Mercia Garden Products 04GREEN0406SD-V5 User manual

P 1
04GREEN0406SD-V5










x2
















  




4 X 6 GREENHOUSE
ASSEMBLY INSTRUCTIONS
04GREEN0406SD-V5

P 2
04GREEN0406SD-V5
Overall Dimensions:
Width = 1215mm
Depth = 1887mm
Height = 2066mm
Base Dimensions:
Width =1191mm
Depth = 1862mm
Please retain product label and instructions for future reference
Before assembly
please make sure you have a
suitable base ready to erect your
building
MADE IN GREAT BRITAIN
Door Side
AI-04GREENDS610X1543-V5
QTY 2
Sml Window Side
AI-04GREENWS1193X1543-V5
QTY 2
Lrg Window Side
AI-04GREENWS1776X1543-V5
Door Gable Top
AI-04GREENDGT1864X426-V5
Roof
(Opening Window)
AI-04GREENROOFOW1218X1037-V1
Plain Gable Top
AI-04GREENPGT1864X426-V5
23
45
1
6
Roof
AI-04GREENROOF1218X1037-V1
8
Door
AI-04GREENDOOR550X1720-V5
9
Opening
Window
AI-04GREENOW560X460-V5
789
10
11
Fascia 1075mm QTY 4
Base Frame 1864mm QTY 2
Base Frame 1105mm QTY 2
10
11
12
13
Roof Support Bar 1242mm
18 19
F4444-1105mm
S1256-1075mm
F4444-1864mm
F2744-1242mm (8mm LIP, X2 66DEG CUTS)
S1227-556mm
S1227-1717mm
S1256-1242mm
F2744-556mm
PI-07-0004 PI-07-0008
PI-07-0182
Buttery Hinges QTY 4 Window Casement Stay Window Glazing Bead QTY 8
PI-07-0063
20
Finial QTY 2
21 22
Wooden Knob
23
Turn Button QTY 2
15
16
Door strip 1717mm x2
Roof trim 1242mm
17
Short Door strip 556mm
Door Frame 556mm
13
14
PI-04-0024SHED DIAMOND FINIAL

P 3
Please retain product label and instructions for future reference
Window Strip 1776mm
Window Strip 926mm QTY 14 S1227-926mm Window Cill 610mm QTY 2
Window Cill 1193mm QTY 2
Window Cill 1776mm
PI-08-0021
PI-08-0019
PI-08-0020
S1227-1776mm
Window Strip 1193mm QTY 2
Window Strip 610mm QTY 2
S1227-1193mm
S1227- 610mm
Strip 543mm S1244- 543mm Strip 560mm S1221- 560mm
Corner Trims 1576mm QTY 4 S1256- 1576mm
Strip 993mm QTY 6
Styrene 942x570x2mm QTY 9
Styrene 503x570mm
Styrene 985x570mm QTY 3
PI-05-0151
PI-05-0157
PI-05-0158
S1244- 993mm
Strip 1218mm QTY 2 S1244- 1218mm
28
27
26
25
24
29
33
34
35
36
37
38
30
31
32
Nail Bag 30mm Screw x 150
20mm Screw x 6
50mm Screw x 60
70mm Screw x 8
40mm Screw x 8
16mm Screws x 20
30mm Black Screw x 18

Side
Rear
Front
P4
Please retain product label and instructions for future reference
Step 1
Lay the base frame down as shown in the
diagram. Ensure the base is square and
layed on level ground. Fix the base
framing (No. 11) &(No. 12) together with
2 x 70mm screws per corner, pre drill to
avoid splitting the timber.
8x70mm screws.
Pre drill
hole
70mm
screw
Pre drill
hole
Step 2
Assemble the window panels on the oor.
Place the plastic window cill onto the lip
of the window panel externally.
1b. Lay the styrene on top of each open-
ing so that it overlaps the surrounding
framing equally on both sides as per the
diagram.
Step 3
Attach the window strips using 3x30mm
screws as per the diagram, starting with
the top strip. Ensure the framing does not
protrude the width of the window frame.
Ensure you screw into the window strips
to the side of where the styrene meets
the window frame.
81x30mm
11
11
12
12
Styrene
Styrene
Styrene
Window Cill
Styrene
24
24
24
25
27
26
Styrene
Styrene Styrene
Styrene Styrene Styrene
34
35
36
30
30mm
screw
Pre Assembly
Before assembling remove the transportation
blocks from the bottom of each panel.

