Members Mark TM610509 User manual

THIS ASSEMBLY MANUAL CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
1
Dining Side Chair
Assembly Manual
Model Number: TM610509
9 PC Teak Dining Set with Cushion

2
Important Safety Information
Please read all instructions carefully before assembling this furniture.
For your safety, assembly by two or more adults is strongly recommended.
Use only vendor-supplied hardware to assemble this item. Using unauthorized
hardware could jeopardize the structural integrity of the item.
Hardware may loosen overtime. Periodically check that all connections are tight.
·
·
·
·
Before Assembly
Remove all parts and hardware from the box. Place all items on a carpeted or
scratch-free work surface, as this will avoid damaging parts during assembly.
The shipping box provides an ideal work surface.
To avoid accidentally discarding small parts or hardware, do not dispose of any
packaging or contents of the shipping carton until assembly is complete.
Use the parts and hardware lists below to identify and separate each of the
pieces included.
The use of power tools for assembly is not recommended. Power tools can
damage the hardware and/or split the wood.
Note: Do not fully tighten all bolts until all parts are in place. Failure to follow
these instructions may cause the bolts to misalign during assembly.
·
·
·
·
·
·
Care and Cleaning
To increase the item lifespan, avoid leaving the furniture in standing water or
indirect contact with wet ground.
·
Cover or move the furniture into covered storage during inclement weather and
during winter months.
·
Clean periodically with soft flannel cloth, slightly dampened with a mild soap
solution and warm water. DO NOT use abrasive material, bleach or scouring
products. Dry thoroughly with soft cloth.
·

3
Short Bolt
Qty: 4 Pcs + 1
Phillips Screwdriver
Tools Needed for Assembly
Hardware
(D)
Need assistance? Visit us at: samsclub.com/membersmarkhelp
Component
(E)
A1 ..........
A2 ..........
B ............
C ............
1 PC
1 PC
1 PC
1 PC
Right side frame .................
Left side frame ....................
Backrest .............................
Seat ......................................
Long bolt
Qty: 4 Pcs + 1
(F)
A1 A2 BC
Elbow Hardware
Qty: 2 Pcs

Step 1
4
Need assistance? Visit us at: samsclub.com/membersmarkhelp
(E)
Long Bolt
Qty: 2 Pcs
(D)
Short Bolt
Qty: 4 Pcs
CB
A1
E
E
A2
B
A1
D
F
(E)
Long Bolt
Qty: 2 Pcs
Attach the Right side frame (A1), Back rest (B)
and Seat (C) matching the hole and secure with
Long Bolt (E). Tighten all bolts using screwdriver.
Attach the Left side frame (A2) matching to hole
previous assembly. secure with long bolt (E).
Tighten all bolts using screwdriver.
Install the Elbow Hardware (F) in the upper
back corner. secure with short bolt (D). Insert
both short bolt (D) before Tighten using
screwdriver. THE CHAIR IS NOW READY FOR USE
MAINTENANCE
Due to teak wood's natural characteristics, wood color and grain variations may be
present. This is a symbol of the originality of each unit and gives each finished piece a
distinctive look and inherent charm.
Care Instruction :
Teak wood, when left bare and unsanded, will naturally fade to a silver-gray color. This
silver-gray color transformation does not in any way affect the durability of the furniture.
To maintain the smooth finish and golden brown color of your teak furniture, you will
need to sand the furniture regularly. To prolong the period of time needed between
sanding, teak oil may also be applied.
If you choose to apply teak oil, apply every 6 months, or follow the teak oil container
directions. Again, if you choose to maintain the smooth brown finish of your teak
furniture, this method requires some regular maintenance, such as sanding and
reapplication of teak oil. Teak oil, along with sanding, will help maintain the golden
brown color.
Staining :
Please note, once you stain your teak, it will not return to the natural golden brown or
weathered silver-gray color without sanding off the stain. Staining is intended to be
permanent. If you choose to stain your furniture after it has turned silver-gray, you must
first sand it before applying the stain.
Cushions :
Outdoor fabrics are designed to be breathable; they are water repellent but are not
waterproof. It is recommended that you store the cushions during rainy weather.
The best way to keep your fabrics looking good is to simply clean them as needed. Rinse
off dust and dirt, wipe spills as soon as they occur, or spot clean soon after stains occur.
Removable cushion covers may be machine-washed in cold water with mild laundry
soap and air dried.
Do not leave your teak wood furniture in puddles of water or on wet ground.
Cover your teak wood furniture during winter months or move into covered
storage, if in wet climates.
The manufacturer supports protection of the world's forest resources and is
diligent in sourcing legally harvested wood.
Thank you
The manufacturer
5
Step 2
Step 3 Step 4
(F)
Elbow Hardware
Qty: 2 Pcs

THIS ASSEMBLY MANUAL CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
1
Dining Arm Chair
Assembly Manual
Model Number: TM610509
9 PC Teak Dining Set with Cushion

