MeiTrack MVT100 User manual

File Name:
MEITRACK MVT100 User Guide
Creator:
Cavana Cheung
Project:
MVT100
Creation Date:
Update Date:
2010-09-09
2013-07-22
Sub Project:
User Guide
Page:
- 1 - of 16
Revision:
V5.0
Confidential:
External Documentation
MEITRACK® GPS Vehicle Tracker
User Guide
MVT100
Copyright © 2013 Meitrack Group All rights reserved.
- 1 -

File Name:
MEITRACK MVT100 User Guide
Creator:
Cavana Cheung
Project:
MVT100
Creation Date:
Update Date:
2010-09-09
2013-07-22
Sub Project:
User Guide
Page:
- 2 - of 16
Revision:
V5.0
Confidential:
External Documentation
Contents
1. Copyright and Disclaimer ......................................................................................................................................- 3 -
2. Product Overview ..................................................................................................................................................- 3 -
3. Applications............................................................................................................................................................- 3 -
4. Product Function and Specifications ....................................................................................................................- 3 -
4.1 Product Function............................................................................................................................................- 3 -
4.2 Specifications ...................................................................................................................................................- 4 -
5. MVT100 and Accessories.......................................................................................................................................- 5 -
6. View ........................................................................................................................................................................- 5 -
7. First Use..................................................................................................................................................................- 5 -
7.1 Install SIM Card...............................................................................................................................................- 5 -
7.2 Charging..........................................................................................................................................................- 6 -
7.3 LED Indications ...............................................................................................................................................- 6 -
7.4 Track by Calling...............................................................................................................................................- 7 -
7.4.1 Multiple Phone numbers– A71 ...................................................................................................- 8 -
7.4.2 Sleep Mode – A73 ........................................................................................................................- 8 -
7.4.3 Geo-fence Alarm – B05................................................................................................................- 9 -
7.4.4 Set Anti-theft – B21......................................................................................................................- 9 -
7.4.5 Time Zone– B35 .........................................................................................................................- 10 -
7.5 Configure by Computer................................................................................................................................- 10 -
7.5.1 GPRS Tracking .............................................................................................................................- 12 -
7.5.2 Set Authorized Phone Number/GPRS Event.....................................................................................- 12 -
8. Installation............................................................................................................................................................- 13 -
8.1 Install I/O Cable............................................................................................................................................- 13 -
8.2 Install / Connection Diagram ........................................................................................................................- 14 -
8.2.1 Power/GND (PIN1, PIN2) ...........................................................................................................- 14 -
8.2.2 Digital Input (PIN 3, Negative Triggering)/SOS.........................................................................- 14 -
8.2.3 Digital Input (PIN5, Positive Triggering)....................................................................................- 14 -
8.2.4 Output (PIN7) .............................................................................................................................- 15 -
8.2.5 Formula for Built-in Battery Voltage and Extenal Power Voltage...........................................- 15 -
8.2.6 AD Input (PIN6 Fuel Detection) .................................................................................................- 15 -
8.3 Mount the MVT100 unit..............................................................................................................................- 16 -
Copyright © 2013 Meitrack Group All rights reserved.
- 2 -

