MIRKA Random Orbital Sander User manual

Random Orbital Sander
125 mm (5 in.) & 150 mm (6 in.)
English Operating Instructions 1-10
Deutsch Betriebsanleitung 11-21
Français Notice d´utilisation 22-32
Italiano Istruzioni sull´uso 33-43
Svensk Bruksanvisning 44-54
Suomi Käyttöohje 55-65
Español Instrucciones de manejo 66-76
Nederlands Gebruiksaanwijzing 77-87
Русский Руководство по эксплуатации 88-98
KWH Mirka Ltd
FIN-66850 JEPPO
Finland
Tel: [phone]
[e-mail]
Mirka Abrasives, Inc.
7950 Bavaria Road
Twinsburg, Ohio 44087
USA
Tel. [phone]
Mirka Slipmaterial AB
Blekegatan 4
S-65221 Karlstad
Sweden
Tel. + 46-54-690950
[e-mail]
Mirka Abrasives Ltd
Unit 7
Holdom Avenue , Bletchley
Milton Keynes MK1 1QU
Great Britain
Tel. [phone]
[e-mail]
Mirka Abrasifs s.a.r.l.
Immeuble Atria
2, Allée Bienvenue
F-93885 Noisy le Grand Cedex
France
Tel. [phone]
[e-mail]
Mirka Schleifmittel GmbH
Niederhöchstädter Str. 71–73
D-61476 Kronberg Ts.
Germany
Tel. [phone]
[e-mail]
Mirka Italia s.r.l
Via Toscana, 20
62014 Corridonia–Macerata
Italy
Tel. [phone]
[e-mail]
KWH Mirka Iberica, S.A.
C/Industria 16-18
08740 Sant Andreu de la
Barca (Barcelona)
Spain
Tel. + 34 93 682 09 62
KWH Mirka Ltd
Branch Office
10 Anson Road
#28-05A International Plaza
Singapore 079903
Tel. [phone]
KWH Mirka Mexicana S.A. de C.V.
Boulevard Atlixcayotl No. 5506, Piso 5
Entre Kepler y Avenida del Sol
Reserva Territorial Atlixcayotl
Puebla, Puebla, C.P. 72190
Mexico.
Tel. [phone]
KWH Mirka Ltd.
(Shanghai Representative Office)
Suite 1906A, Shenergy International
Building 1 Fuxing Rd(M),
Shanghai 200021 China
Tel: [phone]
[e-mail]
Mirka Brasil Ltda.
Av.Ver. José Diniz, 3725 cj.32 – Campo Belo
São Paulo – SP
04603-004 Brasil
Phone: [phone]
Fax: [phone]
www.mirka.com
Operating Instructions
Random Orbital Sander
MIRKA®
125 mm (5 in.) & 150 mm (6 in.)

2
MIRKA 12,000 RPM
125 mm (5 in.) & 150 mm (6 in.)
RANDOM ORBITAL SANDERS
The warranty terms are as follows:
- 12 months on KWH MIRKA air tools.
- 3 months on tool parts repaired by KWH MIRKA.
The warranty period commences at the date of purchase. The warranty only covers imputable material and manu-
facturing defects.
Parts replacement or repair during the warranty period is free of charge if carried out by an ofcial KWH MIRKA
service center.
Freight costs are always to be paid by the purchaser.
The warranty does not include normal wear and tear, overloading or improper use. The warranty only covers the
local repair, not the tool replacement.
Compensation for downtime and loss of production are explicitly not included in the warranty.
Repair claims under warranty will only be honored if the tool is returned in its original assembled state. Any disas-
sembly will void the warranty.
The warranty can only be submitted to the dealers where the tool was purchased.
Warranty

1
1) General Industry Safety & Health Regulations, Part 1910,
OSHA 2206, available from: Superintendent of Documents;
Government Printing Ofce; Washington DC 20402
2) Safety Code for Portable Air Tools, ANSI B186.1 available from:
American National Standards Institute, Inc.; 1430 Broadway;
New York, New York 10018
3) State and Local Regulations.
This sander is designed for sanding all types of materials i.e.
metals, wood, stone, plastics, etc. using abrasive designed for this
purpose. Do not use this sander for any other purpose than that
specied without consulting the manufacturer or the manufac-
turer’s authorized supplier. Do not use back-up pads that have a
working speed less than 12,000 RPM free speed.
