Members Mark BFW00501-5IC Owner's manual

THIS ASSEMBLY MANUAL CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Page 1
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
Assembly Instructions & User's Manual
for
Members Mark Heritage 5pc Dining Set in Indigo
Item Number:
Model Number:
990018737
BFW00501-5IC
Customer Assistance : 1-800-416-3511
or Email: [email protected]
(spare/replacement parts)

Need Assistance? Visit us at: samsclub.com/membersmarkhelp
Page 2
Table of Contents
Quality Statement.............................................................
Important Safety Information.............................................
Before Assembly..............................................................
Package Contents............................................................
Product Information..........................................................
Care & Use and Storage Instructions.................................
Warranty Information.......................................................
Swivel Rocker
Components................................................................
Hardware....................................................................
Tools..........................................................................
Step1-Step3.............................................................
Dining Table
Components...............................................................
Hardware...................................................................
Tools..........................................................................
Step1-Step4.........................................................
3
3
3
4
5
6
6
6
78-
9
9
9
10 11
12
12
-

Before Assembly
Important Safety Information
Please read all instructions carefully before assembling this furniture.
For your safety, assembly by two or more adults is strongly recommended.
Use only vendor-supplied hardware to assemble this item. Using unauthorized
hardware could jeopardize the structural integrity of the item.
Hardware may loosen overtime. Periodically check that all connections are tight.
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
Page 3
Quality Statement
Remove all parts and hardware from the box. Place all items on a carpeted or
scratch-free work surface, as this will avoid damaging parts during assembly.
The shipping box can provide an ideal work surface if none is available.
Use the components and hardware lists below to identify, inventory and
separate each of the hardware and components included.
To avoid accidentally discarding small components or hardware, do not dispose
of any packaging or contents of the shipping carton until assembly is complete.
DO NOT USE power tools unless it is explicitly identified in this manual as
required for use during assembly. Power tools can damage the fasteners,
hardware and/or components.
Do not fully tighten all fasteners / screws until all parts are in place. Failure to
follow these instructions may cause the fasteners / screws to misalign during
assembly.

Need Assistance? Visit us at: samsclub.com/membersmarkhelp
1Set / 2Ctn
Box1of2:
Box2of2:
Component QuantityDescription
A
B
C
D
Swivel Rocker 4
Component QuantityDescription
A1
A B
Page 4
Package Contents
A
Table Top
1
Furniture Cover
C D
Table Leg 4
Leg Connector
Bracket 1

Need Assistance? Visit us at: samsclub.com/membersmarkhelp
Description Dimensions
Part No.
ALY13613
Table N
A.Foot Cap
FC0607 N/A N/A Y
A
N/A
Page 5
Product information
Description Dimensions
Part No.
250lb N
A.Foot Cap
FC0370 N/A N/A Y
Swivel Chair
A
Description Part No.
Furniture Cover
Weight
Capacity
Factory
Assembly
Weight
Capacity
Factory
Assembly
BFW00501
PCT2104T
27.25"D*23.5"W*37"H
45.75"RD*28.75"H

(H12)
HEX BOLT DRIVER
Qty: 1
PART NO:HW0006
Components
Hardware
A.
Part No.
Qty 1
CHAIR FRAME
SR0263
B
Part No.SR0264
Qty 1
.LEFT ARM
Tools
Page 6
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
C. RIGH
Part No.
Qty 1
TARM
SR0265
(H11)
HEX WRENCH-2
HW0008
Qty:
PART NO:
1
(H10)
HEX WRENCH-1
HW000
Qty:
PART NO:
1
7
(H2)
5/16"X35MMBOLT
Qty: 4
PART NO:HW0820
(H4)
Ø8.0 X 2.3 MM SPRING WASHER
Qty: 4
PART NO:HW0003
(H9)
ROCKER PLATE
Qty: 2
FACTORY ASSEMBLY
PART NO:G0228
(H7)
5/16" NUT
Qty:
PART NO:HW0015
4
(H5)
Ø6.5 X 1.0 MM WASHER
HW0004
Qty: 6
PART NO:
(H1)
1/4"X30MMBOLT
Qty: 4
PART NO:HW0817
(H3)
1/4"X45MMBOLT
Qty:
PART NO:HW0805
2
(H6)
U" METAL PLATE
HW0760
Qty:
PART NO:
2
(H8)
Ø6.5 X 1.6 MM SPRING WASHER
Qty: 4
PART NO:HW0443
D BASE AND ROCKER
ASSEMBLY
SR0266
.
Part No.
Qty 1

