the
FIR pads and use common sense. Do not leave children or toddlers
on the mat, or with the belt, wraps or other hot stone pad without
supervision. They can walk, play or jump on the pad with crystals
and damage inner sensors. Children can disconnect cables and put
them into their mouths and get shocked. Take extra care if your
child has access to the room where the belt or hands wrap or any
other electrical device is located.*
7. If you use medicines applied by skin patches, you should
denitely consult your doctor. The absorption rate of a
transdermal medication can change. If you use an adhesive, it
may also unglue from your skin due to sweating.*
8. Cats and dogs love amethyst and gemstone pads. They feel some
energies better than humans. We suggest to have an additional
waterproof cover for the pad to protect it from any liquid
and make sure your pet will not chew or scratch the cable,
controller or pad. We recommend cheaper and safe non-
powered, non-electric amethyst or gemstone mats for pets.
Consult with a veterinarian prior to use mats, pads, belt or wraps
for heating. Be careful with pets sleeping on the device. It should
always be turned o without supervision.*
9. You should always drink A LOT before the session, during the
session and aer the session – if you feel dry mouth it means
that there is not enough water in the body. And it should not
be just water, you may need to replenish some electrolytes and
minerals as Ca, K, Mg, Na. Twitching may be a sign of these salts’
serious decit or imbalance so if you sweat a lot herbal teas, fruit
juices, and mineral water rich in K and Mg or mineral supplements
may be necessary. Proper hydration also promotes all eects
improving detoxication caused by sweating.*
10. Overusing the product on maximum temperature may result
in excessive stimulation. Use moderately on high temperature.
Even if your product can heat in a continuous mode, it is strongly
recommended not to use the high heat settings for more than 3 hours
for your safety! Some temporary symptoms of organism detoxication
(“healing crisis”) may occur especially if you start too fast.*
11. Detoxication high heat program should not be done without a
doctor’s approval and supervision. Some drugs, chemicals, and
toxins which we take into our bodies with air or food end up getting
stored in our fat tissue. They can aect you as you mobilize them
and sweat them out. Before toxins are excreted and exit through
the sweat pores they are absorbed from your decomposed by FIR
heat fat tissues into the bloodstream. While traveling on their way
to be eliminated, substances can exert the same eects that they
do when you had originally taken them. If a lot of residue was
accumulated in your fat tissue and their release is too fast, the
buildup of these poisons can make you feel worse. That is what
is called detoxication or a “healing crisis”. If you are chemically
allergic or extra sensitive, the dangers of infrared function,
regarding the release of toxins, may be serious. If you feel any signs
of “healing crisis”, stop using the product and consult your doctor
as the same symptoms may be also the signs of serious illness.
12.William Rea, MD, one of the most knowledgeable doctors in the
world regarding environmental toxicity and sauna detoxication,
warns: “Uncontrolled, too-rapid mobilization can have
devastating eects on chemically sensitive patients.” Of course
it does not mean that chemically sensitive people cannot get rid
of toxins. Just that it should be done very slowly and carefully, and
with a doctor’s supervised detox program. Slowly and gradually
increasing heat level, session length, and frequency is the
best path forward and It is important to immediately decrease
intensity, duration and frequency of sessions and contact your
health professional if you feel symptoms of a “healing crisis”.*
13.The most important thing when you start to use the mat is to
avoid acupressure overstimulation and overheating. If you would
like to sleep on your mat, do it slowly, adapting your body to
the pressure. You can start with shorter sessions at bedtime with
3-D Pad and extra cushioning layers and move forward gradually.
It is like acupuncture – there’s no need to overstimulate the body
from the outset, it is better to increase the intensity of pressure
slowly and continuously.
14.Very careful approach is appropriate to FIR heat function. Our
skin sensors can easily detect the high temperature caused by
standard conduction heat, but our ability to feel the eects
of radiant infrared heat is limited. The FIR warmth is much
more penetrating, so the hot stone pads should be used on much
lower sensible temperature than a standard heating pad, and it
demands extra care, especially for long or all-night use.
Use common sense, self-educate, listen to your body and we hope
you experience as many positive results as we have, now that you
have your own MediCrystal® Mat, Belt, Pad or Wraps.
*MediCrystal® products are not intended to diagnose, cure, treat, mitigate or prevent any disease, illness or medical condition or to substitute for medical treatment of any kind.
Information here is never to be construed as medical advice. These products and statements have not been evaluated by U.S. FDA (please, see Disclaimer in this user guide, page 11).