The tool is intended to be operated as a hand held tool. It is
always recommended that the tool be used when standing on a
solid oor. It can be in any position but before any such use, the
operator must be in a secure position having a rm grip and foot-
ing and be aware that the sander can develop a torque reaction.
See the section “Operating Instructions”.
Closed Loop Pipe System
Sloped in the direction of air flow
Drain Leg
Ball Valve
To Tool Station
Filter
Drain Valve
Regulator
Lubricator
Ball
Valve
Ball Valve Air Flow
Air Dryer
Air Compressor
and Tank
Air Hose
To Coupler
at or near Tool
Please Read and Comply with Putting the Tool into Service
Operating Instructions
Use a clean lubricated air supply that will give a measured air
pressure at the tool of 6.2 bar (90 psig) bar when the tool is run-
ning with the lever fully depressed. It is recommended to use an
approved 10 mm (3/8 in.) x 8 m (25 ft) maximum length airline. It
is recommended that the tool be connected to the air supply as
shown in Figure 1.
Do not connect the tool to the airline system without incorporating
an easy to reach and operate air shut off valve. The air supply
should be lubricated. It is strongly recommended that an air lter,
regulator and lubricator (FRL) be used as shown in Figure 1 as
this will supply clean, lubricated air at the correct pressure to
the tool. Details of such equipment can be obtained from your
supplier. If such equipment is not used then the tool should be
manually lubricated
To manually lubricate the tool, disconnect the airline and put 2 to
3 drops of suitable pneumatic motor lubricating oil such as Fuji
Kosan FK-20, Mobil ALMO 525 or Shell TORCULA® 32 into the
hose end (inlet) of the machine. Reconnect tool to the air supply
and run tool slowly for a few seconds to allow air to circulate the
oil. If the tool is used frequently, lubricate it on a daily basis or
lubricate it if the tool starts to slow or lose power.
It is recommended that the air pressure at the tool is 6.2 bar (90
psig) while the tool is running. The tool can run at lower pressures
but never higher than 6.2 bar (90 psig).
1) Read all instructions before using this tool. All operators must be fully trained in its use
and aware of these safety rules. All service and repair must be carried out by trained
personnel.
2) Make sure the tool is disconnected from the air supply. Select a suitable abrasive and
secure it to the back-up pad. Be careful and center the abrasive on the back-up pad.
3) Always wear required safety equipment when using this tool.
4) When sanding always place the tool on the work then
start the tool. Always remove the tool from the work
before stopping. This will prevent gouging of the work
due to excess speed of the abrasive.
5) Always remove the air supply to the sander before t-
ting, adjusting or removing the abrasive or back-up pad.
6) Always adopt a rm footing and/or position and be
aware of torque reaction developed by the sander.
7) Use only correct spare parts.
8) Always ensure that the material to be sanded is rmly
xed to prevent its movement.
9) Check hose and ttings regularly for wear. Do not carry
the tool by its hose; always be careful to prevent the
tool from being started when carrying the tool with the
air supply connected.
10) Dust can be highly combustible. Vacuum dust collection
bag should be cleaned or replaced daily. Cleaning or
replacing of bag also assures optimum performance.
11) Do not exceed maximum recommended air pressure.
Use safety equipment as recommended.
12) The tool is not electrically insulated. Do not use where
there is a possibility of coming into contact with live
electricity, gas pipes, water pipes, etc. Check the area
of operation before operation.
13) Take care to avoid entanglement with the moving parts
of the tool with clothing, ties, hair, cleaning rags, etc. If entangled, it will cause the body
to be pulled towards the work and moving parts of the machine and can be very danger-
ous.
14) Keep hands clear of the spinning pad during use.
15) If the tool appears to malfunction, remove from use immediately and arrange for service
and repair.
16) Do not allow the tool to free speed without taking precautions to protect any persons or
objects from the loss of the abrasive or pad.
Work Stations
Proper Use of Tool

2
Parts Page
NA
02/20/02
PWH
XPC0056
P/N
TITLE
X'POLE
XX/XX +/-NA
DRWN BY / DATE
MATERIAL
PROPRIETARY AND CONFIDENTIAL
PERMISSION OF X'POLE PRECISION TOOLS INC. IS PROHIBITED.
