Members Mark Avondale ADW00600-7HC Owner's manual

THIS ASSEMBLY MANUAL CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Assembly Instructions & User's Manual
for
Members Mark Avondale 7pc Sling Dining Set
Item Number:
Model Number: ADW00600-7HC
Customer Assistance : 1-800-416-3511
or Email: [email protected]
(spare/replacement parts)
Page 1
Need Assistance? Visit us at: samsclub.com/membersmarkhelp

Need Assistance? Visit us at: samsclub.com/membersmarkhelp
Page 2
Table of Contents
Quality Statement.............................................................3
Important Safety Information.............................................3
Before Assembly..............................................................3
Package Contents............................................................4
Product Information..........................................................5
Care & Use and Storage Instructions..................................12
Warranty Information........................................................12
Dining Chair
Components...............................................................6
Hardware...................................................................6
Tools..........................................................................6
Step1-Step4............................................................7-8
Dining Table
Components................................................................9
Hardware....................................................................9
Tools...........................................................................9
Step1-Step4..........................................................10-11

Before Assembly
Important Safety Information
Please read all instructions carefully before assembling this furniture.
For your safety, assembly by two or more adults is strongly recommended.
Use only vendor-supplied hardware to assemble this item. Using unauthorized
hardware could jeopardize the structural integrity of the item.
Hardware may loosen overtime. Periodically check that all connections are tight.
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
Page 3
Quality Statement
Remove all parts and hardware from the box. Place all items on a carpeted or
scratch-free work surface, as this will avoid damaging parts during assembly.
The shipping box can provide an ideal work surface if none is available.
Use the components and hardware lists below to identify, inventory and
separate each of the hardware and components included.
To avoid accidentally discarding small components or hardware, do not dispose
of any packaging or contents of the shipping carton until assembly is complete.
DO NOT USE power tools unless it is explicitly identified in this manual as
required for use during assembly. Power tools can damage the fasteners,
hardware and/or components.
Do not fully tighten all fasteners / screws until all parts are in place. Failure to
follow these instructions may cause the fasteners / screws to misalign during
assembly.

Need Assistance? Visit us at: samsclub.com/membersmarkhelp
1Set / 3Ctn
Box1of3：
Box2of3：
Component QuantityDescription
A
B
Dining Chair 6
Component QuantityDescription
A
B
1
A B
Page 4
Package Contents
A
1
Furniture Cover
Box3of3：
Component QuantityDescription
A1
Table Top
A B
Leg Connector
Bracket
Table Leg 2

Need Assistance? Visit us at: samsclub.com/membersmarkhelp
ALW05530
Table
Page 5
Product information
Dining Chair
A
38.25" W *83.75" D *28.75" H
A
ADW00600 25.5" W *29.75" D *42.25" H 250lb per seat
FC0607
Description DimensionsPart No. Weight
Capacity
Factory
Assembly
A.Foot Cap
N/A N/A Y
N
FC0613
Description DimensionsPart No. Weight
Capacity
Factory
Assembly
A.Foot Cap
N/A N/A Y
NN/A
Description Part No.
ZZW04512
Furniture Cover

(H3)
HEX BOLT DRIVER
Qty: 1
PART NO:HW0006
Components
Hardware
A.
Part No.AN0806
Qty 1
CHAIR FRAME B
Part No.
Qty 1
.
AN0807
LEFT ARM
Tools
Page 6
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
(H1)
1/4"X20MMBOLT
Qty: 10
PART NO:HW0802
(H2)
.5 X 1.0 MM WASHER
HW0004
Qty: 10
Ø6
PART NO:
C. RIGH
AN0808Part No.
Qty 1
TARM
D SUPPORT BAR.
Part No.
Qty 1
AN0809

Step 1
Step 2
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
Step1-Step4
Page 7
(H1)
1/4"X20MMBOLT
Qty: 8
(H2)
Qty: 8
Ø6.5 X 1.0 MM WASHER
Hand tighten only 2-3 turns.
H1 H2
H2
H1
(H1)
1/4"X20MMBOLT
Qty: 2
(H2)
Qty: 2
Ø6.5 X 1.0 MM WASHER
Hand tighten only
2-3 turns.
H1 H2
2x
If you have difficulty to line up the holes
between chair frame and both arms,
please loosen the bolts of crossbars
under the chair frame by 2-3 turns.
2x

2x
H3
4x
2x
NOTE: Bolts must be FULLY tightened.
2x
2x
2x
(H3)
Qty: 1
HEX BOLT DRIVER
Step 3
Step 4
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
Page 8

