Mitsubishi Electric Lossnay User manual

 ɉɭɥɶɬɭɩɪɚɜɥɟɧɢɹɅɨɫɫɧɟɣ3=6/%(
 ɍɩɪɚɜɥɟɧɢɟ
Ʉɧɨɩɤɚɜɵɛɨɪɚɪɟɠɢɦɚɜɟɧɬɢɥɹɰɢɢ
ɂɫɩɨɥɶɡɭɟɬɫɹɞɥɹɜɵɛɨɪɚɪɟɠɢɦɚ
ɜɟɧɬɢɥɹɰɢɢɪɟɤɭɩɟɪɚɰɢɹɛɚɣɩɚɫɫɢɥɢ
ɚɜɬɨɦɚɬɢɱɟɫɤɢ
>ɩɭɥɶɬɚ@
ɇɚɞɩɢɫɶɢɧɞɢɰɢɪɭɟɬɫɹɟɫɥɢɩɨɞɤɥɸɱɟɧɨ
ɩɭɥɶɬɚɭɩɪɚɜɥɟɧɢɹ
Ɉɛɚɩɭɥɶɬɚɜɬɚɤɨɦɩɨɞɤɥɸɱɟɧɢɢ
ɪɚɜɧɨɩɪɚɜɧɵɢɫɢɫɬɟɦɚɪɚɛɨɬɚɟɬɩɨ
ɩɨɫɥɟɞɧɟɣɤɨɦɚɧɞɟ
>ɋɜɹɡɚɧɧɵɣ@
Ƚɨɪɢɬɤɨɝɞɚɥɨɫɫɧɟɣɭɩɪɚɜɥɹɟɬɫɹɨɬɜɧɟɲ
ɧɟɝɨɫɢɝɧɚɥɚɢɥɢɜɧɭɬɪɟɧɧɟɝɨɛɥɨɤɚ
ɋɤɨɪɨɫɬɶɜɟɧɬɢɥɹɬɨɪɚ
ɉɨɤɚɡɵɜɚɟɬɜɵɛɪɚɧɧɭɸɫɤɨɪɨɫɬɶ
>Ɏɢɥɶɬɪ@
Ɂɚɝɨɪɚɟɬɫɹɤɨɝɞɚɜɪɟɦɹɧɚɪɚɛɨɬɤɢ
ɫɢɫɬɟɦɵɬɪɟɛɭɟɬɫɟɪɜɢɫɧɨɝɨ
ɨɛɫɥɭɠɢɜɚɧɢɹɱɢɫɬɤɢɮɢɥɶɬɪɚ
ɂɧɞɢɤɚɰɢɹɪɚɛɨɬɵ
Ƚɨɪɢɬɩɪɢɧɨɪɦɚɥɶɧɨɣɪɚɛɨɬɟ
Ɇɢɝɚɟɬɩɪɢɧɟɢɫɩɪɚɜɧɨɫɬɢ
Ɋɟɠɢɦɪɚɛɨɬɵ
ɉɨɤɚɡɵɜɚɟɬɪɟɠɢɦɪɚɛɨɬɵ
Ɋɟɤɭɩɟɪɚɬɨɪ
+($7(;
Ȼɚɣɩɚɫɫ
%<3$66
Ⱥɜɬɨɦɚɬɢɱɟɫɤɢ
ɊɟɤɭɩɟɪȻɚɣɩɚɫɫ
ɉɢɬɚɧɢɟ
ɉɨɤɚɡɵɜɚɟɬɧɚɥɢɱɢɟɩɢɬɚɧɢɹɧɚɩɭɥɶɬɟ
>ɉɪɨɜɟɪɤɚ@
Ƚɨɪɢɬɫɨɜɦɟɫɬɧɨɫɧɟɢɫɩɪɚɜɧɨɫɬɶɸ
ʋɛɥɨɤɚɰɢɮɪɵɨɲɢɛɤɚɰɢɮɪɵ
ȼɪɟɦɹɡɚɞɟɪɠɤɢ
ɉɨɤɚɡɵɜɚɟɬɜɪɟɦɹɡɚɞɟɪɠɤɢ
ɍɫɬɚɧɨɜɤɚɡɚɞɟɪɠɤɢ6(77,1*
;;ɦɢɧɡɚɞɟɪɠɤɚ;;
ȼɨɜɪɟɦɹɪɟɠɢɦɚɡɚɞɟɪɠɤɢ
;;ɦɢɧɡɚɞɟɪɠɤɚ;;
>ȼɄɅȼɕɄɅ@
Ʉɧɨɩɤɚɡɚɩɭɫɤɚɨɫɬɚɧɨɜɤɢ