.XX +/-
DUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN
CKD BY / DATE
PRECISION
NA
PROPERTY OF X'POLE PRECISION TOOLS INC.ANY REPRO-
ANGLES +/-
NA
NA
NA
ENG APP / DATE
12/12/01
STD TOL
TOOLS INC.
.X +/-
DRM
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE
.XXX +/-
PARTS PAGE FOR MIRKA 5 in. AND 6 in.
ROS
40
INLET
TO
DWG SCALE 1 : 31.
INLET
TO
2. ITEMS 46 AND 49 ARE TO BE RETAINED ON THE
61
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
18
19
20
21
22
23
24
25 26
27
28
29 30
31
32
33
34
35
36
38
37
39
BODY OF ITEM47 AND 50 USING ITEM48.
42
41
45
43
FOR CENTRAL VAC
TO VACUUM SYSTEM
46
47
50
48 49
51
52
53
54
55
56
57
58
59
60
44
NOTES:
62
RAG 11/08/10 PWH 11/09/10
-ITEMS 61 AND 62 WERE NOT ON
R
MJW 03/31/09 RAG 03/31/09
"XPA429" AND "XPA430"
"XPA1699" WERE "XPA427" "XPA428"
-ITEM 23: LEVERS "XPA1698" AND
-ITEM 17: "N/A" WAS "XPA917" SHIM
"XPB0075"
"XPB0072" "XPB0073" "XPB0074" AND
"XPB0280" WERE STD BALANCERS
"XPB0277" "XPB00278" "XPB0079" AND
-ITEM 13: BiasBALANCED BALANCERS
1 in./28 mm HOSE SEALXPA077846
1SGV RETAINERXPA000645
214.0 x 1.5 O-RINGXPA004444
11/4-18 NPT INLET BUSHING ASSEMBLY
INSERT FOR MIRKA VACUUM BAGXPA046459
1HEX SOCKET BUTTON HEAD MACHINE SCREW M5 x 10XPA076958
1M5 WASHERXPA004757
OPTROS SuperVAC CV 3/4 in. SWIVEL EXHAUST ASSEMBLYXPA020556
1M5 x 0.8 FLANGED NUTXPA004855
1ROS SuperVAC™ CV 1 in./28 mm SWIVEL EXHAUST ASSEMBLYXPA009954
1Ø 1 in. VAC HOSE TO DOUBLE BAG FITTING AND AIRLINE ASSYXPA041253
OPTØ 3/4 in. VAC HOSE TO DOUBLE BAG FITTING AND AIRLINE ASSYXPA041153
1Ø 1 in. VAC HOSE TO Ø 1 in./28 mm x 1 1/2 in. ADAPTOR COUPLING AND AIRLINE ASSEMXPA039252
OPTØ 3/4 in. VAC HOSE TO Ø 3/4 in. x 1 in./28 mm ADAPTER COUPLING AND AIRLINE ASSMXPA030052
1SuperVAC SGV SKIRT/SHROUD ADAPTERXPC010851
OPTASSEMBLY FOR 3/4 in./19 mm HOSE SuperVAC SWIVEL EXHAUST FITTINGXPA040950
OPT3/4 in./19 mm HOSE SEALXPA085449
1MIRKA 1 in./28 mm HOSE SEAL TAG W/INSTRUCTIONXPA093148
OPTMIRKA 3/4 in./19 mm HOSE SEAL TAG W/INSTRUCTIONXPA085648
1ASSEMBLY FOR 1 in./28 mm HOSE SuperVAC SGV SWIVEL EXHAUST FITTINGXPA041047
1
1SPINDLE BEARING DUST SHIELDXPA254262
1FRONT BEARING DUST SHIELDXPA254161
1VACUUM BAGXPC011060
1
YTQNOITPIRCSEDN/PTI
1GNIRGNINIATERLANRETXE0400APX1
1SDLEIHS2-
GNIRAEB8X62X011200APX2
3 XPB0017REAR ENDPLATE 1