1. Ensure the electrical wall socket that you’ve plugged the
apparatus into is working correctly. Plug another device into it
to ensure it has power. If it is not working, consider checking the
electrical panel as a breaker may have popped (or broken) and
needs to be reset. Or try another electrical wall socket that you
have veried is powering other devices. If you are using a surge
protector, ensure it is working properly. Plug another electrical
device into and verify that it is working.
2. Ensure the controller’s plug is pushed all the way in to the
belt’s receptacle socket so that it is snug tight with no space
at all between the plug and the mat’s (belt’s or pad’s) or hands
wrap’s socket. A loose connection can cause loss of signal exchange
between the mat with crystals and the controller, and when too many
errors accumulate the controller’s calibration may fail. Controller
will show error messages or the apparatus will not heat up properly.
3. Make sure that the power button on the controller has been
turned ON. The controller may show OFF on display. It means
that either preset heating time is over or the connection between
controller and belt or hands wrap is lost. Try adding time,
powering the controller ON/OFF, or reconnecting it.
4. Please activate the timer button and choose one of the timer settings
to start heating. Some models of the controllers do not activate
heating function unless a timer is set.
5. Frequent reason for the new controller fault and errors is an
incorrect order of controller connection. Please, rst connect
the pad, mat, belt or wraps to the controller, and only aer
this plug the controller into an electrical outlet and turn
the controller ON. When you disconnect, rst turn it OFF, then
disconnect the plug from the socket, and only aer this unplug the
controller from the apparatus. If you connect the controller to
the power source rst, the safety program may lock it and go
TIPS: TROUBLESHOOTING
®
www.MediCrystal.com
9

into safe mode. It may start to beep or will show OF or OP error
on the screen. The same may happen if there is a loss of signal
interchange between the belt or hands wrap and the controller. To
reset it just reconnect it in the correct order.
6. If controller shows errors, the easiest way to solve the
problem is to reset it. Disconnect the plug from the socket
rst and then from the belt or hands wrap connection terminal.
When you disconnect the plug from the appliance, please always
do it carefully with two hands, holding the connector with one
hand while the other hand pulls the plug. Pull the plug out of the
connector on the device carefully as well. Do not pull it by the
cable or the connection between the hot stone mat terminal
and the controller plug may become loose. Aer this always rst
reconnect the controller to the mat tightly and then plug it into
an electrical outlet again. Be sure that the socket has electrical
power, this can be tested by using any other electrical device.
Reconnection and reset are the most common ways to
eliminate errors and reload the controller.
But if reconnection or any other way of troubleshooting do not
improve the situation, it likely means that there is a problem with
the controller. If your controller was not accidentally damaged or
ooded we will replace it ASAP, fast and free.
For warranty service, please contact us at
[email protected]
7. Do not worry if your mat or pad are not hot to touch. All FIR
Amethyst mats do not work like conventional heating pads. Most of
the energy from the hot stone mat, pad, belt or wraps in the form
of Far Infrared Rays heat, is transferred by radiation, and not by
conduction (as is the case with standard heating pads, which are
hotter to the touch but do not heat the body much). If the hot stone
mat is le uncovered, it should be slightly warm on lower levels, warm
on medium levels and very warm on high levels – but the transferred
heating energy is actually much higher, and this warmth is far more
penetrating. So the hot stone pads of any size from the small belts or
wraps up to Single or Queen mats should be used on a much lower,
more prudent temperature than a standard electrical heating device –
and it demands extra care, especially for all night use.
8. It usually takes around 30-60 minutes for the pad to
reach the maximum temperature if you put both a thick
protector and a thick blanket on top. The heating stops and
resumes again when the pad cools down, to maintain the set
temperature. During this time, the gems become very warm
and emit radiant Far Infrared rays. For extra electrical safety
the heating wires are positioned a short distance from the belt’s
edges so that the end tubes with crystals are heated indirectly
by other stones (these stones may have a lower temperature).
The surface temperature of the bare pad under the blanket, or
under your body if you are on the mat or pad, becomes hot to
the touch, especially in those areas which are covered by lm
or mesh. At maximum heat level It will reach 140-150 °F on
the surface, if measured immediately aer you stand up or
remove the thick blanket. But if you measure the bare belt
or hands wrap surface temperature in several minutes again
it will be much lower, around 110-130 °F. If the pad with
crystals is uncovered, and room temperature is low or the air
ow is strong, it will cool down very quickly. This is normal –
when preheated, the crystals transfer most of the energy in the
form of Far Infrared Rays. Hot stones radiate heat very quickly.
If you keep your mat, belt, wraps or any other hot stone pad
open without the protector pad, blanket, or your body on it,
the heat is dissipated – and though the controller may continue
to show rather high temperature inside the heating elements,
the surface will be merely warm to touch even on highest level.