P 5
Please retain product label and instructions for future reference
Step 4
Fix the corners of the Sml Window Side
(No. 2) and the Lrg Window Side (No. 3)
with 3x50mm screws as shown in the
diagram.
*The large window side sits inbetween
the two side panels.*
3x50mm screws.
Pre drill
hole
50mm
screw
Side
Front
Rear
Step 5
Fix the remaining Sml Window Side
(No. 2) at the corner using 3 x 50mm
screws.
3x50mm screws.
Pre drill
hole
50mm
screw
Side
Front
Rear
Step 6
Fix the Door Sides (No. 1) between the
window panels using 6x50mm screws.
6x50mm Screws.
Pre drill
hole
50mm
screw
Step 7
Fix the Door frame (No. 14) to the base
frame between the Door sides. This
allows for the door sides to be correctly
spaced.
3x40mm Screws.
Pre drill
hole
50mm
screw
32
2
1
1
14

P 6
Please retain product label and instructions for future reference
Step 9
Fix the two Door strips (No. 15) to either
side of the door panels with 3x30mm
screws per strip.
6x30mm Screws.
Pre drill
hole
30mm
screw
Step 8
Fix the Gable tops (No. 4) &(No. 5) to the
panels using 4x50mm screws per top as
shown in the diagram.
8x50mm Screws.
The building can now be attached to the
oor framing with 6x50mm screws per
side.
24x50mm Screws.
Pre drill
hole
50mm
screw
Step 10
Fix the Door strip (No. 17) to the top of
the door opening with 3x30mm screws.
3x30mm Screws.
Pre drill
hole
30mm
screw
Step 11
Lay the roof panel down (No. 6) and place
the styrene sheets (No. 30, 32) in position
using the beads (No. 20) which will be
screwed down with 2x16mm screws.
Ensure the thinner edge of the frame is
facing the bottom.
8x16mm Screws.
Pre drill
hole
16mm
screw
20
6
4
5
15
15
31
32

P 7
Please retain product label and instructions for future reference
Pre drill
hole
30mm
screw
30mm
screw
16mm
screw
Step 12
Fix the strips (No 28, 29, 33) onto the
window frame using 3x30mm screws
per strip. Ensure you screw to the side
of the styrene not through it.
15x30mm Screws.
Step 13
Attach the strip (No.37) onto the window
panel with 4x30mm screws. Drop the
window (No.9) into the aperture and
attach the window on the roof panel
(No.6) using 4x16 screws and 4x30mm
screws per hinge.
8x30mm Screws.
4x16mm Screws.
33
37
28
29
29
29
9
30mm
16mm
20

P 8
Please retain product label and instructions for future reference
Step 16
Fix the Casement stay (No. 19) to the
opening window then align the xings
onto the window panel frame. Ensure the
casement stay ts onto xings when
closed before screwing them down using
6x20mm screws.
6x20mm Screws.
Pre drill
hole
20mm
screw
6x20mm screws per casement stay
19
Step 15
Place the Roof panels (No. 6) &(No. 7) on
top of each gable, making sure the roofs
are ush to each gable and meet at the
top of the apex.
Secure each roof panel to the building
using 16x50mm screws.
16x50mm Screws.
*IMPORTANT: Ensure both roof
sections meet at the top of the
apex as shown in the illustration.
Pre drill
hole
50mm
screw
*
6
7
Step 14
Repeat step 12 for part 7.
12x30mm Screws.

P 9
Please retain product label and instructions for future reference
Step 17
Attach the Roof Support bar (No. 13) to
the roof panels using 5x40mm screws.
Screw diagonally through the support
into the roof panel as shown in the
diagram.
5x40mm Screws.
Pre drill
hole
40mm
screw
Step 18
Fix the door (No. 8) to the building using
16x30mm black screws per hinge
(No. 18) as shown in the diagram.
16x30mm Black Screws.
Fit the turn buttons (No. 23) to the
building using 2x30mm black screws.
2x30mm Black Screws.
Pre drill
hole
30mm
screw
23
Step 19
Fix the corner trims (No.38) in position
using 4x30mm screws
16x30mm Screws
Pre drill
hole
30mm
screw
8
18
13
38

P 10
Please retain product label and instructions for future reference
Step 23
It is ESSENTIAL to seal around all window
framing with silicone sealant (not included)
to minimise water ingress.
*Please note: This image is for illustrative
purposes and may dier from your product
(in regards to the number of windows)
however the principle is the same.
Step 20
Fit the fascias (No. 10) and the nials (No.
21)to the building using 14x30mm screws
as shown in the diagram.
14x30mm Screws
Pre drill
hole
30mm
screw
Step 21
Fix the Roof trim (No. 16) to the top of the
building and secure with 4x30mm screws
as shown.
4x30mm Screws
Pre drill
hole
30mm
screw
It is ESSENTIAL that you apply wood treat-
ment immediately after the building has
been assembled.
AFTER TREATMENT:
score around protective
cover on glazing and
carefully peel
covering back
SILICONE
SEALANT
Step 22
10
10
10
10
16
21

P 11
12

P 12