Midea M7 User manual

ROBOT VACUUM CLEANER
Please review this instruction manual before operating and keep it properly.
ROBOT VACUUM CLEANER
M7/M7 Pro

STRUCTURE OF THE PRODUCT
SAFETY INSTRUCTIONS
PRODUCT OPERATION
CONTENTS
01
03
03
03
03
06
06
07
07
08
09
10
11
12
12
12
13
14
14
15
MAINTENANCE
16
FAQs
Technical data
Warning
Safety Instructions
Assembly and parts description
Parts list
01
01
Function Of Buttons
Start/Pause/Shut Down
Start/Pause/Shut Down
Recharge
Reset
Cleaning the Side Brush
Cleaning the Dustbin, Sponge and Filter
Cleaning the Water Tank
Cleaning the Sensor and Wheel
Cleaning the Charge Terminal
Cleaning the Brushroll
Installing the Side Brushes
Charging Robot Vacuum
Cleaning
Mopping
Using APP
M-smartLife App Quick Guide
06
06
06
06

01 02
STRUCTURE OF THE PRODUCT
Mop Cloth x1
Side Brush x2 Pairs HEPA Filter x1
Charging Base x1
Assembly and parts description
Parts list
Recharge
Cover
Anti-Collision Bumper
Start / Pause
Navigation
Module
Water Tank
Networking
Button
Reset Button
Dustbin
Water Tank
Release Button
Cleaning
Brush
Dustbin
Release Button
Manual
Manual x1
Cleaning Brush x1Mop Cloth Holder x1 Power Cable x1 Vibration Mopping
Assembly x1
only for M7 Pro

SAFETY INSTRUCTIONS
Technical data
Charging Base Model: M7-DS
Charging Base Input: 100-240V~,50-60Hz,38W
Charging Base Output: 16.9V ,2A
Battery Model:BP14452A 4ICR 19/65-2
Battery Rated Voltage: 14.4V
Battery Capacity: 5200mAh 74.88Wh
1
2
3
4
5
6
1
2
3
4
5
6
7
8
9
10
11
12
Warning
Charging Base is only applicable to the product M7/M7 Pro
Children shall not play with the appliance
Cleaning and user maintenance shall not be made by children without
supervision
Before charging, read the instructions.
For indoor use only, do not expose to water.
During charging, the appliance must be placed in a well-ventilated area.
If the cable is damaged, it should be replaced by the manufacturer, its
service agent or qualified persons.
The battery charger is designed for charging the rechargeable battery
provided by manufacturer.
Do not operate the appliance which has a damaged output cord or parts
or plug.
Do not exceed the manufacturer’s specifications when in use.
Always unplug the appliance when not in use for a long time.
No objects filled with liquids, such as vases, shall be placed on the
appliance.
Safety instructions
When using an electrical appliance, basic precautions should always be
followed, including the following:
READ ALL THE INSTRCUTIONS BEFORE USING.
Failure to follow the warnings and instructions may result in electric shock,
fire and/ or serious injury.
WARNING- To reduce the risk of fire, electric shock, or injury:
Do not use outdoors or on wet surfaces.
Do not allow to be used as a toy. Close attention is necessary when
used by or near children, pets or plants.
Use only as described in this manual. Use only manufacture's
recommended attachments.
Do not use with damaged cord or plug. If appliance or charging base
is not working as it should have been, been dropped, damaged, left
outdoors, or dropped into water, please go to service center for solutions.
1.
2.
3.
4.
Do not pull or carry by cord, use cord as a handle, close a door on cord,
or pull cord around sharp edges or corners. Do not run appliance over
cord. Keep cord away from heated surfaces.
Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
Do not handle charger, including charger plug, and charger terminals
with wet hands.
Do not put any objects into openings. Do not use with any opening
blocked; keep free of dust, lint, hair, and anything that may reduce air flow.
Keep hair, loose clothing, fingers, and all parts of body away from
openings and moving parts.
Do not pick up anything that is burning or smoking, such as cigarettes,
matches, or hot ashes.
Do not use without dustbin and /or filters in place.
Disconnect the battery pack from the appliance before making any
adjustments, changing accessories, or storing appliance. Such preventive
safety measures reduce the risk of starting the appliance accidentally.
Only qualified and authorized service center can disassemble the
appliance for battery.
Recharge only with the charger specified by the manufacturer. A charger
that is suitable for one type of battery pack may create a risk of fire
connecting with another battery pack.
Use appliance only with specifically designated battery packs. Use of
any other battery packs may create a risk of injury and fire.
When battery pack is not in use, keep it away from other metalobjects,
like paper clips, coins, keys, nails, screws or other metal objects that can
make a connection from one terminal to another.Shorting the battery
terminals together may cause burns or a fire.
Under abusive conditions, liquid may be ejected from the battery; avoid
contact. If contact accidentally occurs, flush with water. If liquid contacts
eyes, additionally seek medical help. Liquid ejected from the battery may
cause irritation or burns.
Do not use a battery pack or appliance that is damaged or modified.
Damaged or modified battery may exhibit unpredictable behavior resulting
in fire, explosion or risk of injury.
Do not expose a battery pack or appliance to fire or excessive temperature.
Exposure to fire or temperature above 130°C may cause explosion.
Do not use and store in extremely hot or cold environments (below 4°C
or above 40°C). Please charge the robot in temperature above 4°C and
below 40°C.
Follow all charging instructions and do not charge the battery pack or
appliance outside the temperature range specified in the instructions.
Charging improperly or at temperatures outside the specified range
may damage the battery and increase the risk of fire.
Having service performed by a qualified repair person using only
identical replacement parts.This will ensure that the safety of the product
is maintained.
Do not modify or attempt to repair the appliance or the battery pack
except as indicated in the instructions for use and care.
Place the cords out of the areas to be cleaned.
Do not operate the vacuum in a room where an infant or child is sleeping.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
0403