TIPS: TAKING CARE OF YOUR MAT
1. The mat should not be used outside if you are not sure about weather.
Use it indoors on at surface as massage table, bed, sofa, mattress
or oor. It’s ok if the surface is not ideally hard and at as board.
2. On sunny day you can “clean” and recharge your mat, belt or
wrap crystals. if you are sure that the rains are far away, leave
the mat or pad on the sun with crystals side upward for a while.
Ancient practitioners believed that sun beams clean Amethysts
taking away negative information accumulated while healing
and renews the crystals powers. Modern science says that
it is the UV (ultraviolet) light part of sun spectrum that kills
microbes and disinfects crystals. But anyhow it is worth doing at
least several times a year. It is wonderful to see how amethysts
and other gems really absorb a lot of energy from sunshine and
become much hotter than on the max level of electrical heating.
3. Only the exible MediCrystal® pads and blankets can be bent
to wrap your body or used on chair or recliner while heating.
Classic Mini Mat (20x32”) can also be bent up to some degree
to cover your body while heating. But special Chair Mat is a
preferable choice for sitting practices in your chair or on the sofa.
4. Sometimes controllers and even devices issues happen aer
power spikes. When hurricanes or storms are approaching, if you
are not going to use your hot stone pad for a while, or if you are
leaving your home for a weekend or vacation it is better to unplug
it from the socket. The best is to keep your pad unplugged
from the power socket always while it is not in use.
5. No need to unplug the controller connector from the pad
connection terminal frequently. If the controller always remains
connected to the pad it is OK as this only helps prevent
the connection from loosening. Just remember to verify the
tightness of the connections from time to time, especially if
you sleep on your hot stone mat. If you have to disconnect the
plug of the controller from the pad’s connection terminal always
do this carefully and with both hands. Hold the connector with
one hand while pulling the plug carefully with the other hand.
If pulled by the wire it can break, or the connection may
eventually become loose and the pad will not work correctly.
6. Please take care of your hot stone mat, pad, belt or wrap and
it will be your friend for a long time. It is great for meditation,
sleeping, and sessions, if laying calm on it without a lot of
movement. Never apply pressure or step on it. Dogs and
especially cats adore it and can use but this should be under your
supervision. Do not allow heavy dogs to play in the same room.
Children like to jump but it may be very harmful if they jump
on the pad. There are a lot of tiny electronic parts inside such
as bimetal switches, temperature sensors, etc. Occasional acute
pressure may damage them. In order not to damage the inner
sensors and heating system electronics avoid impact, walking,
standing, training, doing any active exercise on the pad. Do
not allow any heavy or sharp objects to be put on or fall on
it. Never fold it while hot, never heat it in folded condition.
7. Most MediCrystal® mats come folded with the top surface with
crystals upside. But some models of MediCrystal® mats come
folded with crystals inward. Please, always fold the mat for
storage, same as it was folded when you received it. If the mat
is folded in the wrong direction, it may be damaged. Do not
fold it too tightly and never put heavy objects on it.
8. Do not store the mat vertically along the wall. Store the
device in the bag provided. Consider storing the controller and
plug separately so that the sharp edge of the power socket plug
does not damage the mat’s so leather or suede. Do not store
the device in a humid, dusty or oily place. Store it in a clean
ventilated storage room or closet.
®
USER GUIDE
10

MAINTENANCE AND CLEANING
WARRANTY
You will not have to clean your mat, pad, belt, vest or wraps at all If you
cover it with our MediCrystal® Waterproof Cover, or at least a cotton or
bamboo towel all the time.
It will stay clean for a very long time unless you use it uncovered or
spill something on it.
1. Before cleaning, turn o the mat using the button on the controller
and then unplug the device from its power source.
2. Do not use chemical solvents such as benzene or thinner or
aggressive cleaning agents on the controllers and pads with crystals
because it may damage them.
3. Clean it as you would clean any leather or suede product that has
electrical parts inside. Do not wash the mat or controller with water.
Do not put them in a washing machine or dryer.
4. Do not get the mat with crystals wet. But even if occasionally you
spilled something and the mat was not covered with a waterproof
protector, do not worry, it has waterproof layers inside. Just let it
completely dry before using it again. Then test it on high heat for an
hour before laying your body on the belt or hands wrap. Remember
that ironing the device is strictly prohibited.
5. Use only a slightly wet cloth (soap water can be a good choice) to
wipe o dirt and dust. You could also use a vacuum to remove any
dust from the surface of the mat.
6. You may leave your belt or hands wrap with protectors on high heat
for 1 hour each week to completely self-clean and disinfect.