File Name:
MEITRACK MVT100 User Guide
Creator:
Cavana Cheung
Project:
MVT100
Creation Date:
Update Date:
2010-09-09
2013-07-22
Sub Project:
User Guide
Page:
- 3 - of 16
Revision:
V5.0
Confidential:
External Documentation
1. Copyright and Disclaimer
Copyright © 2013 MEITRACK. All rights reserve
MEITRACK and are trademarks that belong to Meitrack Group
The user manual may be changed without prior notification.
This user manual, or any part thereof, may not be reproduced for any purpose whatsoever without the written
authorization of Meiligao (MEITRACK), or transmitted in any form, either electronically or mechanically, including
photocopying and recording.
In no event shall Meiligao (MEITRACK) be liable for direct, indirect, special, incidental, or consequential damages
(including but not limited to economic loss, personal injury, and loss of asset and property) arising out of the use
or inability or illegality to use the product or documentation.
2. Product Overview
The MTV100 is a distinct GPS Tracker that can be used with automobiles, motorcycles, yachts and boats. The
MVT100’s unique design makes its appearance both elegant and cool. Once installed on a motorcycle, the product
cannot be easily noticed as a result of its clever design. This product is easy to install and is built with an internal
GPS and GSM antenna. The MVT100 is both waterproof and dust proof, making it an exceptional GPS tracker for
your car, motorcycle, yacht and boat.
3. Applications
Vehicle Real Time Tracking
Car Security/Anti-Hijack
Tracking for Motorcycles, Yachts and Boats
Fleet Management
4. Product Function and Specifications
4.1 Product Function
U-blox 6 GPS and Quad Band GSM 850/900/1800/1900Mhz
AGPS ( with GSM Base Station ID)
Waterproof (IP66)
Inbuilt GPS and GSM Antenna
Track by SMS/GPRS (TCP/UDP) (MEITRACK Protocol)
Copyright © 2013 Meitrack Group All rights reserved.
- 3 -

File Name:
MEITRACK MVT100 User Guide
Creator:
Cavana Cheung
Project:
MVT100
Creation Date:
Update Date:
2010-09-09
2013-07-22
Sub Project:
User Guide
Page:
- 4 - of 16
Revision:
V5.0
Confidential:
External Documentation
Track on Demand
Track by Time Interval
Track by Distance Interval
Track on Mobile Phone
Internal 8Mb Memory for Logging
Inbuilt Motion Sensor
850mAh Internal Backup Battery
SOS Alarm
Polygon Geo-fence Alarm
GPS Blind Area Alarm
Low Battery Alarm
Speeding Alarm
Tow Alarm
External Power Cut Alarm
Mileage Report
Engine Cut (Engine immobilization)
Inbuilt Super Magnet (optional)
OTA
I/O: 2 Digital Input (1 negative triggering and 1 positive triggering), 1 Analog Input Detection, 1 Output
4.2 Specifications
Items Specifications
Dimension 110x72x39mm
Weight 170g
Input Voltage DC 11V~36V/1.5A
Back-up Battery 850mAh/3.7V
Power consumption 65mA standby current
Operating
Temperature
-20 ℃~55℃
Humidity 5%~95%
Work Time 43 hours in power-saving mode and 10 hours in normal mode
LED 2 LED lights to show GPS, GSM and other status
Button 1 SOS and 1 power on/off
Microphone None
Memory 8M Byte
Sensor Motion Sensor
GSM Frequency GSM 850/900/1800/1900MHz
GPS Chip Latest U-blox 6 GPS chipset, 50 channels all-in-view tracking
GPS Sensitivity -161dB
Positioning Accuracy 10 meters, 2D RMS
Copyright © 2013 Meitrack Group All rights reserved.
- 4 -

File Name:
MEITRACK MVT100 User Guide
Creator:
Cavana Cheung
Project:
MVT100
Creation Date:
Update Date:
2010-09-09
2013-07-22
Sub Project:
User Guide
Page:
- 5 - of 16
Revision:
V5.0
Confidential:
External Documentation
I/O 2 Digital Input (1 negative triggering and 1 positive triggering)
1 Analog Input Detection
1 Output
1 USB port for configuration only
5. MVT100 and Accessories
MVT100 with SOS Button
Battery and I/O Cable
3M Sticker Screws USB Data Cable CD
6. View
7. First Use
7.1 Install SIM Card
Check that the SIM has not run out of credit (test the SIM in a phone to make sure it can send and receive SMS);
Check that the SIM Lock code is turned off;
If you require the function of sending an SMS location report to the authorized phone number when it makes a
call to the MVT100, please make sure the SIM installed supports displaying caller ID.
Before installing the SIM card, turn off the power for MVT100.
USB Por t
SOS Button
Main Unit
I/O
Copyright © 2013 Meitrack Group All rights reserved.
- 5 -