1YLBMESSAREDNILYC5000APX4
1GNIR-Omm0.2xmm52400APX5
6 XPB0005 MACHINED ROTOR 1
7 XPA0010VANE 5
1YEKFFURDOOWmm31xmm31400APX8
9 XPB0016FRONT ENDPLATE 1
1SDLEIHS2-GNIRAEB8X82X219100APX01
1GNIR-Omm1.3xmm4.935400APX11
12 XPA0001LOCK RING 1
13 XPB0279 5 x 3/32 in ORBIT AirS 1RECNALABTFAHS™sulPDLEIH
13 XPB02806 x3/32 in. ORBIT Ai 1RECNALABTFAHS™sulPDLEIHSr
13 XPB02775 x3/16 in ORBIT Ai 1RECNALABTFAHS™sulPDLEIHSr
13 XPB02786 x3/16 in. ORBIT Ai 1RECNALABTFAHS™su
lPDLEIHSr
14 XPA0122FILTER 1
1EVLAVKCEHCLLIBKCUD1210APX51
16 XPA0120VALVE RETAINER 1
17 N/A N/A -
18 XPA093812 x 28 x 16 DOUBLE ROW AN 1LAES1-GNIRAEBTCATNOCRALUG
1KHT2.0xDO0.81xDI1.21RECAPS6100APX91
1REHSAWELLIVELLEB7100APX02
21 XPA0018RETAINING RING 1
22 XPB0018SPINDLE 1
23 XPA1698THROTTLE LEVERFOR MIRKA 12,000 RPM 2.5 mm (3/32 in.) ORBIT SANDERS 1
23 XPA1699THROTTLE LEVERFOR MIRKA 12,000 RPM 5 mm (3/16 in.) ORBIT SANDERS 1
24 XPA0031LEVER SPRING PIN 1
TPOC321SMPWOLLEY.ni2/12,PIRG8820APX52
TPOC321SMPWOLLEYni4/32,PIRG9820APX52
1C321SMPWOLLEY.ni3,PIRG0920APX52
26 XPA0015VALVE SLEEVE 1
1GNISUOHDENIHCAM4420APX
72
1YLBMESSAMETSEVLAV8000APX82
1GNIR-Omm5.1xmm93400APX92
30 XPB0014SPEED CONTROL 1
1GNIRGNINIATERLANRETNI9300APX13
1DUORHSMUUCAV-NON.ni6/52100BPX23
1DUORHS™CAVrepuS.ni6/52100CPX33
34 XPC0073Ø 6 in. SCREEN ABRA 1DUORHS™CAVrepuSSOREVIS
1HCNERWDAPmm422200APX53
36 NA (ONE BACKUP PAD SUPPLIED WITH EACH TOOL - TYPE/SIZE MODEL DEPENDENT) 1
1RELFFUMLANRETNI2600APX73
38 XPA0068 MUFFLER INSERT 1
1GNISUOHRELFFUM6610APX93
40 XPA0009VALVE SEAT 1
41 XPA0007VALVE 1
42 XPA0014VALVE SPRING 1
43 XPA0013
REVISION RECORD
R DESCRIPTION / DATE
J
-ITEM 58 WAS THE INDIVIDUAL P/N FOR
THE VACUUM BAG (XPC0110) AND NOT THE
REORDER P/N's FOR 19 mm AND 28 mm
VACUUM BAG ASSEMBLIES
-ITEM 59 WAS TH EINDIVIDUAL P/N FOR
THE VACUUM BAG INSERT (XPA0464) AND
NOT THE 10 PACK P/N (XPA0465)
DRM 06/14/04 PWH 06/14/04
K
-XPA0769 SCREW (ITEM 57) WAS XPA0046
SCREW
-XPA0465 10 PACK OF VACUUM BAG
INSERTS (ITEM 59) WAS 8993206511 10
PACK OF VACUUM BAG INSERTS
RAG 12/14/04 PWH 12/31/04
L
-ITEM 7: DESC. WAS "....item 8 set)", QTY
WAS 1
-ITEM 8: P/N WAS XPA063, DESC. WAS
"...AND KEY SET."
-ITEM 9: DESC. WAS "...item 8 set)"
-ITEM 38 WAS STANDARD VACUUM PAD
-ITEM 39 P/N WAS XPA0096, DESC. WAS
"MUFFLER HOUSING ( includes...)