7. To fold the mat of any size including the amethyst micro-mattress
or belt attachment pad and wraps, disconnect the power plug from
the socket, then from the mat, belt or wraps. Aer this fold the mat,
belt or wraps inward. Try not to bend rm mat and belt in unusual
places. Your mat and belt will last longer the less you fold or bend
it. Wraps are more exible and withstand bending better, but extra
care is always necessary while folding it. Try to fold in the same
manner as the item was received.
All new classic mattresses, amethyst or ametyst tourmaline mats of all
sizes including chair mats and belt micro mattress pads are covered for
home use by 2-year limited warranty. The warranty period starts from
the date of purchase.
All new exible mattresses of all sizes including blankets, wraps, as well
as mattresses with magnetic and/or photon functions are covered for
home use by 1-year limited warranty.
This warranty does not cover normal wear and tear, user abuse, physical
impacts or damage, professional or commercial use, and applies to:
• The original owner/purchaser of the product only
• Normal personal or family use of product in a general home/oce
environment.
MediCrystal LLC warrants to the original purchaser that the products
are free of defects in workmanship and materials, during the applicable
warranty period.
Aer the warranty expires, we will still take care of any repairs, at
minimum cost.
Whether the problem is with the product itself or the controller, we will
provide you with a replacement as soon as possible.
Shipping and return shipping are both free for warranty issues.
You can also buy a 5-year extended home use warranty or 2 years
professional use warranty. It costs 50% of the item cost.
To activate warranty or purchase additional one, please, contact us at
[email protected]
LEGAL DISCLAIMER
* Information provided hereby is for reference purposes only and is
not intended to recommend our devices as a drug or as a diagnosis for
any illness or disease condition; nor as a product to eliminate disease
or other medical condition and is not a substitute for professional
medical advice. MediCrystal LLC does not make any medical claims,
real or implied, as to benet of our products, devices and methods. No
MediCrystal® products or statements have been evaluated by the FDA,
nor has the FDA approved these products to diagnose, cure, treat,
mitigate or prevent disease in humans or in pets. FDA registration
of devices manufacturer does not mean that the device is intended
for medical use, treatment of any diseases or medical conditions, or
can be a replacement of doctor’s advice or traditional medical care
and practice. There are contraindications and it is your responsibility
to consult health professional prior to use of MediCrystal® products.
Specic medical advice should be obtained only from a licensed
health care professional. These and all other MediCrystal® products
are non-medical, non-medicinal devices and are not intended to
diagnose, treat, or prevent any disease or condition. All MediCrystal®
products are marketed for consumer home use and the customer
holds ultimate responsibility for any use of the device or information
and for all consequences. MediCrystal LLC assumes no responsibility
for the improper use of and self-diagnosis and/or treatment using
the products. You fully understand that the use of the products and
related information is solely done at your own risk. MediCrystal LLC
does not represent or warrant that these materials are accurate,
complete, current, reliable or error-free. None of MediCrystal LLC
or any of its directors, employees, agents or representatives will be
liable for damages, claims, expenses or other costs including without
limitation legal fees arising out of or in connection with the use of, or
inability to use, any information contained here, in the information,
owner’s guide or websites. This is a comprehensive limitation of
liability that applies to all damages of any kind, including without
limitation compensatory, direct, indirect, and exemplary and all other
damages, income or prot loss or damage to property and claims of
third parties (please, see full text of Legal Disclaimer in MediCrystal®
catalog or on MediCrystal.com website).
MediCrystal® is a registered with USPTO trademark of MediCrystal LLC. All information in this user guide and on websites MediCrystal.com is the
intellectual property provided for customers’ home use only. It cannot be copied, reproduced, posted on the Internet or used in any other manner
without written permission of MediCrystal LLC.
© All rights reserved by MediCrystal LLC 2018.
If your mat is rated for the North American 110-120V voltage and your controller is with the U.S. standard NEMA 5-15P (two-pole with
ground pin) plug, use it only with the step-down 220-250V to 110V voltage converter in the 220-250V 50Hz countries. The maximum
wattage of such converter should be at least 2-3 times higher than the mat’s power consumption. Do not connect the 110-120V mat
into the 220-250V outlet through an adapter. If you plug in a device that isn’t rated for the outlet’s voltage, it may be severely damaged,
and cause re risks!
®
www.MediCrystal.com
11

MEDICRYSTAL LLC
30 N Gould Street, #5304
Sheridan WY 82801, USA
phone [phone]
e-mail: [email protected]
website: www.MediCrystal.com
Please, watch our
educational videos on
Youtube/MediCrystal