File Name:
MEITRACK MVT100 User Guide
Creator:
Cavana Cheung
Project:
MVT100
Creation Date:
Update Date:
2010-09-09
2013-07-22
Sub Project:
User Guide
Page:
- 6 - of 16
Revision:
V5.0
Confidential:
External Documentation
Unscrew and remove cover.
Insert the SIM card by sliding it into the card holder with the chip module facing to the connectors on PCB.
Replace the cover and screw it up.
7.2 Charging
Please connect GND (-Black) and Power (+Red) wires to 12V or 24 external power and make sure to charge the
battery for at least 3 hours.8 hours is highly appreciated.
Configuration and testing suggested prior to installation.
7.3 LED Indications
There are two methods to turn on/off MVT100: press and hold the Power On/Off button for 3~5 seconds, or
connect with external power 11~36V.
GPS LED (Blue)
On One button is pressed or input is active.
Flashing ( every 0.1 second) Initializing or back-up battery power is low
Flashing (0.1 second on and 2.9 seconds off) MVT100 has a GPS fix
Flashing (1 second on and 2 seconds off) MVT100 has no GPS fix
GSM LED (Green)
On A call is coming in / a call is being made
Flashing ( every 0.1 second) Initializing
Flashing (0.1 second on and 2.9 seconds off) MVT100 is connected to the GSM network
Flashing (1 second on and 2 seconds off) MVT100 is not connected to the GSM network
Copyright © 2013 Meitrack Group All rights reserved.
- 6 -

File Name:
MEITRACK MVT100 User Guide
Creator:
Cavana Cheung
Project:
MVT100
Creation Date:
Update Date:
2010-09-09
2013-07-22
Sub Project:
User Guide
Page:
- 7 - of 16
Revision:
V5.0
Confidential:
External Documentation
7.4 Track by Calling
Make a call to MVT100 and it will report with one SMS.
For example,
Now,110727 02:48,V,16,23Km/h,61%,http://maps.google.com/maps?f=q&hl=en&q=22.540103,114.082329
&ie=UTF8&z=16&iwloc=addr&om=1
Click on the link then the location can be shown directly on Google Maps on your mobile phone.
Report description:
Now,110727 02:48,V,16,23Km/h,61%,http://maps.google.com/maps?f=q&hl=en&q=22.540103,114.082329
&ie=UTF8&z=16&iwloc=addr&om=1
Content Description Note
Now Current Location Alarm Type
110721 16:40 Date & Time: 21 July, 2011, 16:40pm Date & Time in YYMMDD HH:MM
V No GPS fixed GPS Status Indicator:
A = valid, V = invalid
10 GSM signal=10 GSM Signal. Decimal Digit (0~31)
0Km/h Speed=0 KM/h. Decimal digit
97% Battery Power: 97% Battery Power Balance (Percentage)
http://maps.google.c
om/maps?f=q&hl=en
&q=22.540103,114.0
82329&ie=UTF8&z=1
6&iwloc=addr&om=1
Latitude: 22.513015
Longitude: 114.057235
Google Maps Web Link with Latitude and
Longitude. Click on the link to get the
location.
If your mobile cannot visit HTTP websites, enter the latitude and longitude into Google Maps as the following
picture shows to get the position:
Copyright © 2013 Meitrack Group All rights reserved.
- 7 -