RAG 03/07/05 PWH 03/14/05
M
-ITEM 29: DESC. WAS "...includes item 29 o-
ring)"
-ITEM 30: DESC. WAS "...included with item
28)"
-ITEM 58 P/N XPC0110 WAS XPA0658
-ITEM 58 DESC. WAS "VACUUM BAG (one
included) WITH 19 mm ( 3/4 in.) AND 28 mm ( 1
in. ) VACUUM BAG FITTINGS
RAG 08/01/05 PWH 11/11/05
N
-DRAWING WAS NOT IN SOLIDWORKS
-DRAWING WAS NOT IN NEW "PARTS
PAGE" FORMAT, WITH REPLACMENT SETS
REMOVED AND LISTED SEPARATELY IN
MANUALS
-ITEMS AFTER 3 WERE NOT RENUMBERED
-ITEMS WERE NOT STANDARD
SOLIDWORKS TITLES.
-PART NUMBERS XPA0004, XPA0020,
XPA0035, XPA0098 XPA0193, XPA0465,
XPA0797, XPA0797, XPA0801 WERE NOT
REMOVED.
-PART NUMBERS XPA0016, XPA0778,
XPA0854, XPA0856, XPA0931, XPA0937,
XPA0938, XPB0005, XPC0109 WERE NOT
ADDED
-OLD ITEM 51 SPLIT INTO NEW ITEMS 52
AND 53 (CV AND SGV HOSE ASSYS WERE
NOT SEPARATED.)
-METRIC CONVERSIONS WERE NOT ON
TORQUE SPECS.
-NOTES WERE NOT ON
MJW 05/08/06 PWH 05/08/06
P
-PARTS "XPA0062" AND " XPA0068" (ITEMS
37 AND 38) POSITIONS AND ITEM NUMBERS
WERE NOT SWITCHED.
-TORQUE SETTING TABLE WAS NOT ON,
INDIVIDUAL TORQUE NOTES WERE NOT
REMOVED.
-QTY "OPT" OF ITEM 25 (XPA0288 AND
XPA0299), ITEM 48 (XPA0856), AND ITEM 49
WAS "1".
-REVISION "N" YEAR "06" WAS
INCORRECTLY "02" IN SIGN-OFFS..
MJW 05/22/06 PWH 05/27/06
Q
ITEMTORQUE SETTING
in.-lbs. (Nm)
12 55 - 65 (6.2 - 7.3)
39 16 - 20 (1.8 - 2.3)
43 60 - 72 (6.8 - 8.1)
45 36 - 48 (4.1 - 5.2)
58 30 - 35 (3.4 - 3.9)
Original Instructions

3
Parts List
Item P/N Description Qty.
1MPA0040 RETAINING RING 1
2 MPA0021 BEARING 1
3 MPB0017 REAR ENDPLATE 1
4MPA0005 CYLINDER ASSEMBLY 1
5MPA0042 O-RING 1
6 MPB0005 ROTOR 1
7 MPA0010 VANE 5
8MPA0041 KEY 1
9 MPB0016 FRONT ENDPLATE 1
10 MPA0019 BEARING 1
11 MPA0045 O-RING 1
12 MPA0001 LOCK RING 1
13 MPB0348 8 mm (5/16 in.) ORBIT AirSHIELD™ SHAFT BALANCER FOR 125 mm (5 in.) PADS 1
MPB0334 8 mm (5/16 in.) ORBIT AirSHIELD™ SHAFT BALANCER FOR 150 mm (6 in.) PADS 1
14 MPA0122 FILTER 1
15 MPA0121 CHECK VALVE 1
16 MPA0120 RETAINER 1
18 MPA0938 DOUBLE ROW BEARING 1
19 MPA0016 SPACER 1
20 MPA0017 WASHER 1
21 MPA0018 RETAINING RING 1
22 MPB0018 SPINDLE 1