(H12)
HEX BOLT DRIVER
Qty: 1
2x
H12
NOTE: Bolts must be FULLY .tightened
(H5)
Ø6.5 X 1.0 MM WASHER
Qty: 6
(H1)
1/4"X30MMBOLT
Qty: 4
(H3)
1/4"X45MMBOLT
Qty: 2
(H8)
Ø6.5 X 1.6 MM
SPRING WASHER
Qty: 4
Hand tighten only 2-3 turns.
Hand tighten only 2-3 turns.
H5
H3
H1
H5
H5
H1
H3
H5
4x
H12
Step 1
Step 2
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
Step1-Step3
Page 7
H8 H8

(H6)
U" METAL PLATE
Qty: 2
(H11)
HEX WRENCH-2
Qty: 1
(H10)
HEX WRENCH-1
Qty: 1
(H7)
5/16" NUT
Qty: 4
(H4)
Ø8.0 X 2.3 MM SPRING WASHER
Qty: 4
(H2)
5/16"X35MMBOLT
Qty: 4
"U" BAR
"U" BAR
H6
H7
H4
H2
Hand tighten only 2-3 turns.
H10
NOTE: Bolts must be
FULLY .tightened
AB
CD
E
"U" BAR
Step 3
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
Page 8
H11
CAUTION:
1.Note the horseshoe shape of the rocker plate. Point the open end of the horseshoe away from you. The arrows
on the rocker assembly should be pointing towards you.
2.Failure to place "U" metal plates (H6) under the rocker plates and above the "U" bar exactly as shown in the
diagram will cause the bolt heads and nuts to damage the structure of the rocker plates and the "U" bar. Damage
due to over tightening of bolts or improper assembly could cause injury and may void your warranty.

Components
Hardware
A.
Part No.
Qty 1
TABLE TOP
AT53375
B
Part No.
Qty 1
.LEG CONNECTOR BRACKET
AT53376
C.
Part No.
Qty 4
TABLE LEG
AT53377
Tools
(H6)
HEX BOLT DRIVER
Qty:
PART NO:HW0006
1
(H1)
1/4"X35MMBOLT
Qty: 8
PART NO:HW0046
(H4)
Qty: 8
1/4" NUT
PART NO:HW0014
(H2)
Qty: 8
Ø6.5 X 1.0 MM WASHER
PART NO:HW0004
(H7)
Qty: 1
HEX WRENCH
PART NO:HW0009
Page 9
(H3)
Qty:
Ø26XØ6.5X2.0MMWASHER
PART NO:HW0624
8
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
(H5)
Qty:
(FACTORY ASSEMBLY)
UMBRELLA HOLE RING
PART NO:G0157
1

Step 1
Step 2
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
Step1-Step4
Page 10
(H1)
1/4"X35MMBOLT
Qty: 8
(H3)
Qty:
Ø26XØ6.5X2.0MM
WASHER
8
Hand tighten only 2-3 turns.
(H2)
Qty:
Ø6.5 X 1.0 MM WASHER
8
(H )4
STEEL
Qty:
1/4" NUT
8
Hand tighten only 2-3 turns.
H1
H3
H4
H2

