MIRKA AROS-B 150NV User manual

32
MIRKA® AROS-B & AOS-B
Mirka is expanding its power tool range by introducing the rst small
brushless battery driven spot repair sanders. As with all Mirka machines,
the ergonomic design has been a priority to ensure that the light tool can
comfortably be used for long periods without fatigue. These strong
cordless sanders enable a long working time as the battery lasts up to 16
hours in industrial use. The lithium-ion battery charges in only 45 minutes.
When using a cordless sander the operator can freely move around the
object. As no pneumatic hose is needed the risk of the hose causing
defects on the surface being sanded is removed.
MIRKA® AROS-B MIRKA® AOS-B
Brushless spot repair sander with a random 5
mm orbit. The battery-driven Mirka® AROS-B
150NV is small, ergonomic and energy ecient.
There’s no cord to get tangled in and no air
supply that can get contaminated; this tool does
not even require oiling. The 10.8V Li-ion battery
lasts up to 16 hours in industrial use and charges
in 45 minutes.
Brushless spot repair sander with a 3 mm orbit.
The battery-driven Mirka® AOS-B 130NV is small,
ergonomic and energy ecient. There’s no cord
to get tangled in and no air supply that can get
contaminated; this tool does not even require
oiling. The 10.8V Li-ion battery lasts up to 16
hours in industrial use and charges
in 45 minutes.
©KWH Mirka Ltd 202278 AA072016FG
For more information please visit www.mirka.com and check our videos on the Mirka YouTube channel
KWH Mirka Ltd Finland
Mirka cordless sanders are perfect in use together with our finessing discs, both for wet and dry sanding.
Features and benefits.
Up to 16 hours of use in spot repair sanding operations
No need of hose that will distract the operator
Ergonomic handle
Low noise level
Low vibration level
Easy attachment of backing pad with help of a Quick lock -system
Quick charging of battery
Technical Specifications
Mirka® AROS-B 150NV Mirka® AOS-B 130NV
Code 8991150311 8991230311
Voltage 10.8 VDC 10.8 VDC
Speed 4,000–8,000 rpm 4,000– 8,000 rpm
Orbit 5.0 mm (3
⁄
16”) 3.0 mm (1
⁄
8”)
Size of backing pad Ø 32 mm (1 1
⁄
4”) Ø 32 mm (1 1
⁄
4”)
Degree of protection III III
Battery charger BCA 108
Input 100– 240 VAC, 50/60 Hz
Charging time < 40 min (2.0 Ah)
Storage temperature range –20 ˚C…80 ˚C
Charging temperature –0 ˚C…40 ˚C
Dimension 191 x 102 x 86 mm
Net weight 0.66 kg (1.46 lbs)
Degree of protection II /
Battery pack BPA 10820
Type Rechargeable Li-ion 3I(NCM)R19/65
Battery voltage 10.8 VDC
Capacity 2.0 Ah 21.6 Wh
EAN: 6416868900965EAN: 6416868900903
Polarstar® SR WPF Abralon® Abranet® Q.Silver®
mirka.no
Oppdag en ledningsfri innovasjon
Mirka® AROS-B
150NV 32mm 10.8V Orbit 5.0
Mirkakode 8991150311
Siste nytt fra Mirka er de batteridrevne maskinene AROS-B. Denne sterke
ledningsfrie maskinen har et ergonomisk design for å garantere at du skal
kunne bruke verktøyet under en lengre periode. Batteritiden rekker opp til
16 timer beroende på yt-materialet, og er fulladet på 45 minutter.
-Meget lavt lydnivå.
-Opp til 16 timers bruk i SpotRepair System.
-Rask lading av batteriet.
-Enkelt å bytte rondell med hjelp av Quicklock –systemet.
-Elektrisk verktøy er mer økonomisk å bruke sammenlignet med
pneumatiske maskiner, med kun 1% energiforbruk.
Hva får du når du kjøper en batteridrevet maskin fra Mirka.
-Maskin med batteri
-Ekstra batteri
-Lader
-2 stk. Quicklock underlagsplater
PSA Hard (montert på maskinen)
Grip So
-Manual
Produkter til AROS-B
Vårt omfattende utvalg omfatter unike og patenterte produkter som Abralon og
Abranet. Begge er raskt blitt respekterte begreper i slipemidler industri.
Disse innovative produkter har allerede forandret mange menneskers idé om
sliping. Deretter maksimere eektiviteten og minimere kostnader, er det lett å
forstå hvorfor Mirka som passer både for de mest krevende programmene.
Mirka er denitivt ”the perfect slip løsningen”!
Eksempel på bruksområder og materiale:
Finjustering - Polarstar SR eller WPF roser
E-coat og Primer sliping - Abranet, Q.Silver eller Polarstar
Corean sliping - Abranet, Abralon