06
PRODUCT OPERATION
Recharge Button
Wi-Fi Networking
Reset
Start/Pause/
Shut Down
Start/Pause/Shut Down
Wi-Fi networking
Recharge
Start:Press and hold for 3s to hear a startup voice then the machine turns on.
Pause:Press one time and the machine will stop. Press again, the machine will
start work again.
Shut Down:Please help to remove the machine from the charging base then
press and hold for 3s to hear a shutdown voice and the machine will turn off.
Press for 3 seconds for Wi-Fi matching. Robot is in matching status
if light is flickering.
Short press for recharging.
SAFETY
WARNING
05
Do not operate the vacuum in an area where there are lit candies or fragile
objects on the floor to be cleaned.
Do not operate the vacuum in a room that has lit candles on furniture
that the vacuum may accidently hit or bump into.
Do not allow children to sit on the vacuum.
Do not use the vacuum on a wet surface.
Do not use the Charging base if it is damaged.
Turn off the power switch before cleaning or maintaining the appliance.
The plug must be removed from the receptacle before cleaning or
maintaining the Charging base.
Remove the appliance from the Charging base and turn off the power
switch before removing the battery for disposal of the appliance.
If the robot will not be used for a long time, fully charge the robot and
power OFF for storage and unplug the charger.
For use only with M7 and M7 Pro Charging base.
This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety. Cleaning and
user maintenance shall not be made by children without supervision.
Do not pour water or liquid on the appliance. It could increase the
risk of Breaking apart or fire.
Do not use the appliance near a heater or combustible materials.
Do not use the appliance near fire or flame such as a movable heater, a
candlelight, a desk lamp, a fireplace etc. or in a place where combustible
materials such as gasoline, alcohol, thinner etc. exist.
Make sure there are no dangerous objects around the the appliance’s
cleaning area to prevent collision and unplug any electric heaters or fans.
Do not use robot on black colored floors, the robot may not be able to
operate normally.
25.
26.
27.
28.
29.
30.
31.
32.
33.
34.
35.
36.
37.
38.
39.
Function of Buttons
Reset
Press "Reset" to restart the robot when it is out of work.

07 08
1
2
3
4
5
1
Turn the unit over.
With unit upside down, align side brush
over brush post. Please keep the color of
side brushes' same as each brush post's.
Press down side brush until it snaps in
place.
Ensure side brushes can rotate freely.
Reference to fig1
Put the charging base well:
P l a c e t h e ch arg ing b a se
against a wall and remove all
of obstructions around the
charging base, as shown in the
figure below.
Please do not place the charging
base on a carpet and keep the
area dry.Also help to remove the
mopping holder when it is
charging.
1.5M
1.5M
1.5M
1.5M
2Turn the power switch on.
Installing the Side Brushes
fig1
Charging Robot Vacuum
Start / Pause
3Place vacuum on the charging base,
ensuring the charging contacts are
touching. A white light will start flashing,
indicating the robot is charging. Charge
for 12 hours before first use.
To effectively extend battery life, you should:
1 Please charge before first use;
2 When the battery is low power, please charge it as soon as possible;
3 If you do not use the appliance for an extended period of time, fully charge the battery
and put it in a ventilated and dry place;
4 Charge the robot every 3 months if it is not used for a long time to protect battery;
5 This machine has automatic recharge function. In some special cases (such as battery is
dead, the machine is stuck, etc.), the main unit may not be able to automatically recharge.
Cleaning
Do not use your robot on wet surfaces or surfaces with standing water. Before using
the product on a rug with tasseled edges,please fold the rug edges under.
1
Please clean up the wires and sundries scattered on the ground and remove
valuable, frogile items that are easy to fall before cleaning.
If there is a suspended environment in the clean area, please use objects to
fix and block to avoid any potential harm.
It is recommended to follow the sweeping robot to find some possible
problems during the first cleaning process. The robot can clean much more
smoothly after that. If certain special areas do not need to be cleaned or the
robot may be trapped, you can add a restricted area or virtual wall on the
map in the APP to prevent the robot from entering the above special area.

a. Please do not fill the water more than the "Max" level.
b. It is recommended to use clean water in the water tank. Do not use any detergent in the water.
c. Please clean the mopping cloth after cleanning.
d. You will hear a click sound when the water tank is installed properly.
e. Move the mopping holder when the robot is under charging.
f . Please set virtual wall by APP or roll up the carpet if you don't want the robot go on your
carpet operating mopping.
g. Please adjust water flow by APP according to your requirement.
Mopping
1Attach mopping cloth to the
mopping holder.
2Press the button on tank and
pull to remove.
3Fill the Water. 4Attach mopping holder to the
water tank.
Water inlet/outlet
5Re-insert the water tank
assembly into the vacuum.
6Press ‘‘ ’’ to start mopping.
Water Tank
Mop Cloth Holder
Mop Cloth
Register and login
personal account
Using APP
If your home WiFi name or password is changed, you will need to re-establish connection with
your robot vacuum.
App supports iOS 9.0 and above, Android 6.0 and above phone system versions, but
Pad device is not accepted; generally the phone system version may be checked by
clicking “Settings-About Mobile Phone” in the mobile phone.
This model does not support WEP encrypted router;
The network accessing configuration of the cleaner requires WiFi network of 2.4GHz
frequency range,5GHz frequency range is not currently compatible;
Do not configure network accessing under the charging state;
WiFi is mandatory for network accessing configuration of the cleaner; once the network
accessing is configured successfully, App may be operated in WiFi/2G/3G/4G network
environment and the cleaner may be controlled remotely;
If your home WIFI password is changed, the cleaner will be displayed off-line on App;
Without any changes of App account number, one just needs to configure network
accessing for the cleaner once again;
If others want to use App to operate same cleaner, they need be invited on App by the
device owner by sharing the device to the new user's account (on the condition that
the invitee has downloaded App and registered an account);
The device will be removed from the former device owner's device list if a new account
owner connect the device successfully;
Once the cleaner is configured successfully network accessing, the following operations
will result in clearance of WiFi settings and secondary network accessing configuration
is required; Long press the network accessing configuration key on the device over 3
seconds and after a tick sound is heard, all Wi-Fi information will be cleared;
Ensure mobile phone is connected to your home WiFi.
Download the MSmartLife app and register your vacuum:
a. Scan the QR code or search for the MSmartLife
app in the Apple or Google Play store. Download
the app.
b. Open the app and create your personal account.
Follow instructions on the screen.
Add your robot vacuum to your app
Connect your robot to your WiFi
1
2
3
4
WiFi
Press the " + " button on the main screen of the app and
select VCR09B from the available list of products.
Add Equipment
After assembling and powering on the robot, press and
hold down the “WiFi” button for 3 seconds until a beep is
heard. The WiFi indicator light should start to flicker.
Follow instructions on app for next steps.
Once the network access is configured successfully, you will be the owner of this cleaner
and can operate your intelligent cleaner by accessing to cleaner operating interface.
09 10

M-smartLife App Quick Guide
Back to
previous page
Remaining
power
Signal
Strength
Select
suction mode
Smart
cleaning
Robot
settings
Edit map
Reset map
Mute
Manually
control the robot
Cleaning time
Select
water flow speed
More
cleaning mode
Recharge
If the Wi-Fi in your home is unstable, it may cause a certain delay in the related
operations of the M-Smart App. (The content of the MSmartLife App is subject to change
with the product technology update. Please refer to the MSmartLife interface for details).
MAINTENANCE
Cleaning the Side Brush
1
2
3
4
Regularly check the side brush for hair wrapping.
Clean the side brush with the cleaning tool or a rag.
If the side brush has deformed from hair wrap,remove the side brush
by pulling it off the vacuum and place. it in warm water for 5 seconds.
If the side brush is permanently damaged, replace with the spare set of
brushes.
1 Press dust cup release button to
remove dust cup from robot.
Dust Bin Release Button
Cleaning the Dustbin, Sponge and Filter
Empty the dustbin after each use.
2 Press dustbin release button to
empty into a trash bin.
Dustbin
Release Button
11 12

3Open the cover and pour out the remaining
water in the water tank.
4Wipe dry the water tank.
Exposure to sunlight is not recommended.
1
Cleaning the Water Tank
Once finished mopping, press the water tank release button and pull to
remove the water tank. Detach the mop holder by pulling them apart.
2Wash the mopping pad and dry THOROUGHLY
Cleaning the Sensor and Wheel
Wipe the sensor and wheels gently with a soft cloth, as shown in the right figure.
Cleaning the Charge Terminal
Wipe the charging terminals on both the robot and charging dock with a soft
cloth, as shown in the right figure.
3 HEPA filter is on the side of dust
cup.Please keep HEPA and sponge
totally dry before using.
4Have dust cup inserted back to robot.
13 14

Cleaning the Brushroll
Pull the middle area of brush roll to take part it.
1
Brush roll can be apart by pulling its middle part.Then you can clean threads
or hair wrapped around the brush roll by scissors or included brush cleaner.
2
Remove hair from
the brush
If side brushes are curled, you can remove them and place in warm water for 30 seconds
and then let it thoroughly dry. Also regularly use the brush cleaner to remove dust, debris
and hair from the side brushes. Brushroll frame can also be removed and cleaned but
lifting out. When put it back, make sure the side with the rubber flap is on the closest
side to the dustbin.
Every time when you empty your dust cup, please clean your filter at the same time.
FAQs
In case of malfuntion, please refer to the following table.
Problem Possible reason Solution
The appliance will
not be charged
The power switch is not
turned on while charging.
The appliance and charging
terminals are not in full
contact.
Power on the appliance.
Make sure the appliance is fully
in contact with the charging
terminal.
The appliance gets
stuck
The appliance is covered
by wires on the ground,
drooping curtain fabric or
blankets are twined.
Side brush and brushroll,
etc. get stuck, and the
appliance cannnot run
normally.
The appliance will automatically
start the escape mode. If it is
not out of trouble, it needs
manual help.
Clean the windings on the side
brush and restart it. If not, contact
the post-salesdepartment.
Not cleaned
completely,
and recharge it
The appliance does not
have enough battery
power.
Charge the appliance.
No cleaning
according
to the preset time
The power switch is not on.
Scheduled appointment is
cancelled.
Turn on the power switch of
appliance.
Reset and make appointment.
After the mop
holder is installed,
the appliance
is impermeable
The mop holder magnet
falls off.
There’s no water in water tank.
The appliance base outlet
hole is blocked.
Contact the aftersales service
center.
Add water.
Clear water outlet and tank filter.
The appliance has
missed sweeps,
there is no plan for
cleaning, and the
map in app shows
irregularly
The ground is slippery.
Wires, shoes and other
obje cts placed on the
ground , affecting the
normal operation of the
appliance.
Cleaning is interrupted
halfway.
If the floor is waxed, dry it
before use.
Minimize ground items as much
as possible.
Do n ot move o r blo ck t he
appliance during work.
Appliance does not
work
The power switch is not
turned on.
Low battery.
Wheels are dropped and
the three groups of drop
sensors are in a falling state.
Turn on the power switch.
Charge the appliance.
Place the appliance close to
the ground.
Contact post-sales service center.
Appliance retreats
There is a obstacle ahead.
Bumper rail is clamped.
Clear the front obstacles.
Tap the bumper rail to check
for if there is foreign matter stuck.
15 16

In case of malfunction, please refer to the following table.
Problem Troubleshooting
Cause Solution
App displays
disconnection
Disconnection
between the
mobile phone
and the
appliance
Slow App
operation
Network
connection
is not so
smooth
The QR code
of the mobile
phone itself
cannot be
scanned by
App.
The hardware
configurations
of the mobile
phone are very
low, the camera
has no focus
function.
Judge if the mobile
phone is accessed
to network;
Judge if the router
works normally;
Thecleanerisrequired
to be powered;
The WiFi
configurations of
the equipment are
cleared;
The WiFi password
or network is changed.
Network busy;
Poor WiFi signal
reception of the
mobile phone;
The network
bandwidth is
not so adequate.
Change mobile
phones for
confirmation;
The mobile phone shall
be accessed to network
once again;
Re-start the router;
Power on the cleaner once
again;
Add new appliances into
App;
After system start-up, long
press “WiFi” 3 seconds
andrelease it after a tick
soundis heard;clear all
WiFi configurations of
t h e cleaner and add
household electrical
appliances once again for
operation.
Re-start the router and
reduce the number of
access users;
Check the settings of the
mobile phone itself;
Broaden network
bandwidth.
Change mobile phones
and scan;
Add appliance by product
category.
This marking indicates that this product should not be disposed with other
household wastes throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To return
your used device, please use the return and collection systems or contact
the retailer where the product was purchased.
They can take this product for environmental safe recycling.
2400-2483.5MHz, WIFI MAX RF POWER: 20 dBm,
BLUETOOTH MAX RF POWER: 10 dBm
Correct Disposal of this product
17
JiangsuMideaCleaningAppliancesCo.,Ltd
DeclarationofConformity(DoC)
M7-001
We JiangsuMideaCleaningAppliancesCo.,Ltd.
No.39CaohuAvenue,XiangchengEconomicDevelopmentZone,Suzhou,Jiangsu,
China
responsibilitythattheproduct:
tradename：Midea
typeormodel：M7/M7 Pro
towhichthisdeclarationrelatesisinconformitywiththeessentialrequirementsand
otherrelevantrequirementsoftheDirective:
2014/53/EU 2011/65/EU (EC)No1907/2006
The productis in conformitywiththe followingstandardsand/orothernormative
documents:
2014/53/EU:EN60335-2-2:2010+A11:2012+A1:2013
EN60335-1:2012+A11:2014+AC:2014+A13:2017+A1:2019+A14:2019+A2:2019
EN62311:2008 EN62233:2008
EN 301 489-1 V2.2.3 EN 301 489-17 V3.2.4 EN 55014-1:2017 EN 55014-2:
2015
ENIEC61000-3-2:2019 EN61000-3-3:2013+A1:2019 EN300328V2.2.2
2011/65/EU:EN62321-1:2013 EN62321-2:2014 EN62321-3-1:2014
EN62321-4:2014EN62321-5:2014 EN62321-6:2015 EN62321-7-1:2015
EN62321-7-2:2017 EN62321-8:2017
Supplementaryinformation:
Technicalfileheldby:JiangsuMideaCleaningAppliancesCo.,Ltd.
Placeanddateofissue(ofthisDoC):CHINA 2021-3-1
Signedbyorforthemanufacturer
(Signatureofauthopisedperson)
Name(inprint):Shawn.yan
Title:QualityManager
Unique identification of this DoC:
product name：Robot Vacuum Cleaner