Components
Hardware
A.
Part No.
Qty 1
TABLE TOP
AT73380
B
Part No.
Qty 1
.LEG CONNECTOR BRACKET
AT73382
C.
Part No.
Qty 2
TABLE LEG
AT73381
Tools
(H6)
HEX BOLT DRIVER
Qty:
PART NO:HW0006
1
Page 9
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
(H1)
1/4"X20MMBOLT
Qty:
PART NO:HW0802
6
(H3)
Qty:
Ø6.5 X 1.0 MM WASHER
PART NO:HW0004
6
(H2)
1/4"X45MMBOLT
Qty:
PART NO:HW0805
4
(H4)
Qty:
Ø20 X Ø6.5 X 2.0 MM WASHER
PART NO:HW0594
4
(H5)
UMBRELLA HOLE COVER
Qty: 1
PART NO:G0380

Hand tighten only 2-3 turns.
(H4)
Qty:
Ø20XØ6.5X2.0MM
WASHER
4
(H2)
1/4"X45MMBOLT
Qty: 4
H2
H4
H3 H1
H3
H1
Hand tighten only 2-3 turns.
Step 1
Step 2
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
Step1-Step4
Page 10
(H1)
1/4"X20MMBOLT
Qty: 6
(H3)
Qty:
Ø6.5 X 1.0 MM WASHER
6

NOTE: Bolts must be FULLY tightened.
4x
H6
4x
2x
2x
(H6)
Qty: 1
HEX BOLT DRIVER
Step 3
Step 4
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
Page 11
H6
H6

CARE AND MAINTENANCE
SPECIAL WARNINGS!!!
FRAMES
FABRICS (CUSHIONS/SLINGS)
STRAPS
UMBRELLA USAGE WARNING!
Cleaning
Maintenance
Cleaning -
Maintenance
Cleaning -
Maintenance -
- Use mild soap and warm water. Do not use abrasive materials, cleansers or bleach products.
Rinse with clean water and dry thoroughly.
- Periodically clean and dry thoroughly. Be sure to drain any water accumulated inside the
frames. To thoroughly drain frames, remove foot caps and tilt the frames, if necessary, to remove all water.
This is critical. Water allowed to accumulate inside the frames and then exposed to sub-freezing
temperatures can cause damage to the frame tubing. Always clean, drain and dry thoroughly before storing
for the winter. For best results, always store or cover your furniture when not in use. We recommend
commercially available outdoor furniture covers. Any small nicks or scratches can be covered with a light
application of touch-up paint.
** When cleaning or moving large or heavy items, always have two people work together. Never drag
furniture.
Wipe minor spills immediately. Clean with mild soap, warm clean water and soft cloth. Do not
use abrasive materials, cleansers or bleach products. Although fabric has been treated to resist stains,
occasional use of commercially available fabric cleaners may be necessary. Follow manufacturer's
instructions.
- The best way to maintain the beauty of cushions and slings is to store them in a dry area and
out of the elements when not in use or cover with commercially available outdoor furniture covers.
Furniture covers are a great way to protect your set from harsh elements of weather and UV light.
However, it is important to ensure furniture and covers are free of moisture and debris before covering. It is
also necessary to promptly uncover furniture after rain and during periods of high humidity to prevent
moisture build up. Failure to do so can lead to permanent surface and finish damage.
Wash frequently with mild soap, warm water and a soft cloth. Rinse thoroughly with warm, clean
water. Do not use abrasive materials, cleansers or bleach products.
Periodic application of commercially available vinyl cleaners and vinyl protectors will
enhance the look and prolong the life of straps. If your strap chair has cushions, make sure any vinyl
protectors applied are completely dry before placing cushion back on the chair.
If you will be using an umbrella with your table, make sure the plastic umbrella ring is inserted into the hole
in the center of the table. Place the umbrella through the opening and into an umbrella stand made of cast
iron, wrought iron, steel plate or blow molded plastic filled with 20-50 lbs or 9-22 kgs of sand or water. If
your table is 72" or 182 cm or larger, we recommend a weight of at least 50 lbs or 22 kgs or more. NEVER
USE AN UMBRELLA WITH A TABLE WITHOUT USING AN UMBRELLA BASE OR RING AS DESCRIBED
ABOVE. ALWAYS REMOVE YOUR UMBRELLA FROM THE TABLE WHEN NOT IN USE. NEVER USE
AN UMBRELLA DURING STORMS OR WINDY CONDITIONS.
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
Care & Use Instructions
Warranty Information
This product component has a 5 year guarantee against defects in material and/or workmanship. If
you have any questions regarding the warranty or spare / replacement parts, please call our toll-
free number 1-800-416-3511 or email us at [email protected]
NOTE: Please consider recycling all applicable packaging material.
Page 12

Distributed by Sam's West Inc.
2101 SE Simple Savings Dr.
Bentonville, Arkansas 72716-0745
Made in China
Page 13
Need Assistance? Visit us at: samsclub.com/membersmarkhelp