33
Mirka® AROS-B 150NV & AOS-B 130NV • 32 mm (1 ¼") • 10.8 V 47
en
Proper use of tool
This sander is designed for sanding all types of materials such as paints, metals, wood, stone, plastics, etc., using
abrasives specially designed for this purpose. Do not use this sander for any other purpose than that specified without
consulting the manufacturer or the manufacturer’s authorized supplier. Do not use backing pads with an operating
speed of less than 8000 rpm free speed. Any maintenance or repair work requiring the motor housing to be opened
may only be carried out by an authorized service center.
Battery and charger
•The battery pack is not fully charged out of the carton. First read the safety instructions and then charge your battery
according to the instructions.
•For optimal charging capacity the battery should be charged at an ambient temperature between 18°C and 24°C.
To prevent damage to the battery pack, do not charge the battery pack where the air temperature is below 4°C or
above 40°C.
•To obtain the longest possible battery life, we suggest the following:
– Store and charge your battery in a cool area. Temperatures above or below normal room temperature will shorten
battery life.
– Never store the battery in a discharged condition. Recharge it immediately after it has been discharged.
•All batteries gradually lose their charge. The higher the temperature, the quicker they lose their charge.
If you store your tool for long periods of time without use, recharge the battery every month. This practice will prolong
battery life.
Charging procedure
•Connect the power cord to the charger, and then plug into an outlet before inserting battery pack. All three charging
lights will be on for two seconds and then turn off.
• Insert the battery pack into the charger.
•During the charging process, the charging lights will indicate the status as follows:
– Three charging lights will flash in sequence during the charging process.
– Fully charged, all three lights will remain on continuously.
•The charging process will last approximately 40 minutes for Mirka 10.8 V 2.0 Ah battery pack.
NOTE: This charger can only charge Mirka 10.8 V battery packs.
NOTE: Charging times may be longer depending on the surrounding temperature and battery conditions.
LED indication of 10.8 V charger
LED
3
2
1
Status
Pre-charge
(Trickle charge) Charging… Charging… Charging finished Over temperature Battery failure
Remain continuously on
Flashing
Polarstar® SR WPF Abralon® Abranet® Q.Silver®
mirka.no
Oppdag en ledningsfri innovasjon
Mirka® AROS-B
150NV 32mm 10.8V Orbit 5.0
Mirkakode 8991150311
Siste nytt fra Mirka er de batteridrevne maskinene AROS-B. Denne sterke
ledningsfrie maskinen har et ergonomisk design for å garantere at du skal
kunne bruke verktøyet under en lengre periode. Batteritiden rekker opp til
16 timer beroende på yt-materialet, og er fulladet på 45 minutter.
-Meget lavt lydnivå.
-Opp til 16 timers bruk i SpotRepair System.
-Rask lading av batteriet.
-Enkelt å bytte rondell med hjelp av Quicklock –systemet.
-Elektrisk verktøy er mer økonomisk å bruke sammenlignet med
pneumatiske maskiner, med kun 1% energiforbruk.
Hva får du når du kjøper en batteridrevet maskin fra Mirka.
-Maskin med batteri
-Ekstra batteri
-Lader
-2 stk. Quicklock underlagsplater
PSA Hard (montert på maskinen)
Grip So
-Manual
Produkter til AROS-B
Vårt omfattende utvalg omfatter unike og patenterte produkter som Abralon og
Abranet. Begge er raskt blitt respekterte begreper i slipemidler industri.
Disse innovative produkter har allerede forandret mange menneskers idé om
sliping. Deretter maksimere eektiviteten og minimere kostnader, er det lett å
forstå hvorfor Mirka som passer både for de mest krevende programmene.
Mirka er denitivt ”the perfect slip løsningen”!
Eksempel på bruksområder og materiale:
Finjustering - Polarstar SR eller WPF roser
E-coat og Primer sliping - Abranet, Q.Silver eller Polarstar
Corean sliping - Abranet, Abralon