ɋɤɨɪɨɫɬɶɜɟɧɬɢɥɹɬɨɪɚ
Ⱦɥɹɭɫɬɚɧɨɜɤɢɫɤɨɪɨɫɬɢ³ɇɢɡɤɚɹ´/RZ
ɢɥɢ³ȼɵɫɨɤɚɹ´+LJK
>Ɏɢɥɶɬɪ@
ɋɛɪɨɫɢɧɞɢɤɚɰɢɢɡɚɝɪɹɡɧɟɧɧɨɝɨɮɢɥɶɬɪɚ
Ʉɧɨɩɤɚɜɤɥɸɱɟɧɢɹɪɟɠɢɦɚɡɚɞɟɪɠɤɢ
ɍɫɬɚɧɚɜɥɢɜɚɟɬɜɪɟɦɹɡɚɞɟɪɠɤɢ
RU
/RZ +LJK
ɉɪɢɦ
ɉɪɢɩɪɨɩɚɞɚɧɢɢɢɩɨɫɥɟɞɭɸɳɟɦɜɨɫɫɬɚɧɨɜɥɟɧɢɢɩɢɬɚɧɢɹɪɟɠɢɦɵɪɚɛɨɬɵɜɨɫɫɬɚɧɚɜɥɢɜɚɸɬɫɹɚɜɬɨɦɚɬɢɱɟɫɤɢ



 Ɋɟɠɢɦ
ɇɟɡɚɜɢɫɢɦɚɹɪɚɛɨɬɚɥɨɫɫɧɟɣ
ɋɜɹɡɚɧɧɚɹɪɚɛɨɬɚɫɜɧɭɬɪɟɧɧɢɦɛɥɨɤɨɦɢɥɢɨɬɜɧɟɲɧɟɝɨɫɢɝɧɚɥɚ
Ʌɨɫɫɧɟɣɦɨɠɟɬɜɤɥɸɱɚɬɶɫɹɢɜɵɤɥɸɱɚɬɶɫɹɜɧɟɲɧɢɦɫɢɝɧɚɥɨɦɧɚɩɪɢɦɟɪɨɬɤɨɧɞɢɰɢɨɧɟɪɚ
ȼɷɬɨɦɫɥɭɱɚɟɝɨɪɢɬ>,17(5/2&.('@ȼɵɛɨɪɪɟɠɢɦɚɪɚɛɨɬɵɢɫɤɨɪɨɫɬɢɜɟɧɬɢɥɹɬɨɪɚɩɪɨɢɡɜɨɞɢɬɫɹɚɧɚɥɨɝɢɱɧɨ
ɧɟɡɚɜɢɫɢɦɨɣɪɚɛɨɬɟɛɥɨɤɚɫɦɜɵɲɟ
ɍɫɬɚɜɤɢɞɥɹɫɜɹɡɚɧɧɨɣɪɚɛɨɬɵɅɨɫɫɧɟɣɨɬɜɧɟɲɧɟɝɨɫɢɝɧɚɥɚɍɫɬɚɜɤɢɞɥɹɫɜɹɡɚɧɧɨɣɪɚɛɨɬɵɅɨɫɫɧɟɣɨɬɜɧɟɲɧɟɝɨɫɢɝɧɚɥɚ
Ɉɩɟɪɚɰɢɹ
Ʉɧɨɩɤɚ
Ⱦɢɫɩɥɟɣ ɉɨɪɹɞɨɤ
ȼɤɥɸɱɟɧɢɟ
ɛɥɨɤɚ
ɍɫɬɚɧɨɜɤɚ
ɪɟɠɢɦɚ
ɜɟɧɬɢɥɹɰɢɢ
ȼɵɛɨɪ
ɫɤɨɪɨɫɬɢ
ɜɟɧɬɢɥɹɬɨɪɚ
ȼɵɤɥɸɱɟɧɢɟ
ɛɥɨɤɚ
ɇɚɠɦɢɬɟ212))ɡɚɝɨɪɢɬɶɫɹɥɚɦɩɚɢɧɞɢɤɚɰɢɢ
ɪɚɛɨɬɵ
&21752//(56ɡɚɝɨɪɚɟɬɫɹɤɨɝɞɚɛɥɨɤɭɩɪɚɜɥɹ
ɟɬɫɹɨɞɧɨɜɪɟɦɟɧɧɨɫɞɜɭɯɩɭɥɶɬɨɜ
ɇɚɠɦɢɬɟɤɧɨɩɤɭɜɵɛɨɪɚɪɟɠɢɦɚɪɟɠɢɦɵɪɚɛɨɬɵ