23 MPA2123 LEVER FOR 12,000 RPM, 125 mm (5 in.) / 150 mm (6 in.) PADS 8 mm (5/16 in.) ORBIT MACHINES 1
24 MPA0031 PIN 1
25 MPA0288 65 mm (2 1/2 in.) GRIP (Optional) OPTIONAL
MPA0289 70 mm (2 3/4 in.) GRIP (Optional) OPTIONAL
MPA0290 75 mm (3 in.) GRIP (Standard)) 1
26 MPA0015 SLEEVE 1
27 MPA0244 HOUSING 1
28 MPA0008 VALVE STEM ASSEMBLY 1
29 MPA0043 O-RING 1
30 MPB0014 SPEED CONTROL 1
31 MPA0039 RETAINING RING 1
32 MPB0012 125/150 mm (5/6 in.) NON-VACUUM SHROUD 1
33 MPC0012 SuperVAC™ SHROUD for 125 mm (5 in.) Delta, TE, LP and Screen Abrasive pads 1
34 MPC0073 SuperVAC™ SHROUD for 150 mm (6 in.) Screen Abrasive and LP Pads 1
35 MPA0022 24 mm PAD WRENCH (supplied with each tool) 1
36 NA SEE LITERATURE FOR PADS (type/size determined by model) 1
37 MPA0062 INTERNAL MUFFLER (for 12,000 RPM Machines) 1
38 MPA0068 MUFFLER INSERT(for 12,000 RPM Machines) 1
39 MPA0166 MUFFLER HOUSING 1
40 MPA0009 SEAT 1
41 MPA0007 VALVE 1
42 MPA0014 VALVE SPRING 1
43 MPA0013 INLET BUSHING 1
44 MPA0044 O-RING 2
45 MPA0006 SGV RETAINER 1
46 MPA0778 28mm (1 in.) HOSE SEAL 1
47 MPA0410 28 mm (1 in.) HOSE SuperVAC™ SGV SWIVEL EXHAUST ASSEMBLY (Standard for SGV)) 1
48 MPA0856 19mm (3/4 in.) HOSE SEAL TAG OPTIONAL
MPA0931 28mm (1 in.) HOSE SEAL TAG 1
49 MPA0854 19mm (3/4 in.) HOSE SEAL OPTIONAL
50 MPA0409 19 mm (¾ in.) HOSE SuperVAC™ SGV SWIVEL EXHAUST ASSEMBLY (Optional for SGV) OPTIONAL
51 MPC0108 SuperVAC™ SGV EXHAUST ADAPTER (for use with SuperVAC™ Shroud) 1
52
MPA0300
Ø 19 mm (¾ in.) VAC HOSE TO Ø 19 mm (¾ in.) x Ø 28 mm (1 in.) HOSE ADAPTER COUPLING AND
AIRLINE ASSEMBLY INCLUDES: MPA0200 Ø 19 mm (¾ in.) x 1.5 m (5 ft.) Vacuum Hose, MPB0088 19
mm (¾ in.) Hose x 28 mm (1 in.) Hose Adapter, MPA0302 Ø 6.3 mm (¼ in.) x 1.5 m (5 ft.) Airline with Fit-
tings, MPA0301 Bungee for Ø 6.3 mm (¼ in.) Airline & Ø 19 mm (¾ in.) Vacuum Hose (5)
OPTIONAL
MPA0392
Ø 28 mm (1 in.) VAC HOSE TO Ø 28 mm (1 in.) x Ø 38 mm (1 ½ in.) FRICTION FIT ADAPTER AND AIR-
LINE ASSY. (Optional) INCLUDES: MPA0034 Ø 28 mm (1 in.) x 1.8 m (6 ft.) Vacuum Hose, MPB0092 Ø 28
mm (1 in.) Hose Thread x Ø 38 mm (1 ½ in.) Friction Fit Adapter, MPA0033 Ø 6.3 mm (¼ in.) x 1.8 m (6 ft.)
