Members Mark 20801B Owner's manual

for
Item Number: 990116614
Model Number: 20801B
Customer Assistance (spare/replacement parts): 1- [phone]
or Email: [e-mail]
Assembly Instructions & User’s Manual
Member’s Mark 2-Door Tall Storage Cabinet
THIS ASSEMBLY MANUAL CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
1 page

·Table of Contents
Quality Statement
……………………………………………………………………………..
3
Important Safety Information
…………………………………………………………………………………
3
Before Assembly
……………………………………………………………………………………
3
Care & Use
……………………………………………………………………………………………..
3
Package Contents
………………………………………………………………………………
4
Package Contents
………………………………………………………………………………
5
Package Contents
………………………………………………………………………………
6
Product Information
……………………………………………………………………………………………….
7
Components
…………………………………………………………………………………….
8
Components
…………………………………………………………………………………….
9
Components
…………………………………………………………………………………….
9
Hardware
………………………………………………………………………………………………..
10
Tools
……………………………………………………………………………………………………….
10
Step 1 – Step 3
…………………………………………………………………………………………….
11
Step 4 – Step 7
…………………………………………………………………………………………….
12
Step 8 – Step 10
…………………………………………………………………………………………….
13
Step 11 – Step 13
…………………………………………………………………………………………….
14
Step 14 – Step 15
…………………………………………………………………………………………….
15
Caution
………………………………………………………………………………………..
16
Troubleshooting
……………………………………………………………………………………………….
16
Care & Use and Storage Instructions
…………………………………………………………………………………………
16
Warranty Information
………………………………………………………………………………...
16
2 page

·
Quality Statement
·
Important Safety Information
Please read all instructions carefully before assembling this product.
Hardware may loosen overtime. Periodically check that all connections are tight.
Where applicable, and for your safety, assembly by two adults is strongly
recommended.
Use only vendor-supplied hardware to assemble this item. Using unauthorized
hardware could jeopardize the structural integrity of the item.
·
Before Assembly
The shipping box can provide an ideal work surface if none is available.
·
Care & Use
Use a soft, clean cloth that will not scratch the surface when cleaning.
Remove all parts and hardware from the box. Place all items on a carpeted or
scratch-free work surface, as this will avoid damaging parts during assembly.
To avoid accidentally discarding small components or hardware, do not dispose
of any packaging or contents of the shipping carton until assembly is complete.
DO NOT USE power tools unless it is explicitly identified in this manual
as required for use during assembly. Power tools can damage the fasteners,
hardware and/or components.
Do not fully tighten all fasteners / screws until all parts are in place. Failure to
follow these instructions may cause the fasteners / screws to misalign during
assembly.
Use the components and hardware lists below to identify, inventory and separate
each of the hardware and components included.
3 page

4 page
·
Package Contents Includes Engineered
Nylon Anchors for
quick assembly
#63
#54
#17
A
B
#17
4 page

“Quick assembly”
#63
5 page
Includes
Engineered Nylon
Anchors for quick

(#2-A) Right Side Panel
(#1-A) Left Side Panel
(#6-A) Left Door (#7-A) Right Door
#53
6 page

·
Contents
Component Quantity
（pcs) Component Quantity （pcs)
(#1-A1) 1 (A) Left Foot Frame 2
(#1-A2) 1 (B) Right Foot Frame 2
(#1-A3) 2 (#19) Handle 2
(#2-A1) 1 (#21) Screwdriver 1
(#2-A2) 1 (#22) Key 2
(#3) 1 (#23) Magnet 2
(#4) 1 (#25) Wrench 1
(#5) 3 (#34) Hook 12
(#6-A1) 1 (#17) Screw D (M8x18L) 12
(#6-A2) 1 (#41) Screw F (M4 x 8L) 82
(#6-A3) 2 (#42) Screw G (M4 x 30L) 12
(#7-A1) 1 (#52) Screw K (M5 x 10L) 8
(#7-A2) 1 (#53) Screw L (M4 x 6L) 1
(#7-A3) 1 (#54) Screw N (M4 x 10L) 36
(#8) 1 (#55) Screw M (M6 x 50L) 2
(#9) 2 (#55-A) Wall Anchor 2
(#10) 1 (#27) WASHER (M4) 2
(#6-1) 4 (#27-B) WASHER (M8) 2
(#15-2) 2 (#60) Mounting Strap 2
(#16-2) 2 (#61) Screw O (M4 x 12L) 2
(#17-2) Middle Corner Protection 2 (#63) Engineered Nylon Anchor 5
·
Product Information
Product Dimensions : 30” x 18” x 72” (76.2cm x 45.72cm x 1.83m)
Product Weight Capacity : Supports up to 600 lbs. (272.2 kg.)
Right Side - Upper Panel
Description Description
Left Side - Upper Panel
Left Side - Bottom Panel
Side Panel Reinforcement
Connection Part
Middle Back Panel
Right Side - Bottom Panel
Top Panel
Bottom Panel
Middle Shelf
Left Door - Upper Panel
Left Door - Bottom Panel
Bottom Back Panel
Leveling Feet
Corner Protection-A
Corner Protection - B
Door Panel Connection Part
Right Door - Upper Panel
Right Door - Bottom Panel
Key Rod
Upper Back Panel
7 page