File Name:
MEITRACK MVT100 User Guide
Creator:
Cavana Cheung
Project:
MVT100
Creation Date:
Update Date:
2010-09-09
2013-07-22
Sub Project:
User Guide
Page:
- 8 - of 16
Revision:
V5.0
Confidential:
External Documentation
More SMS commands
You can configure MVT100 by mobile phone or by computer using the MEITRACK Manager.
For more details, please refer to part 7.5 Configure by Computer.
Note:
1. Password is 4 digits only and defaulted as 0000. You can change the password by Meitrack Manager and SMS
command.
2. MVT100 will only accept commands from a user with the correct password and report SMS report to the user.
If preauthorized phone number was set, only this phone number can preset SMS reports.
7.4.1 Multiple Phone numbers– A71
Command: 0000, A71, phone number 1, phone number 2, phone number 3
SMS Get: IMEI, A71, OK
Note：
Authorize a phone number for SOS alarm, calling for location report, geo-fence alarm, and low battery alarm.
Phone Number: Max 16 characters.
If no preset phone number, it is empty (default is empty).
Send command “0000, A71” to delete all phone numbers.
When the SOS button is pressed, MVT100 will make a call to phone number 1, 2 and 3. It will stop calling when
one number answers.
Example: 0000,A71,13811111111,13822222222,13833333333
SMS Get: 353358017784062,A71,OK
7.4.2 Sleep Mode – A73
Command: 0000,A73,X
SMS Get: IMEI,A73,OK
Note:
Copyright © 2013 Meitrack Group All rights reserved.
- 8 -

File Name:
MEITRACK MVT100 User Guide
Creator:
Cavana Cheung
Project:
MVT100
Creation Date:
Update Date:
2010-09-09
2013-07-22
Sub Project:
User Guide
Page:
- 9 - of 16
Revision:
V5.0
Confidential:
External Documentation
This setting is for power saving.
X=0, turn off sleep mode (default)
X=1, normal sleep. GSM module work, GPS module work by sleep mode intermittently. The device can work 25%
longer than no sleep mode. Note: this is not recommended for users who set “track by interval” or short time
interval, because it will affect the completeness of tracking.
X=2, deep sleep, the tracker will enter this mode after it is inactive or stationary(No SOS/any triggered by the
button/input/incoming calls/message/movement) for 5 minutes. GPS module stops working and GSM module
enters sleep mode. The tracker remains in this mode until it is activated by SOS/any triggered by the
button/input/incoming calls/message/movement. After that, it will repeat above processes.
Note: In any condition, the device will directly quit the sleep mode and back to normal working mode by SMS or
GPRS command to turn off the sleep mode.
Example: 0000,A73,2
SMS Get: 353358017784062,A73,OK
7.4.3 Geo-fence Alarm – B05
Command: B05,P,latitude,longitude,radius,in,out
SMS Get: IMEI,B05,OK
Note:
P: 1 to 8. Max 8 Geo-fence waypoints can be set.
Latitude: Latitude in decimal degrees of the waypoint center.
Longitude: Longitude in decimal degrees of the waypoint center.
Radius: [1, 4294967295] in meters.
In = 0, turn off the alarm when the tracker enters the waypoint;
In = 1, turn on the alarm when the tracker enters the waypoint.
Out = 0, turn off the alarm when the tracker exits the waypoint;
Out = 1, turn on the alarm when the tracker exits the waypoint.
Example: 0000,B05,1,22.91319,114.07988,1000,0,1
SMS Get: 353358017784062,B05,OK
Once the tracker goes outside of the circle (center: 22.91319,114.07988 and radius 1000 meters), the following
message will be received.
353358017784062,ExitGEO,22.918186,114.089823,080229123816,A,10,22,16,32,1,21,6667,850,,0000,,
7.4.4 Set Anti-theft – B21
Command: 0000,B21,Status
SMS Get: IMEI,B21,OK
Note:
Status=1, turn on Anti-theft (default); the device alarms when input 2 (positive input) is active;
Status=0, turn off Anti-theft; the device doesn’t alarm when input 2 (positive input) is active.
Copyright © 2013 Meitrack Group All rights reserved.
- 9 -