Airline with Fittings, MPA0027 Bungee for Ø 6.3 mm (¼ in.) Airline & Ø 28 mm (1 in.) Vacuum Hose (5)
OPTIONAL
53
MPA0412
Ø 28 mm (1 in.) VAC HOSE TO Ø 28 mm (1 in.) DOUBLE BAG FITTING AND AIRLINE ASSY. (Standard for
SGV) INCLUDES: MPA0034 Ø 28 mm (1 in.) x 1.8 m (6 ft.) Vacuum Hose, MPB0123 Ø 28 mm (1 in.) Hose
to Double Bag Vacuum Fitting, MPA0033 Ø 6.3 mm (¼ in.) x 1.8 m (6 ft.) Airline with Fittings, MPA0027
Bungee for Ø 6.3 mm (¼ in.) Airline & Ø 28 mm (1 in.) Vacuum Hose (5)
1
MPA0411
Ø 19 mm (¾ in.) VAC HOSE TO Ø 19 mm (¾ in.) DOUBLE BAG FITTING AND AIRLINE ASSEMBLY (Op-
tional for SGV) INCLUDES: MPA0200 Ø 19 mm (¾ in.) x 1.5 m (5 ft.) Vacuum Hose, MPB0133 Ø 19 mm
(¾ in.) Hose To Double Bag Vacuum Fitting, MPA0302 Ø 6.3 mm (¼ in.) x 1.5 m (5 ft.) Airline with Fittings,
MPA0301 Bungee for Ø 6.3 mm (¼ in.) Airline & Ø 19 mm (¾ in.) Vacuum Hose (5)
OPTIONAL
54 MPA0099 SuperVAC™ CV 28 mm (1 in.) SWIVEL EXHAUST ASSEMBLY (Standard for CV) 1
55 MPA0048 NUT 1
56 MPA0205 SuperVAC™ CV 19 mm (¾ in.) SWIVEL EXHAUST ASSEMBLY (Optional for CV) OPTIONAL
57 MPA0047 WASHER 1
58 MPA0769 SCREW 1
59 MPA0465 10 PACK OF VACUUM BAG INSERTS 1
60 MPA0658 VACUUM BAG 1
61 MPA2541 FRONT BEARING DUST SHIELD 1
62 MPA2542 SPINDLE BEARING DUST SHIELD 1

4
Orbit Vacuum
Type
Pad
Size mm
(inch)
Model
Number
Product
Net
Weight
kg
(pounds)
Height
mm
(inch)
Length
mm
(inch)
*Noise
Level
dBA
Power
watts
(HP)
Air Consump-
tion LPM
(scfm)
*Vibration
Level m/s2
*Uncer-
tainty
K
m/s2
8.0 mm
(5/16 in.)
Non-
Vacuum
125 (5) MR-508 0.76
(1.68) 82.9 (3.26) 150.37 (5.92) 74 209 (.28) 481 (17) 2.0 1.0
150 (6) MR-608 0.79
(1.74) 82.9 (3.26) 163.42 (6.45) 77 209 (.28) 481 (17) 3.3 1.7
Central
Vacuum
125 (5) MR-508V 0.82
(1.81) 82.9 (3.26) 212.08 (8.35) 77 209 (.28) 481 (17) 2.4 1.2
150 (6) MR-608V 0.87
(1.92) 82.9 (3.26) 224.8 (8.85) 75 209 (.28) 481 (17) 3.5 1.8
Self-Gen.
Vacuum
125 (5) MR-508SGV 0.84
(1.85) 82.9 (3.26) 220.66 (8.68) 91 209 (.28) 481 (17) 2.5 1.3
150 (6) MR-608SGV 0.90
(1.98) 82.9 (3.26) 233.4 (9.18) 82 209 (.28) 481 (17) 3.4 1.7
The noise test is carried out in accordance with EN ISO 15744:2008 - Hand-held non-electric power tools -- Noise measurement code
-- Engineering method (grade 2).
The vibration test is carried out in accordance with EN 28662-1 Hand-held portable power tools – Measurement of vibration at the
handle. Part 1: General and EN 8662-8, 1997 Hand-held portable power tools – Measurement of vibration at the handle. Part 8:
Polishers and rotary, orbital and random orbital sanders.
Specications subject to change without prior notice.
*The values stated in the table are from laboratory testing in conformity with stated codes and standards and are not sufcient for risk
evaluation. Values measured in a particular work place may be higher than the declared values. The actual exposure values and amount
of risk or harm experienced to an individual is unique to each situation and depends upon the surrounding environment, the way in which
the individual works, the particular material being worked, work station design as well as upon the exposure time and the physical condi-
tion of the user. KWH Mirka, Ltd. cannot be held responsible for the consequences of using declared values instead of actual exposure
values for any individual risk assessment.