·
Components
Left Side - Upper Panel
Part No. (#1-A1)
Qty : 1 pc
Left Side - Bottom Panel
Part No.(#1-A2)
Qty : 1 pc
Side Panel Reinforcement Connection Part
Part No. (#1-A3)
Qty : 2 pcs
Right Side - Upper Panel
Part No. (#2-A1)
Qty : 1 pc
Right Side - Bottom Panel
Part No. (#2-A2)
Qty : 1 pc
Top Panel
Part No. (#3)
Qty : 1 pc
Right Door - Bottom Panel
Part No. (#7-A2)
Qty : 1 pc
Key Rod
Part No. (#7-A3)
Qty : 1 pc
Upper Back Panel
Part No. (#8)
Qty : 1 pc
Left Door - Bottom Panel
Part No.(#6-A2)
Qty : 1 pc
Door Panel Connection Part
Part No.(#6-A3)
Qty : 2 pcs
Right Door - Upper Panel
Part No. (#7-A1)
Qty : 1 pc
Bottom Panel
Part No. (#4)
Qty 1
Middle Shelf
Part No. (#5)
Qty : 3 pcs
Left Door - Upper Panel
Part No. (#6-A1)
Qty : 1 pc
8 page

·
Components
Middle Back Panel
Part No. (#9)
Qty : 2 pcs
Bottom Back Panel
Part No.(#10)
Qty : 1 pc
Leveling Feet
Part No.(#6-1)
Qty : 4 pcs
Corner Protection - A
Part No. (#15-2)
Qty : 2 pcs
Corner Protection - B
Part No.(#16-2)
Qty : 2 pcs
Middle Corner Protection
Part No.(#17-2)
Qty : 2 pcs
Magnet
Part No.(#23)
Qty : 2 pcs
Hook
Part No.(#34)
Qty : 12 pcs
Handle
Part No.(#19)
Qty : 2 pcs
Left Foot Frame
Part No.(A)
Qty : 2 pcs
Right Foot Frame
Part No. (B)
Qty : 2 pcs
Key
Part No. (#22)
Qty : 2 pcs
9 page

·
Hardware
Screw F (M4 x 8L)
Part No.(#41)
Qty : 82 pcs
Screw G (M4 x 30L)
Part No.(#42)
Qty : 12 pcs
Screw K (M5 x 10L)
Part No.(#52)
Qty : 8 pcs
Screw L (M4 x 6L)
Part No. (#53)
Qty : 1 pc
Screw N (M4 x 10L)
Part No.(#54)
Qty : 36 pcs
Engineered Nylon Anchor
Part No.(#63)
Qty : 5 pcs
Included for quick assembly
Wall Anchor
Part No.(#55-A)
Qty : 2 pcs
WASHER (M4)
Part No. (#27)
Qty : 2 pcs
WASHER (M8)
Part No. (#27-B)
Qty : 2 pcs
·
Screw D (M8x18L)
Part No.(#17)
Qty : 12 pcs
Tools
Screwdriver (Included)
Part No. (#21)
Qty : 1 pc
Wrench (Included)
Part No.(#25)
Qty : 1 pc
Screw O (M4 x 12L)
Part No.(#61)
Qty : 2 pcs
Mounting Strap
Part No.(#60)
Qty : 2 pcs
Screw M (M6 x 50L)
Part No.(#55)
Qty : 2 pcs
10 page