File Name:
MEITRACK MVT100 User Guide
Creator:
Cavana Cheung
Project:
MVT100
Creation Date:
Update Date:
2010-09-09
2013-07-22
Sub Project:
User Guide
Page:
- 10 - of 16
Revision:
V5.0
Confidential:
External Documentation
7.4.5 Time Zone– B35
Command: 0000,B35,T
SMS Get: IMEI,B35,OK
Note:
Default time of the tracker is GMT. You can use this command to change the time on your tracker to your local
time. This command is for SMS tracking only.
Time zone of SMS report is separated with that of GPRS data. If you need to set time zone in GPRS data, please
use SMS command: 0000, B36, T
T=0, to turn off this function.
T=[-32768,32767] to set time difference in minutes to GMT.
For those ahead of GMT, just input the time difference in minutes directly. For example, GMT+8,
W000000,032,480
‘-‘is required for those behind GMT. For example, W000000,032,-120.
Example: 0000,B35,480
SMS Get: 353358017784062,B35,OK
For more details regarding SMS commands, please refer to MEITRACK SMS Protocol.
7.5 Configure by Computer
The following shows you how to configure MVT100 with MEITRACK Manager.
Please refer to the MEITRACK Manager User Guide for more details on MEITRACK Manager.
Step 1. Install the USB driver and Meitrack Manager in advance.
Step 2. Connect MVT100 to PC with the USB cable.
Methods of confirming if USB Driver is installed: Run Device Manager (right-click “My Computer” –“Manage”
–“Computer Management”- “Device Manager ” )
Click “Port(COM and LPT)”, and find “Prolific USB-to-Serial Comm Port”, if there is no “Prolific USB-to-Serial Comm
Port”, please re-install the USB driver ( please refer to the MEITRACK Manager User Guide for detailed guidance).
Copyright © 2013 Meitrack Group All rights reserved.
- 10 -

File Name:
MEITRACK MVT100 User Guide
Creator:
Cavana Cheung
Project:
MVT100
Creation Date:
Update Date:
2010-09-09
2013-07-22
Sub Project:
User Guide
Page:
- 11 - of 16
Revision:
V5.0
Confidential:
External Documentation
Run MEITRACK Manager, turn on the device and connect PC and it with USB cable, Meitrack Manager will
automatically detect port and model, and enter into the main interface as follow:
Note: MEITRACK Manager is in the CD. The language will be automatically adjusted to the same language as your
PC’s operation system. Please use “Ctrl+L” to change the language.
Copyright © 2013 Meitrack Group All rights reserved.
- 11 -

File Name:
MEITRACK MVT100 User Guide
Creator:
Cavana Cheung
Project:
MVT100
Creation Date:
Update Date:
2010-09-09
2013-07-22
Sub Project:
User Guide
Page:
- 12 - of 16
Revision:
V5.0
Confidential:
External Documentation
7.5.1 GPRS Tracking
Select Column 2 Trac king to set SMS tracking & monitoring phone number and GPRS parameters, such as Server IP,
and Port (IP/Domain: 67.203.13.26, Port: 8800), APN, Time Interval, etc.
Please refer to the MEITRACK Manager User Guide for more detailed information regarding configuration and
functions.
7.5.2 Set Authorized Phone Number/GPRS Event
Select Column 4 Authorize: to set authorized phone number, event, etc.
Please refer to the MEITRACK Manager User Guide for more detailed information regarding configuration and
functions.
Copyright © 2013 Meitrack Group All rights reserved.
- 12 -

File Name:
MEITRACK MVT100 User Guide
Creator:
Cavana Cheung
Project:
MVT100
Creation Date:
Update Date:
2010-09-09
2013-07-22
Sub Project:
User Guide
Page:
- 13 - of 16
Revision:
V5.0
Confidential:
External Documentation
For more information about GPRS settings, please refer to MEITRACK SMS/GPRS Protocol.
8. Installation
8.1 Install I/O Cable
The I/O cable is a 8-pin cable including power, analog input, negative input, output and USB port for
configuration.
1
Power(+)
2
GND(-)
3
GND(-)
4
Input1(-)
5
Input2(+)
6
AD1
7
Out1
8 9 10
USB Port
PIN Color Description
1 Power Red DC In (power source). Input voltage: 9V~36V. 12V suggested.
Copyright © 2013 Meitrack Group All rights reserved.
- 13 -