Further occupational health and safety information can be obtained from the following websites:
http://europe.osha.eu.int (Europe)
http://www.osha.gov (USA)
Product Conguration/Specications: 12,000 RPM Random Orbital Sander

5
Symptom Possible Cause Solution
Low Power and/or Low Free
Speed
Insufcient Air Pressure Check air line pressure at the Inlet of the Sander
while the tool is running at free speed. It must be
6.2 Bar (90 psig/620 kPa).
Clogged Mufer(s) The Mufer can be back ushed with a clean, suit-
able cleaning solution until all contaminates and
obstructions have been removed. If the Mufer can
not be properly cleaned then replace it.
Plugged Inlet Screen Clean the Inlet Screen with a clean, suitable
cleaning solution. If Screen does not come clean
replace it.
One or more Worn or Broken Vanes Install a complete set of new Vanes (all vanes must
be replaced for proper operation). Coat all vanes
with quality pneumatic tool oil..
Internal air leakage in the Motor Housing
indicated by higher than normal air con-
sumption and lower than normal speed.
Check for proper Motor alignment and Lock Ring
engagement. Check for damaged O-Ring in Lock
Ring groove. Remove Motor Assembly and Re-
Install the Motor Assembly.
Motor Parts Worn Overhaul Motor. Contact authorized Mirka Service
Center.
Worn or broken Spindle Bearings Replace the worn or broken Bearings.
Air leakage through the Speed
Control and/or Valve Stem.
Dirty, broken or bent Valve Spring, Valve
or Valve Seat.
Disassemble, inspect and replace wore or dam-
aged parts.
Vibration/Rough Operation
Incorrect Pad Only use Pad Sizes and Weights designed for the
machine.
Addition of interface pad or other material Only use abrasive and/or interface designed for the
machine. Do not attach anything to the Sanders
Pad face that was not specically designed to be
used with the Pad and Sander.
Improper lubrication or buildup of foreign
debris.
Disassemble the Sander and clean in a suitable
cleaning solution. Assemble the Sander.
Worn or broken Rear or Front Motor
Bearing(s)
Replace the worn or broken Bearings.
For vacuum machines it is possible to
have too much vacuum while sanding on a
at surface causing the pad to stick to the
sanding surface.
For SGV machines add extra washer(s) to the pad
spindle to increase the gap between the pad and
shroud. For CV machines reduce vacuum through
the vacuum system and/or add extra washer(s)
to the pad.
Troubleshooting Guiide
Note: All Sections referred to under “Solution” are located at the end of the manual in “Service Instructions”
DOC A2122 REV 05/04/12

KWH Mirka Ltd
Finland
Tel. [phone]
www.mirka.com
[email protected]
Mirka (UK) Ltd
United Kingdom
Tel. [phone]
[email protected]
Mirka Schleifmittel GmbH
Germany
Tel. [phone]
[email protected]
Mirka Abrasives Inc.
USA
Tel. [phone]
www.mirka-usa.com
Mirka Scandinavia AB
Sweden, Norway, Denmark
Tel. [phone]
[email protected]
Mirka Abrasifs s.a.r.l.
France
Tel. [phone]
ventes[email protected]
Mirka Italia s.r.l.
Italy
Tel. [phone]
[email protected]
www.mirkaitalia.com
KWH Mirka Ibérica S.A.U.
Spain
Tel. [phone]
mirkaiber[email protected]
KWH Mirka Mexicana S.A. de C.V.
México
Tel. [phone]
[email protected]
www.mirka.com.mx
Mirka Brasil Ltda.
Brasil
Tel. [phone]
[email protected]
Mirka Asia Pacific Pte Ltd
Singapore
Tel. [phone]
[email protected]
Mirka Trading Shanghai Co., Ltd
China
Tel. [phone]
[email protected]
Mirka Rus LLC
Russia
Tel. [phone]
[email protected]
Mirka Abrasives Canada Inc.
Canada
Tel. [phone]
[email protected]
Mirka India Pvt Ltd
India
Tel: [phone]
sale[email protected]
www.mirka.com
Orbital Sander Pärm.indd 2 2010-12-08 01.05
Quality from start to finish