34
4Mirka® AROS-B 150NV & AOS-B 130NV • 32 mm (1 ¼") • 10.8 V
Exploded view

35
Mirka® AROS-B 150NV & AOS-B 130NV • 32 mm (1 ¼") • 10.8 V 5
Mirka code Item Description Kit Quantity
8991120311 Counter weight kit for AOS-B A
3Counter weight 1
4Seth screw 1
8991120511 Spindle bearing kit for AOS-B B
5Retaining ring 1
6Ball bearing 1
7Ball bearing 1
8Balance shaft 1
9Assembly screw 1
8991121111 Quick lock plate assembly for AOS-B C
11 Quick lock plate 1
12 Assembly screws 4
8991121411 Spindle bearing kit for AROS-B D
14 Retaining ring 1
15 Ball bearing 1
17 Ball bearing 1
19 Washer 1
20 Retaining ring 1
8991122411 Speed controller kit E
24 Speed controller 1
25 Battery wire 1
26 Motor connector assembly 1
27 Trigger wires 1
28 Battery terminal 1
29 Assembly screws for switch 2
31 Switch 1
32 Holder 1
33 Assembly screws for switch holder 2
8991123411 Trigger button kit F
34 Assembly screws for trigger button cover 4
35 Trigger button cover 1
36 Trigger spring 1
37 Trigger button 1
8991123811 PCB cover kit G
38 PCB cover 1
39 Assembly screws 4
8991124011 Cover kit H
40 Cover 1
41 Assembly clamps 2
44 Assembly screws for cover 2
8991124211 Label kit for AROS-B and AOS-B I
42 Tool labels 20
Spareparts and accessories on page 6.
Parts list – kits

36
6Mirka® AROS-B 150NV & AOS-B 130NV • 32 mm (1 ¼") • 10.8 V

-







Picture 1
Mirka code Item Description Kit Quantity
8991110111 1Housing 1
8991110231 2 AOS-B motor orbit 3.0 mm 1
8991110251 2 AROS-B motor orbit 5.0 mm 1
8991111011 10 Rubber mount 1
8991111311 13 Soft ring 1
8991122111 21 Battery pack 1
8991112211 22 Power cord 2.0 m Europlug 1
8991112311 22 Power cord 2.0 m US
8991112411 22 Power cord 2.0 m UK
8991112611 22 Power cord 2.0 m CN
8991112301 23 Spindle quick lock insert 1
8991123011 30 Battery charger 1
8294595311 43 Backing pad Quick lock 32 mm PSA Hard 1
8294598311 43 Backing pad Quick lock 32 mm Grip Soft 1
Parts list – spareparts & accessories
6Mirka® AROS-B 150NV & AOS-B 130NV • 32 mm (1 ¼") • 10.8 V

-







Picture 1
Mirka code Item Description Kit Quantity
8991110111 1Housing 1
8991110231 2 AOS-B motor orbit 3.0 mm 1
8991110251 2 AROS-B motor orbit 5.0 mm 1
8991111011 10 Rubber mount 1
8991111311 13 Soft ring 1
8991122111 21 Battery pack 1
8991112211 22 Power cord 2.0 m Europlug 1
8991112311 22 Power cord 2.0 m US
8991112411 22 Power cord 2.0 m UK
8991112611 22 Power cord 2.0 m CN
8991112301 23 Spindle quick lock insert 1
8991123011 30 Battery charger 1
8294595311 43 Backing pad Quick lock 32 mm PSA Hard 1
8294598311 43 Backing pad Quick lock 32 mm Grip Soft 1
Parts list – spareparts & accessories
Mirka® AROS-B 150NV & AOS-B 130NV • 32 mm (1 ¼") • 10.8 V 49
en
Disposal information
DANGER: Disposal guidelines for old appliances. Render redundant power tools unusable by
removing the power cord. Only for EU countries. Do not dispose of electric tools along with household
waste. According to European Directives 2002/95/EC, 2012/19/EU + 2003/108/EC on waste electrical
and electronic equipment and its implementation under national law, electric tools that have reached
the end of their life must be collected separately and taken to an environmentally compatible
recycling facility.
Troubleshooting guide
Symptom Possible cause Solution
No light from sander right LED when
trigger is pressed.
Battery pack not properly attached to the
sander.
Battery totally empty.
Insert the battery properly.
Charge the battery.
The right sander LED is red and the
sander slows down to 4 000 rpm or stops
when sanding.
Temperature too high in the sander. Heavy
load for too long.
Reduce the load on the sander for some
time and the sander will speed up again.
The right sander LED is red and rpm is
slightly reduced.
Too heavy short-term load. Use lighter load or wait a moment and the
LED will automatically change to green.
The left LED is red and the sander is not
running.
The battery voltage is too low. Charge the battery.
Further service
Servicing must always be performed by trained personnel. To keep the tool warranty valid and ensure optimal tool
safety and function, servicing must be carried out by a Mirka authorized service center. To locate your local Mirka
authorized service center, contact Mirka Customer service or your Mirka dealer.