File Name:
MEITRACK MVT100 User Guide
Creator:
Cavana Cheung
Project:
MVT100
Creation Date:
Update Date:
2010-09-09
2013-07-22
Sub Project:
User Guide
Page:
- 14 - of 16
Revision:
V5.0
Confidential:
External Documentation
2 GND Black Ground
3 GND Black Ground, for connecting with temperature/fuel sensor etc.
4 Input1 White Digital Input (negative triggering). Socket for SOS panic button.
It also can be used for detecting the status of vehicle door.
Vehicles from China, Korea, Japan are normally negative triggering.
5 Input2 Purple Digital Input2 (positive triggering). It can be used for detecting ACC,
and the status of vehicle door. Vehicles from Europe, America are
normally positive triggering.
6 AD Blue 12 Bits resolution analog input. 0~6.6V DC detection.
It can be used to connect with fuel sensor etc.
7 Out Yellow Outpu
t. Low voltage (0V) when effective and open drain when
ineffective.
Output open drain sink voltage (ineffective): 45V max.
Output low voltage sink current (effective): 200mA max.
It can be used to connect with relay for engine immobilization.
8/9/10 USB Port
(For Configuration Only)
Green TTL232 Rx (MVT100 Tx)
Orange TTL232 Tx (MVT100 Rx)
Black Ground
8.2 Install / Connection Diagram
8.2.1 Power/GND (PIN1, PIN2)
Connect GND (-Black) and Power (+Red) wires to the battery of motorcycle/vehicle.
8.2.2 Digital Input (PIN 3, Negative Triggering)/SOS
8.2.3 Digital Input (PIN5, Positive Triggering)
Copyright © 2013 Meitrack Group All rights reserved.
- 14 -

File Name:
MEITRACK MVT100 User Guide
Creator:
Cavana Cheung
Project:
MVT100
Creation Date:
Update Date:
2010-09-09
2013-07-22
Sub Project:
User Guide
Page:
- 15 - of 16
Revision:
V5.0
Confidential:
External Documentation
8.2.4 Output (PIN7)
8.2.5 Formula for Built-in Battery Voltage and Extenal Power Voltage
Built-in Battery Voltage = (AD4*3.3*2)/4096
Batter Percentage = ((AD4-2114)*100/492)*100%
Extenal Power Voltage = AD5/4096*3.3*16
8.2.6 AD Input (PIN6 Fuel Detection)
Note:
Fuel sensor A53 supplied by our company is resistance-type sensor, it works by external p o w e r.
3 cables of fuel sensor: Power Cable (Brown), GND Cable (Blue), Data Input Cable (Yellow). Power cable (DC
11V-36V), connects with device power cable (0-5V). Please see above.
Formula of AD Analog Input:
Input Voltage = (AD1*3.3*2)/4096
0x0C9B=>3227(Decimal)=>(3227*3.3*2)/4096=5.1997V(Voltage)
0x0D9D=>3845(Decimal)=>(3845*3.3*2)/4096=5.6154V(Voltage)
Formula of Remaining Fuel (Percentage)
Remaining Fuel = AD1*6.6/20480*100%
Copyright © 2013 Meitrack Group All rights reserved.
- 15 -

File Name:
MEITRACK MVT100 User Guide
Creator:
Cavana Cheung
Project:
MVT100
Creation Date:
Update Date:
2010-09-09
2013-07-22
Sub Project:
User Guide
Page:
- 16 - of 16
Revision:
V5.0
Confidential:
External Documentation
Note: in GPRS data, the value of fuel sensor is in hexadecimal, need to convert the hexadecimal value to
decimal first, and then use the formula above. For example, 0x040D, decimal 787, remaining fuel is 33.41%.
8.3 Mount the MVT100 unit
Three mounting options:
Option 1:
Using 3M sticker
Option 2:
Using Screws
Option 3:
Using internal super magnet
Please do not hesitate to email us at [e-mail] if you have any questions.
Copyright © 2013 Meitrack Group All rights reserved.
- 16 -