·Step 1 – Step 3
WARNING:
Step 1: Install Left Side Panel (#1-A)
Do not fully tighten any of the screws until all
Make sure the (#1-A1) Left Side Upper Panel is
flushed with (#1-A2) Left Side Bottom Panel .
Note:
A magnetic screwdriver is included for your
convenience. If using a power screwdriver,
keep toruqe setting on LOW during assembly.
TIP:
Place the (#1-A1) Left Side - Upper Panel and
(#1-A2) Left Side - Bottom Panel together,
place the (#1-A3) Side Panel Reinforcement
Connection Part over the touching edges, line
up screw holes, use 3pcs of (#42) Screw G to
tighten from the side, then use 4pcs of (#41)
Screw F to tighten from the top side.
Some parts may have sharp edges. To avoid
injury, wearing gloves is recommended during
assembly.
Step 2: Install Right Side Panel (#2-A)
Step 3: Install Left Door (#6-A)
Note:
Make sure the
(#6-A1) Left Door - Upper Panel
1). Place (#6-A1) Left Door - Upper Panel and
(#6-A2) Left Door - Bottom Panel together, line
up screw holes, use 1 pc of (#41)Screw F to
tighten from the side.
2). Place the (#6-A3) Door Panel Connection
Part over the touching sides, line up the screw
holes, use 4 pcs of (#41) Screw F to tighten
from the top, and use 4 pcs of (#52) Screw K to
tighten from outside edge.
Do not fully tighten any of the screws until all
screws are partially screwed in first. This will
help you make any adjustment for alignment.
Repeat Step as #1 with Right side panel.
Make sure the
(#6-A1) Left Door - Upper Panel
is flushed with (#6-A2) Left Door - Bottom
Panel.
11 page

·
Step 4 – Step 7
Bottom Panels (#1-A2, #2-A2)
are completely
Back
Front
Front
Front
12 page
Step 4:
Install Right Door (#7-A)
Repeat Step 3, use (#7-A1) Right Door - Upper
Panel, (#7-A2) Right Door - Bottom Panel, (#6-
A3) Door Panel Connection Part. Use 1 pc of
(#41) Screw F to tighten the touching sides, use
4 pcs of (#41) Screw F to tighten from the top
touching side, and 4 pcs (#52) Screw K to tighten
from outside edge.
Note: Make sure the
(#7-A1) Right Door - Upper Panel
is flushed with(#7-A2) Right Door - Bottom Panel.
Step 5:
Install Key Rod (#7-A3)
Attach and insert (#7-A3) Key Rod into the
bottom tab hole of (#7-A2) Right Door - Bottom
Panel. Twist out the pre-assembled (#53) Screw
L on the key rod linkage plate. Attach (#7-A3)
Key Rod by lining up the screw hole and
tightening back in the (#53) Screw L.
Install Top Panel (#3) to Left Side Upper Panel
(#1-A1) and Right Side Upper Panel (#2-A1)
Attach (#3) Top Panel to (#1-A1) Left Side
Upper Panel and (#2-A1) Right Side Upper
Panel. Make sure the front of the panel faces
downward. Line up screw holes, use 6 pcs of
(#41) Screw F to tighten.
Step 6:
Note: Before tightening screws, make sure the bottom
corners of (#1-A1) Left Side Upper Panel and
(#2-A1) Right Side Upper Panels are
completely flushed with the back and front
corners of (#3)Top Panel.
Install Bottom Panel (#4) to Left Side
Bottom Panel
Attach (#4) Bottom Panel to (#1-A2) Left
Side Bottom Panel and (#2-A2) Right Side
Bottom Panel , line up screw holes, use 6 pcs
of (#42)Screw G to tighten.
Step 7:
Back
Note: Before tightening screws, make sure the bottom
corners of Left Side Bottom Panel and Right
Side Bottom Panels (#1-A2, #2-A2) are
completely flushed with the back and front
corners of (#4) Bottom Panel.

