Midea VHS01A17Z0A User manual

Service Manual
Cord Stick Vacuum Cleaner
VHS01A17Z0A
Midea LOGO
Contents
1Specifications…………………………………………………………1-2

2 Electrical Diagram…………..…………………………….…………..3
3 Schematic Diagram……………………………..…………………….4
4 Repair of Main Parts…………………………………….……………5
4.1 Upper and Lower Body……………………………………………6
4.2 Cord Reel Assembly…………………………………………..……7
4.3 Motor……………………………………………………………………..8
4.4 Connection Hose, Hose…………………………………………..9
5 Trouble Shooting Chart……………………………………..…….10
6 Replacement Parts List…………………………………………….11
7 Packing Instruction……………………………………………….…12
Follow caution information wherever you see this symbol.
1 Specifications
MODEL
VHS01A17Z0A
POWER SOURCE
21.6V DC
RATED POWER
140W（含地刷电机 30W）
BATTERY CAPACITY
2000mAh
MAX. VACUUM
CAPACITY
6.0kPa
RUNNING TIME
≥12 min
RECHARGING TIME
3.5hrs
DUST CAPACITY
0.3L
WEIGHT(MAIN BODY)
2.58kg
DIMENSION(WxLxH)
243.4*181*1110mm
Charging base
No
Tools
Furniture Brush(2 in 1 tool), Crevice Tool
ATTACHMENTS
/
/
/

2 Electrical Diagrams
主控板原理图
电池保护板原理图

3 Schematic Diagrams
4 Repairs of Main Parts
4.1 Upper and Lower Body
Detach the parts
1. Discharge the power brush from the connection tube (Fig1), and removes the connecton tube
from the unit body(Fig2).
2. Detach the battery package from the unit body(Fig3), and rotate the motor upper cover and
lift the cover and filter out from the body(Fig4).
Fig2
Fig1

3. Rotate the cup, and take the dust cup out from body(Fig5);
4. Rotate the inner separator, and take the inner separator out from body (Fig6)
5. Discharge the screws and take out the PCB assy cover from unit body (Fig7) , and take the PCB
assy out from unit body (Fig8)
6. Disassemble the handle assy from the unit body(Fig 9), discharge the screws and finally
take out the DC motor from separator frame assy(Fig 10).
Fig3
Fig4
Fig6
Fig5
Fig7
Fig8
Fig8
Fig9

Assembly
1. Assemble the motor , motor frame into separator with screws, and fix the upper cup assy with
separator assy(Fig 11).
2. Assemble the PCB assy and PCB board cover to handle assy (Fig 12). Asseble the handle assy
with upper cup assy（Fig 13）
3. Assemble the dust cup to upper cup with handle assy(Fig 14). And Assemble the HEPA to upper
cup with handle assy (Fig 15).
4. Close the cover (Fig.16), and fix the battery pack to unit body (Fig.17)
Fig11
Fig12
Fig13
Fig14
Fig15
Fig16
Fig17

5. Connect the unit body with tube (Fig18), and tube with power brush(Fig 19)
5 Trouble Shooting Chart
Trouble
Possible Causes
Countermeasure
The vacuum cleaner does
not work, or power brush
does not work
1.The plug is not plugged in
2. The power switch didn’t open.
3.Internal wiring of loose
4.The motor burned out
5. Power brush broken
1.Re plug
2.Press the power switch
3.Re connect the internal
wiring
4.Repair or replacement of the
new machine
5. Check out if there is light
comes out from LED of power
brush
The suction become
smaller
1. No power of the battery pack
2. The channel blocked suction
head
3. Poor ventilation dust bag
4. Air inlet and
outlet filter blocked
5. Motor problems
1. Recharge the unit till battery
is full
2. Clean the suction
head channel
3.Clean up the dust bag
4.Cleaning filter
5. Repair replacement of
the motor
Full dust indicator of
adverse action
1. The dust suction channel block
2. The buoy stuck
3. Spring is broken
1.Clean up the dust absorption
channel
2. Repair full dust indicator
3. Repair full dust indicator
6 Replacement Parts List
（For basic model only）
No.
Part Name
Part Code
Specs.
QTY
1
Power brush
2
Stretch Metal tube
3…
Battery Pack
Fig18
Fig19

4
Separator
5
Bottom Cup
6
Upper Cup cover assy
7
PCB Cover
8
Mai PCB
9
Handle Assy
10
Upper cup Assy
11
Motor Assy
Please refers to SBOM for customer model.
7 Packing Instructions