Members Mark Napa AGT14723-4SC User manual

THIS ASSEMBLY MANUAL CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Assembly Instructions & User's Manual
for
Members Mark Napa 4pc Deep Seating Set
Item Number:
Model Number: AGT14723-4SC
Customer Assistance : 1-800-416-3511
or Email: [email protected]
(spare/replacement parts)
Page 1
Need Assistance? Visit us at: samsclub.com/membersmarkhelp

Need Assistance? Visit us at: samsclub.com/membersmarkhelp
Page 2
Table of Contents
Quality Statement.............................................................3
Important Safety Information.............................................3
Before Assembly..............................................................3
Package Contents............................................................4
Product Information..........................................................5
Care & Use and Storage Instructions..................................11
Warranty Information........................................................11
Sofa
Components...............................................................6
Hardware...................................................................6
Tools..........................................................................6
Step1-Step2...............................................................7
Coffee Table
Components................................................................8
Hardware....................................................................8
Tools...........................................................................8
Step1-Step4...........................................................9-10

Before Assembly
Important Safety Information
Please read all instructions carefully before assembling this furniture.
For your safety, assembly by two or more adults is strongly recommended.
Use only vendor-supplied hardware to assemble this item. Using unauthorized
hardware could jeopardize the structural integrity of the item.
Hardware may loosen overtime. Periodically check that all connections are tight.
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
Page 3
Quality Statement
Remove all parts and hardware from the box. Place all items on a carpeted or
scratch-free work surface, as this will avoid damaging parts during assembly.
The shipping box can provide an ideal work surface if none is available.
Use the components and hardware lists below to identify, inventory and
separate each of the hardware and components included.
To avoid accidentally discarding small components or hardware, do not dispose
of any packaging or contents of the shipping carton until assembly is complete.
DO NOT USE power tools unless it is explicitly identified in this manual as
required for use during assembly. Power tools can damage the fasteners,
hardware and/or components.
Do not fully tighten all fasteners / screws until all parts are in place. Failure to
follow these instructions may cause the fasteners / screws to misalign during
assembly.

Need Assistance? Visit us at: samsclub.com/membersmarkhelp
1Set / 1Ctn
Box1of1：
Component QuantityDescription
A
B
C
D
Swivel Glider 2
A
B
Page 4
Package Contents
4
Furniture Cover
C
Sofa 1
Coffee Table 1
D

A
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
Description Dimensions
Part No.
AGT14723
Weight
Capacity
Factory
Assembly
250lb per seat Y
A.Foot Cap
FC0768 N/A Y
Description Dimensions
Part No.
AKT13717
Weight
Capacity
Factory
Assembly
N
A.Foot Cap
FC0607 N/A N/A Y
N/A
Page 5
Product information
Swivel Glider
A
N/A
Description Dimensions
Part No.
AGT14706
Weight
Capacity
Factory
Assembly
N
A.Foot Cap-1
FC0607 N/A N/A Y
B.Foot Cap-2
FC0710 N/A N/A Y
Sofa 250lb per seat,
total 750lb
B
Coffee Table
A
Description Part No.
ZZW04612
Swivel Glider's
Cover
ZZW04712
Sofa's Cover
ZZW02512
Coffee Table's
Cover
32"W*26.5"D*36"H
32.75"W*72.5"D*36"H
43.75"W*27.75"D*20"H

(H3)
HEX BOLT DRIVER
Qty: 1
PART NO:HW0006
Components
Hardware
A.
Part No.
Qty 1
SOFA FRAME
AK1466
B MIDDLE LEG
Part No.
Qty 1
.
AK1467
Tools
Page 6
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
(H1)
5/16"X35MMBOLT
Qty: 3
PART NO:HW0820
(H2)
Ø8.5 X 1.5 MM WASHER
HW0861
Qty: 3
PART NO:

outer carton
H2
H1
H2
H1
H2
H1
H3
B
NOTE: Bolts must be FULLY tightened.
Step 1
Step 2
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
Step1-Step2
Page 7
(H3)
HEX BOLT DRIVER
Qty: 1
(H1)
5/16"X35MMBOLT
Qty: 3
(H2)
Ø8.5 X 1.5 MM
WASHER
Qty: 3

Need Assistance? Visit us at: samsclub.com/membersmarkhelp
Components
Hardware
A.
Part No.
Qty 1
TABLE TOP
AT53050
B
Part No.
Qty 1
.LEG CONNECTOR BRACKET
AT53051
C.
Part No.
Qty 4
TABLE LEG
AT53052
Tools
(H5)
HEX BOLT DRIVER
Qty:
PART NO:HW0006
1
Page 8
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
(H1)
1/4"X20MMBOLT
Qty: 8
PART NO:HW0802
(H2)
1/4"X30MMBOLT
Qty: 8
PART NO:HW0817
(H3)
Qty: 8
Ø6.5 X 1.0 MM WASHER
PART NO:HW0004
(H4)
Qty:
Ø18 X Ø6.5 X 1.0 MM WASHER
PART NO:HW0004
8

H1
H4
Hand tighten only 2-3 turns.
H2
H3
H2
Hand tighten only 2-3 turns.
outer carton
(H1)
1/4"X20MMBOLT
Qty: 8
(H4)
Qty: 8
Ø18XØ6.5X1.0MM
WASHER
Step 1
Step 2
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
Step1-Step4
(H2)
1/4"X30MMBOLT
Qty: 8
(H3)
Qty: 8
Ø6.5 X 1.0 MM WASHER
Page 9

NOTE: Bolts must be
FULLY tightened.
4x
H5
H5
4x
4x
(H5)
Qty: 1
HEX BOLT DRIVER
Step 3
Step 4
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
Page 10