ɦɟɧɹɸɬɫɹɩɨɫɥɟɞɨɜɚɬɟɥɶɧɵɦɧɚɠɚɬɢɟɦ
ɪɟɤɭɩɟɪɚɬɨɪɛɚɣɩɚɫɫɚɜɬɨ
>+($7(;@>%<3$66@>$872@
ȿɫɥɢɜɵɛɪɚɧ>$872@ɞɢɫɩɥɟɣɦɟɧɹɟɬɢɧɞɢɤɚɰɢɸ
ɤɚɠɞɵɟɫɟɤ
ɢɥɢ
ɇɚɦɢɬɟɤɧɨɩɤɭɜɵɛɨɪɚɫɤɨɪɨɫɬɢɜɟɧɬɢɥɹɬɨɪɚɢ
ɭɫɬɚɧɨɜɢɬɟɜɵɫɨɤɭɸ+LJK
ɢɥɢɧɢɡɤɭɸ/RZɫɤɨɪɨɫɬɶ

ɇɚɠɦɢɬɟ212))
Ʌɚɦɩɚɢɧɞɢɤɚɰɢɢɪɚɛɨɬɵɩɨɝɚɫɧɟɬ
ɉɪɢɦɟɪɪɟɠɢɦɛɚɣɩɚɫɫ
ɉɪɢɦɟɪɧɢɡɤɚɹɫɤɨɪɨɫɬɶ
ɂɧɞɢɤɚɰɢɹɪɚɛɨɬɵ
ɂɧɞɢɤɚɰɢɹɪɚɛɨɬɵ
ȼɪɟɦɹɡɚɞɟɪɠɤɢ
Ɉɩɪɟɞɟɥɹɟɬɡɚɞɟɪɠɤɭ
ɜɤɥɸɱɟɧɢɹɅɨɫɫɧɟɣɩɨɫɥɟ
ɩɨɞɚɱɢɜɧɟɲɧɟɝɨɫɢɝɧɚɥɚ
ɭɩɪɚɜɥɟɧɢɹ
ɋɜɹɡɚɧɧɵɣɪɟɠɢɦ
ɍɫɬɚɧɚɜɥɢɜɚɟɬɫɹɱɬɨɛɵ
ɡɚɞɚɬɶɩɨɪɹɞɨɤɜɤɥɸɱɟɧɢɹ
Ʌɨɫɫɧɟɣɨɬɜɧɟɲɧɟɝɨ
ɫɢɝɧɚɥɚɧɚɩɪɢɦɟɪɨɬ
ɫɢɫɬɟɦɵɭɩɪɚɜɥɟɧɢɹ
ɤɨɧɞɢɵɢɨɧɟɪɚ
 Ɂɚɞɟɪɠɤɚɧɟɪɚɛɨɬɚɟɬ
ɜɫɥɭɱɚɟɤɨɝɞɚɜɵɛɪɚɧ
ɪɟɠɢɦɪɚɛɨɬɵ>@ɢɥɢ
ɤɨɝɞɚɅɨɫɫɧɟɣɫɜɹɡɚɧɫ
ɫɢɫɬɟɦɨɣɰɟɧɬɪɚɥɶɧɨɝɨ
ɭɩɪɚɜɥɟɧɢɹ
ɉɪɢɤɚɠɞɨɦɩɨɫɥɟɞɭɸɳɟɦɧɚɠɚɬɢɢɦɟɧɹɟɬɫɹɜɪɟɦɹɡɚɞɟɪɠɤɢ
ɦɢɧɭɬɵ
 ĺ  ĺ  ĺ  ĺ  ĺ  ĺ 
Ĺ
ȿɫɥɢɤɧɨɩɤɚɧɟɧɚɠɢɦɚɟɬɫɹɛɨɥɟɟɫɟɤɬɨɢɧɞɢɤɚɬɨɪɝɚɫɧɟɬɢ
ɭɫɬɚɧɚɜɥɢɜɚɟɬɫɹɬɟɤɭɳɚɹɭɫɬɚɜɤɚ
Ɂɚɜɨɞɫɤɚɹɭɫɬɚɜɤɚɦɢɧ
 ɇɚɠɦɢɬɟɢɭɞɟɪɠɢɜɚɣɬɟɤɧɨɩɤɭɧɟɦɟɧɟɟɫɟɤ
Ɂɚɜɨɞɫɤɚɹɭɫɬɚɜɤɚ>@
 ɇɚɠɢɦɚɣɬɟɤɧɨɩɤɭɩɨɫɥɟɞɨɜɚɬɟɥɶɧɨ
ĺĺĺĺ
ȿɫɥɢɤɧɨɩɤɚɧɟɧɚɠɢɦɚɟɬɫɹɛɨɥɟɟɫɟɤɬɨɢɧɞɢɤɚɬɨɪɝɚɫɧɟɬɢ