Press the
Engineered Nylon
Anchors into the
holes to fasten
#21
#63
#6-1
#17
A
B
A
B
13 page
Step 10:
Rotate/Stand Storage Cabinet upright after this step.
NOTE: Do not fully tighten Screw F before the
Engineered Nylon Anchors are secured.
Step 9: Install Left/Right Foot Frame (A)/(B),
& (#6-1) Leveling Feet
Attach Left/Right Foot Frame (A)/(B) to
bottom panel as left picture shows, use
12pcs of (#17) Screw D to tighten.
Attach (#6-1) Leveling Feet to the four side
corner of (#4) Bottom Panel. Use (#25)
Wrench to tighten.
Install Corner Protections (#15-2, #16-2
and #17-2)
1) Attach
(#15-2, #16-2) Corner Protection
A, B onto top and bottom of the cabinet,
use 20 pcs (#54) Screw N to tighten.
2) Attach (#17-2) Middle Corner Protection
to
the middle of (#1-A) Left Side Panel and
(#2-A)Right Side Panel, use 8 pcs of (#54)
Screw N to tighten.
· Step 8 – Step 10
Step 8: Install Back Panels (#8, #9 and #10)
1) Attach (#10) Bottom Back Panel onto
both (#1-A2 and #2-A2) bottom of Left and
Right
Side Panels and (#4) Bottom Panel.
Line up screw holes and use 10 pcs of (#41)
Screw F in each corner hole to tighten.
2)
Attach both (#9) Middle Back Panel
above (#10) Bottom Back Panel the same
way. Place the groove of the (#9) Middle
Back Panel onto the top edge of the (#10)
Bottom Back Panel. Use 10 pcs of (#41)
Screw F
to tighten each corner of the
panel.
3) Use 10 pcs of (#41) Screw F to install
(#8) Upper Back Panel the same way, with
a screw in each corner of the panel.
4)
Use 5 pcs of (#63) Engineered Nylon
Anchors to secure the back panels. Press
the Engineered Nylon Anchors into the rest
of the holes on the back panels to fasten.

·Step 11 – Step 13
#41
14 page
Step 11: Install Magnet (#23)
Place
(#23) Magnet onto (#3) Top Panel
and
(#4) Bottom Panel facing the front,
use 4 pcs of (#41) Screw F to tighten.
Step 12:
1). Attach (#6-A) Left Door to (#1-A) Left
Side Panel, use 11pcs of (#41) Screw F to
tighten.
Note: The screw holes on the door hinge
have
tolerance, enabling the door to be
adjusted and centered in the door frame.
Place top, middle and bottom Screws first.
Don't tighten screws completely - this may
save time by avoiding having to make slight
adjustments for leveling
door panels later.
2). Install the (#7-A) Right Door the same
way.
Step 13:
Install Left and Right Doors (#6-A, #7-A)
Note: All Middle Shelves (#5) need a hook
at each corner to support it.
2) Place each (#5) Middle Shelf into
cabinet and push down onto (#34) Hooks.
Install Middle Shelves (#5)
1) Decide the height for each (#5) Middle
Shelf. Place 1 pc of (#34) Hook into the
hook slot where each corner of shelf should
be placed. Make sure the hooks supporting
supporting each shelf are at same height.

·
Step 14 – Step 15
#54
#19
15 page
Step 14: Install Handle (#19)
Attach 2pcs of (#19) Handle to the Door
Upper Panel, use 8 pcs of (#54) Screw N to
tighten.
Step 15: Install Mounting Strap (#60)
1) Remove 1 pc of (#41) Screw F from the
back corner protection.
2) Attach the (#60) Mounting Strap to the
back Corner Protection brackets as the left
photo shows using (#61) Screw O and
(#27) Washer.
3)
Drill a hole in the wall with a 5/16" drill
bit, insert the (#55-A) Wall Anchor into the
hole.
4) Attach the other end of the (#60)
Mounting Strap to the wall using (#55)
Screw M and (#27-B) Washer.
Repeat steps A through D to install the
other mounting strap.

·
Caution
·
Troubleshooting
·
Care & Use Instructions
Care
Problem Possible Cause Prevention / Solution
Recommend using TWO people to assemble the cabinet.
Use a soft, clean cloth that will not scratch the surface when cleaning.
Not level Surface not level Adjust leveling feet
Doors do not align Screws not adjusted Loosen screws,
moving up and down
·
Storage Instructions
·
Warranty Information
NOTE: Please consider recycling all applicable packaging material.
Do not store this unit where there is excessive humidity, direct abrasion or
exposure to the natural elements.
This product’s components have a 1-year guarantee against defects in material and/or workmanship. If you
have any questions regarding the warranty or spare / replacement parts, please call our toll-free number 1
[phone] or email us at [email protected].
This product is covered by the Sam's Club Member Satisfaction Guarantee. Please visit samsclub.com for
more information.
16 page

Made in Taiwan
Distributed by Sam’s West Inc.
2101 SE Simple Savings Dr.
Bentonville, Arkansas 72716-0745
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
17 page