Members Mark 9V304V60 User manual

TM
Bathroom Double Sink Vanity
Model Number: 9V304V60
THIS ASSEMBLY MANUAL CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Assembly Manual

Do not place vanity in direct sunlight and keep vanity at least 60 cm / 2 ft from
heat sources to avoid fading.
Sink should only be cleaned with a non-abrasive cleaner and a soft, damp cloth.
Countertop spills should be cleaned up immediately with a soft cloth, and warm
water. Be careful not to spill or use any acidic or caustic substances or any
petroleum-based product.
NOTICE: It is suggested that this product be installed by a professional and be
permanently attached to the wall. Not intended to be a free-standing unit.
Remove all parts and hardware from the box. Place all items on a carpeted or
scratch-free work surface, as this will avoid damaging parts during assembly.
The shipping box provides an ideal work surface.
To avoid accidentally discarding small parts or hardware, do not dispose of any
packaging or contents of the shipping carton until assembly is complete.
Use the parts and hardware lists below to identify and separate each of the
pieces included.
The use of power tools for assembly is not recommended. Power tools can
damage the hardware and/or split the wood.
Before Assembly
Care and Cleaning
Important Safety Information
Please read all instructions carefully before assembling this vanity.
For your safety, installation by two or more adults is strongly recommended.
Use only vendor-supplied hardware to assemble this item. Using unauthorized
hardware could jeopardize the structural integrity of the item.
It is recommend to dust frequently with a clean, soft, dry, lint-free cloth. Clean the
surface by rubbing in the direction of the grain.
It is recommend to polish your vanity approximately every six months, using a clean,
soft, lint-free cloth and rubbing the polish in the direction of the grain.
Lift and place objects rather than dragging them across the vanity surface.

(AA)
Adjustable
Leveler
Qty: 4
(CC)
Touch-up
Pen
Qty: 1
(BB)
Shelf Pin
Qty: 8
A................Vanity Base................1
B................Backsplash.................1
C........Left Adjustable Shelf.........1
D.......Right Adjustable Shelf........1
Components
Hardware
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
(A)
(B)
(C)
(D)
NOTICE: It is suggested that this product be installed by a professional and be
permanently attached to the wall. Not intended to be a free-standing unit.

(AA)
Adjustable
Leveler
Qty: 4
NOTICE: It is suggested that this product be installed by a professional and be
permanently attached to the wall. Not intended to be a free-standing unit.
Adjustable
Wall
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
Step 1
All 4 corner feet underneath the vanity, have Levelers (AA). To adjust, screw in or out
Leveler (AA) using your hands.
(AA)
(A)

G1............Bracket............1
G2...........Tie Wrap...........1
G3........Long Screw.........1
G4........Short Screw.........1
Remove anti-tipping pack from back
Panel, assemble it to avoid tipping.
Wall
Wall G2
G1
G4
G3
(A)
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
Step 2: Anti-Tip

Wall
Back Splash
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
(B)
(B)
Backsplash
Qty: 1
Step 3
For application of backsplash (B) to drywall: Make sure the wall is smooth and flat.
Clean the wall and the back of the backsplash (B) with damp cloth to remove any
grease or debris. Apply thin-set adhesive, and then set the backsplash (B).
(A)
Vanity
Qty: 1

(C)
(BB)
(BB)
(D)
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
(BB)
Shelf Pin
Qty: 8
(C)
Left
Adjustable Shelf
Qty: 1
(D)
Right
Adjustable Shelf
Qty: 1
Reposition the Shelf Pin into the desired position.
Place the Adjustable Shelf back onto the Shelf Pin.
Step 4
(A)
(B)

1: To adjust door left or right.
1:
2:
3:
2: To adjust door forward or backward.
3: To adjust door up or down.
Uneven floor may cause doors to misalign. Please place furniture
on a leveled flat surface or adjust the levelers at the bottom
toensure that it is perfectly leveled.
If necessary, you can also adjust the doors with a Philips
screwdriver when the below adjustable hinge is installed on your
furniture.
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
Step 5

Need Assistance? Visit us at: samsclub.com/membersmarkhelp
Step 6: Drawer Removal

Need Assistance? Visit us at: samsclub.com/membersmarkhelp
Step 7: Drawer Install