2
Important Safety Information
Please read all instructions carefully before assembling this furniture.
For your safety, assembly by two or more adults is strongly recommended.
Use only vendor-supplied hardware to assemble this item. Using unauthorized
hardware could jeopardize the structural integrity of the item.
Hardware may loosen overtime. Periodically check that all connections are tight.
·
·
·
·
Before Assembly
Remove all parts and hardware from the box. Place all items on a carpeted or
scratch-free work surface, as this will avoid damaging parts during assembly.
The shipping box provides an ideal work surface.
To avoid accidentally discarding small parts or hardware, do not dispose of any
packaging or contents of the shipping carton until assembly is complete.
Use the parts and hardware lists below to identify and separate each of the
pieces included.
The use of power tools for assembly is not recommended. Power tools can
damage the hardware and/or split the wood.
Note: Do not fully tighten all bolts until all parts are in place. Failure to follow
these instructions may cause the bolts to misalign during assembly.
·
·
·
·
·
·
Care and Cleaning
To increase the item lifespan, avoid leaving the furniture in standing water or
indirect contact with wet ground.
·
Cover or move the furniture into covered storage during inclement weather and
during winter months.
·
Clean periodically with soft flannel cloth, slightly dampened with a mild soap
solution and warm water. DO NOT use abrasive material, bleach or scouring
products. Dry thoroughly with soft cloth.
·

3
Short Bolt
Qty: 4 Pcs + 1
Phillips Screwdriver
Tools Needed for Assembly
Hardware
(D)
Need assistance? Visit us at: samsclub.com/membersmarkhelp
Component
(E)
A1 ..........
A2 ..........
B ............
C ............
1 PC
1 PC
1 PC
1 PC
Right side frame .................
Left side leg ........................
Backrest .............................
Seat ......................................
Long bolt
Qty: 4 Pcs + 1
(F)
A1 A2 BC
Elbow Hardware
Qty: 2 Pcs

Step 1
4
Need assistance? Visit us at: samsclub.com/membersmarkhelp
(E)
Long Bolt
Qty: 2 Pcs
(D)
Short Bolt
Qty: 4 Pcs
CB
A1
E
E
A2
B
A1
D
F
(E)
Long Bolt
Qty: 2 Pcs
Attach the Right side frame (A1), Backrest (B) and Seat
(C) matching the hole and secure with Long Bolt (E).
Tighten all bolts using screwdriver.
Attach the Left side frame (A2) matching to hole previous
assembly. secure with long bolt (E).
Tighten all bolts using screwdriver.
Install the Elbow Hardware (F) in the upper back corner.
secure with short bolt (D). Insert both short bolt (D) before
Tighten using screwdriver. THE CHAIR IS NOW READY FOR USE
MAINTENANCE
Due to teak wood's natural characteristics, wood color and grain variations may be
present. This is a symbol of the originality of each unit and gives each finished piece a
distinctive look and inherent charm.
Care Instruction :
Teak wood, when left bare and unsanded, will naturally fade to a silver-gray color. This
silver-gray color transformation does not in any way affect the durability of the furniture.
To maintain the smooth finish and golden brown color of your teak furniture, you will
need to sand the furniture regularly. To prolong the period of time needed between
sanding, teak oil may also be applied.
If you choose to apply teak oil, apply every 6 months, or follow the teak oil container
directions. Again, if you choose to maintain the smooth brown finish of your teak
furniture, this method requires some regular maintenance, such as sanding and
reapplication of teak oil. Teak oil, along with sanding, will help maintain the golden
brown color.
Staining :
Please note, once you stain your teak, it will not return to the natural golden brown or
weathered silver-gray color without sanding off the stain. Staining is intended to be
permanent. If you choose to stain your furniture after it has turned silver-gray, you must
first sand it before applying the stain.
Cushions :
Outdoor fabrics are designed to be breathable; they are water repellent but are not
waterproof. It is recommended that you store the cushions during rainy weather.
The best way to keep your fabrics looking good is to simply clean them as needed. Rinse
off dust and dirt, wipe spills as soon as they occur, or spot clean soon after stains occur.
Removable cushion covers may be machine-washed in cold water with mild laundry
soap and air dried.
Do not leave your teak wood furniture in puddles of water or on wet ground.
Cover your teak wood furniture during winter months or move into covered
storage, if in wet climates.
The manufacturer supports protection of the world's forest resources and is
diligent in sourcing legally harvested wood.
Thank you
The manufacturer
5
Step 2
Step 4Step 3 (F)
Elbow Hardware
Qty: 2 Pcs

THIS ASSEMBLY MANUAL CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
1
Teak Dining Table
Assembly Manual
Model Number: TM610509
9 PC Teak Dining Set With Cushion

2
Important Safety Information
Please read all instructions carefully before assembling this furniture.
For your safety, assembly by two or more adults is strongly recommended.
Use only vendor-supplied hardware to assemble this item. Using unauthorized
hardware could jeopardize the structural integrity of the item.
Hardware may loosen overtime. Periodically check that all connections are tight.
·
·
·
·
Before Assembly
Remove all parts and hardware from the box. Place all items on a carpeted or
scratch-free work surface, as this will avoid damaging parts during assembly.
The shipping box provides an ideal work surface.
To avoid accidentally discarding small parts or hardware, do not dispose of any
packaging or contents of the shipping carton until assembly is complete.
Use the parts and hardware lists below to identify and separate each of the
pieces included.
The use of power tools for assembly is not recommended. Power tools can
damage the hardware and/or split the wood.
Note: Do not fully tighten all bolts until all parts are in place. Failure to follow
these instructions may cause the bolts to misalign during assembly.
·
·
·
·
·
·
Care and Cleaning
To increase the item lifespan, avoid leaving the furniture in standing water or
indirect contact with wet ground.
·
Cover or move the furniture into covered storage during inclement weather and
during winter months.
·
Clean periodically with soft flannel cloth, slightly dampened with a mild soap
solution and warm water. DO NOT use abrasive material, bleach or scouring
products. Dry thoroughly with soft cloth.
·