ɭɫɬɚɧɚɜɥɢɜɚɟɬɫɹɬɟɤɭɳɚɹɭɫɬɚɜɤɚ
ɍɫɬɚɜɤɚ Ʉɧɨɩɤɚ Ⱦɢɫɩɥɟɣ ɉɨɪɹɞɨɤ
ɉɪɢɦɟɪɢɧɞɢɤɚɰɢɹɦɢɧ
ɉɪɢɦɟɪɊɟɠɢɦ>@
6(77,1* 0,1'(/$<('
6(77,1*
6(77,1*
,175(/2&.('
,175(/2&.('
Ɂɚɞɟɪɠɤɚɜɤɥɸɱɟɧɢɹ
'(/$<67$57
Ʉɧɨɩɤɚɜɵɛɨɪɚɪɟɠɢɦɚ


Ɋɟɠɢɦɵ
ɋɜɹɡɚɧɧɵɣɪɟɠɢɦ
ʋɞɢɫɩɥ




ɋɜɹɡɚɧɧɵɣɪɟɠɢɦ
ɪɚɛɨɬɵ
ȼɤɥɸɱɟɧɢɟ
ȼɵɤɥɸɱɟɧɢɟ
ȼɤɥɜɵɤɥɫ
ɩɪɢɨɪɢɬɟɬɨɦ
ɜɧɟɲɧɟɝɨɫɢɝɧɚɥɚ
Ɋɚɛɨɬɚɨɬɜɧɟɲɧɟɝɨɛɥɨɤɚɭɩɪɚɜɥɟɧɢɹ
Ʉɨɝɞɚɜɧɟɲɧɟɟɭɫɬɪɨɣɫɬɜɨɜɤɥɸɱɚɟɬɫɹ
Ʌɨɫɫɧɟɣɬɨɠɟɜɤɥɸɱɚɟɬɫɹ
ȼɧɟɲɧɟɟɭɫɬɪɨɣɫɬɜɨɨɫɬɚɧɚɜɥɢɜɚɟɬɫɹɢ
Ʌɨɫɫɧɟɣɨɫɬɚɧɚɜɥɢɜɚɟɬɫɹ
Ɍɨɠɟɱɬɨɢ³´ɬɨɥɶɤɨɧɟɜɨɡɦɨɠɧɨɨɫɬɚɧɨ
ɜɢɬɶɅɨɫɫɧɟɣɫɩɭɥɶɬɚɟɫɥɢɜɧɟɲɧɟɟ
ɭɫɬɪɨɣɫɬɜɨɩɪɨɞɨɥɠɚɟɬɪɚɛɨɬɚɬɶ
Ɋɚɛɨɬɚɨɬɫɢɫɬɟɦɵ
ɰɟɧɬɪɚɥɶɧɨɝɨɭɩɪɚɜɥɟɧɢɹ
Ʌɨɫɫɧɟɣɜɤɥɸɱɚɟɬɫɹɢɜɵɤɥɸɱɚɟɬɫɹɨɬ
ɫɢɝɧɚɥɚɫɢɫɬɟɦɵɰɟɧɬɪɚɥɶɧɨɝɨ
ɭɩɪɚɜɥɟɧɢɹ
Ɍɨɠɟɱɬɨɢ³´
 Ɉɛɫɥɭɠɢɜɚɧɢɟ
ɋɛɪɨɫɫɢɝɧɚɥɚ
³Ɏɢɥɶɬɪ´
Ɉɱɢɫɬɤɚɮɢɥɶɬɪɚ
Ɉɛɫɥɭɠɢɜɚɧɢɟ
ɩɭɥɶɬɚ
ɭɩɪɚɜɥɟɧɢɹ
Ʉɧɨɩɤɚ
ɉɪɨɢɡɜɨɞɢɬɟɱɢɫɬɤɭɮɢɥɶɬɪɚɅɨɫɫɧɟɣɫɨɝɥɚɫɧɨɢɧɫɬɪɭɤɰɢɢɩɪɢɥɚɝɚɟɦɨɣɤɛɥɨɤɭ
ɉɪɨɬɢɪɚɣɬɟɩɭɥɶɬɭɩɪɚɜɥɟɧɢɹɨɬɩɵɥɢɢɝɪɹɡɢ
ɧɟɥɶɡɹɢɫɩɨɥɶɡɨɜɚɬɶɞɥɹɱɢɫɬɤɢɩɭɥɶɬɚɪɚɫɬɜɨɪɢɬɟɥɢɛɟɧɡɢɧɢɩɪ
Ⱦɢɫɩɥɟɣ Ