Mindray uMEC10 User manual

uMEC10/uMEC12/uMEC15
Patient Monitor
Operator’s Manual

I
© Copyright 2016 Shenzhen Mindray Bio-Medical Electronics Co., Ltd. All rights reserved.
For this Operator’s Manual, the issue date is 2016-1.
WARNING
zFederal Law (USA) restricts this device to sale by or on the order of a physician.

II
Intellectual Property Statement
SHENZHEN MINDRAY BIO-MEDICAL ELECTRONICS CO., LTD. (hereinafter called
Mindray) owns the intellectual property rights to this Mindray product and this manual.
This manual may refer to information protected by copyrights or patents and does not
convey any license under the patent rights of Mindray, nor the rights of others.
Mindray intends to maintain the contents of this manual as confidential information.
Disclosure of the information in this manual in any manner whatsoever without the written
permission of Mindray is strictly forbidden.
Release, amendment, reproduction, distribution, rental, adaption and translation of this
manual in any manner whatsoever without the written permission of Mindray is strictly
forbidden.
, , and are the registered trademarks or trademarks owned
by Mindray in China and other countries. All other trademarks that appear in this manual
are used only for editorial purposes without the intention of improperly using them. They
are the property of their respective owners.

III
Responsibility on the Manufacturer
Party
Contents of this manual are subject to changes without prior notice.
All information contained in this manual is believed to be correct. Mindray shall not be
liable for errors contained herein nor for incidental or consequential damages in connection
with the furnishing, performance, or use of this manual.
Mindray is responsible for the effects on safety, reliability and performance of this product,
only if:
all installation operations, expansions, changes, modifications and repairs of this
product are conducted by Mindray authorized personnel;
the electrical installation of the relevant room complies with the applicable national
and local requirements;
the product is used in accordance with the instructions for use.
WARNING
zThis equipment must be operated by skilled/trained clinical professionals.
zIt is important for the hospital or organization that employs this equipment to
carry out a reasonable service/maintenance plan. Neglect of this may result in
machine breakdown or personal injury.

IV
Warranty
THIS WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER WARRANTIES,
EXPRESSED OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY
OR FITNESS FOR ANY PARTICULAR PURPOSE.
Exemptions
Mindray's obligation or liability under this warranty does not include any transportation or
other charges or liability for direct, indirect or consequential damages or delay resulting
from the improper use or application of the product or the use of parts or accessories not
approved by Mindray or repairs by people other than Mindray authorized personnel.
This warranty shall not extend to
Malfunction or damage caused by improper use or man-made failure.
Malfunction or damage caused by unstable or out-of-range power input.
Malfunction or damage caused by force majeure such as fire and earthquake.
Malfunction or damage caused by improper operation or repair by unqualified or
unauthorized service people.
Malfunction of the instrument or part whose serial number is not legible enough.
Others not caused by instrument or part itself.

V
Customer Service Department
Manufacturer: Shenzhen Mindray Bio-Medical Electronics Co., Ltd.
Address: Mindray Building, Keji 12th Road South, Hi-tech industrial
park, Nanshan,Shenzhen 518057,P.R.China
Website: www.mindray.com
E-mail Address: [e-mail]
Tel: [phone]
Fax: [phone]
EC-Representative: Shanghai International Holding Corp. GmbH(Europe)
Address: Eiffestrae 80, 20537 Hamburg, Germany
Tel: [phone]
Fax: [phone]

VI
Preface
Manual Purpose
This manual contains the instructions necessary to operate the product safely and in
accordance with its function and intended use. Observance of this manual is a prerequisite
for proper product performance and correct operation and ensures patient and operator
safety.
This manual is based on the maximum configuration and therefore some contents may not
apply to your product. If you have any question, please contact us.
This manual is an integral part of the product. It should always be kept close to the
equipment so that it can be obtained conveniently when needed.
Intended Audience
This manual is geared for clinical professionals who are expected to have a working
knowledge of medical procedures, practices and terminology as required for monitoring of
critically ill patients.
Illustrations
All illustrations in this manual serve as examples only. They may not necessarily reflect the
setup or data displayed on your patient monitor.
Conventions
Italic text is used in this manual to quote the referenced chapters or sections.
[ ] is used to enclose screen texts.
 is used to indicate operational procedures.