(H6)
Qty: 1
HEX BOLT DRIVER
(H7)
Qty: 1
HEX WRENCH
Step 3
Step 4
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
Page 11
4x
4x
H6
H7
NOTE: Bolts must be
FULLY .tightened
4x

Need Assistance? Visit us at: samsclub.com/membersmarkhelp
Warranty Information
This product component has a 5 year guarantee against defects in material and/or workmanship. If
you have any questions regarding the warranty or spare / replacement parts, please call our toll-
free number or email us at1-800-416-3511 [email protected]
NOTE: Please consider recycling all applicable packaging material.
Page 12
CARE AND MAINTENANCE
FRAMES
FABRICS (CUSHIONS/SLINGS)
STRAPS
CERAMIC TILE
UMBRELLA USAGE WARNING!
Cleaning
Maintenance
Cleaning -
Maintenance
Cleaning -
Maintenance -
- Use mild soap and warm water. Do not use abrasive materials, cleaners, or bleach
products. Rinse with clean water and dry thoroughly.
- Periodically clean and dry thoroughly. Be sure to drain any water accumulated
inside the frames. To thoroughly drain frames, remove foot caps and tilt the frames, if necessary, to
remove all water. This is critical. Water allowed to accumulate inside the frames and then
exposed to sub-freezing temperatures can cause damage to the frame tubing. Always clean,
drain, and dry thoroughly before storing for the winter. For best results, always store or cover your
furniture when not in use. We recommend commercially available outdoor furniture covers. Any
small nicks or scratches can be covered with a light application of touch-up paint.
** When cleaning or moving large or heavy items, always have two people work together. Never
drag furniture.
Wipe minor spills immediately. Clean with mild soap, warm clean water, and a soft
cloth. Do not use abrasive materials, cleaners, or bleach products. Although fabric has been
treated to resist stains, occasional use of commercially available fabric cleaners may be
necessary. Follow manufacturer's instructions.
- The best way to maintain the beauty of cushions and slings is to store them in a dry
area and out of the elements when not in use or cover with commercially available outdoor
furniture covers.
Furniture covers are a great way to protect your set from harsh elements of weather and UV light.
However, it is important to ensure furniture and covers are free of moisture and debris before
covering. It is also necessary to promptly uncover furniture after rain and during periods of high
humidity to prevent moisture build up. Failure to do so can lead to permanent surface and finish
damage.
Wash frequently with mild soap, warm water, and a soft cloth. Rinse thoroughly with
warm, clean water. Do not use abrasive materials, cleaners, or bleach products.
Periodic application of commercially available vinyl cleaners and vinyl protectors will
enhance the look and prolong the life of straps. If your strap chair has cushions, make sure any
vinyl protectors applied are completely dry before placing cushion back on the chair.
Use clean water and mild detergent or commercially available ceramic tile cleaners as necessary.
Do not use abrasive materials or cleansers as they may scratch the surface of the tiles. Dry with
soft cloth. Do not use commercially available ceramic tile cleaners on table frame.
If you will be using an umbrella with your table, make sure the plastic umbrella ring is inserted into
the hole in the center of the table. Place the umbrella through the opening and into an umbrella
stand made of cast iron, wrought iron, steel plate or blow molded plastic filled with 20-50 lbs or 9-
22 kgs of sand and water. If your table is 72" or 182 cm or larger, we recommend a weight of at
least 50 lbs or 22 kgs or more. NEVER USE AN UMBRELLA WITH A TABLE WITHOUT USING
AN UMBRELLA BASE AND RING AS DESCRIBED ABOVE. ALWAYS REMOVE YOUR
UMBRELLA FROM THE TABLE WHEN NOT IN USE. NEVER USE AN UMBRELLA DURING
STORMS OR WINDY CONDITIONS.
Care & Use Instructions

Distributed by Sam's West Inc.
2101 SE Simple Savings Dr.
Bentonville, Arkansas 72716-0745
Made in China
Page 13
Need Assistance? Visit us at: samsclub.com/membersmarkhelp