1
Content
1 Safety................................................................................................................................. 1-1
1.1 Safety Information ...................................................................................................... 1-1
1.1.1 Warnings............................................................................................................. 1-2
1.1.2 Cautions ............................................................................................................. 1-3
1.1.3 Notes .................................................................................................................. 1-3
1.2 Equipment Symbols .................................................................................................... 1-4
2 The Basics ......................................................................................................................... 2-1
2.1 Monitor Description .................................................................................................... 2-1
2.1.1 Intended Use....................................................................................................... 2-1
2.1.2 Applied Parts ...................................................................................................... 2-1
2.2 Front View................................................................................................................... 2-2
2.3 Side View .................................................................................................................... 2-4
2.3.1 uMEC10 ............................................................................................................. 2-4
2.3.2 uMEC12/uMEC15 ............................................................................................. 2-5
2.4 Rear View.................................................................................................................... 2-6
2.5 Display Screen ............................................................................................................ 2-7
2.6 QuickKeys................................................................................................................... 2-9
3 Basic Operations .............................................................................................................. 3-1
3.1 Installation................................................................................................................... 3-1
3.1.1 Unpacking and Checking ................................................................................... 3-1
3.1.2 Environmental Requirements............................................................................. 3-2
3.2 Getting Started ............................................................................................................ 3-3
3.2.1 Turning Power On .............................................................................................. 3-3
3.2.2 Starting Monitoring ............................................................................................ 3-3
3.3 Disconnecting from Power.......................................................................................... 3-4
3.4 Using Keys.................................................................................................................. 3-4
3.5 Using the Touchscreen ................................................................................................ 3-5
3.6 Setting the Screen........................................................................................................ 3-5
3.7 Using the On-screen Keyboard ................................................................................... 3-6
3.8 Using the Main Menu.................................................................................................. 3-7
3.9 Changing General Settings.......................................................................................... 3-8
3.9.1 Setting up a Monitor........................................................................................... 3-8
3.9.2 Changing Language ........................................................................................... 3-8
3.9.3 Adjusting the Screen Brightness ........................................................................ 3-8
3.9.4 Showing/Hiding the Help................................................................................... 3-9
3.9.5 Setting the Date and Time .................................................................................. 3-9
3.9.6 Adjusting Volume............................................................................................... 3-9
3.10 Setting Parameters................................................................................................... 3-10
3.10.1 Switching the Parameters On/Off................................................................... 3-10

2
3.10.2 Accessing the Parameters Menu......................................................................3-11
3.11 Operating Modes ......................................................................................................3-11
3.11.1 Monitoring Mode ............................................................................................3-11
3.11.2 Night Mode .....................................................................................................3-11
3.11.3 Privacy Mode ................................................................................................. 3-12
3.11.4 Demo Mode.................................................................................................... 3-13
3.11.5 Standby Mode ................................................................................................ 3-13
4 Managing Patients............................................................................................................ 4-1
4.1 Discharging a Patient .................................................................................................. 4-1
4.1.1 Auto Discharging a Patient after Monitor Power Off......................................... 4-1
4.1.2 Manually Discharging a Patient ......................................................................... 4-2
4.2 Admitting a Patient...................................................................................................... 4-2
4.2.1 Auto Admitting a Patient .................................................................................... 4-2
4.2.2 Manually Admitting a Patient ............................................................................ 4-3
4.3 Managing Patient Information .................................................................................... 4-3
4.3.1 Editing Patient Information................................................................................ 4-3
4.3.2 Querying and Obtaining Patient Information..................................................... 4-3
4.3.3 Associating Patient Information ......................................................................... 4-4
4.4 Transferring Patient Data via USB Drive.................................................................... 4-4
4.4.1 Transferring Data from the Monitor to a USB Drive ......................................... 4-5
4.4.2 Viewing Data on the Monitor via USB Drive .................................................... 4-5
4.4.3 Transferring Data from the USB Drive to Monitor............................................ 4-6
4.5 Connecting to a Central Monitoring System............................................................... 4-7
5 Managing Configurations................................................................................................ 5-1
5.1 Introduction................................................................................................................. 5-1
5.2 Entering the [Manage Configuration] Menu ............................................................... 5-2
5.3 Setting Default Configuration ..................................................................................... 5-2
5.4 Saving Current Settings............................................................................................... 5-3
5.5 Editing Configuration.................................................................................................. 5-3
5.6 Deleting a Configuration............................................................................................. 5-4
5.7 Transferring a Configuration....................................................................................... 5-5
5.8 Loading a Configuration ............................................................................................. 5-5
5.9 Restoring the Latest Configuration Automatically...................................................... 5-6
5.10 Modifying Password ................................................................................................. 5-6
6 User Screens...................................................................................................................... 6-1
6.1 Tailoring Your Screens ................................................................................................ 6-1
6.1.1 Changing the Wave Line Size ............................................................................ 6-1
6.1.2 Changing Measurement Colors.......................................................................... 6-1
6.1.3 Changing Screen Layout .................................................................................... 6-1
6.2 Viewing Minitrends..................................................................................................... 6-2
6.2.1 Having a Split-Screen View of Minitrends ........................................................ 6-2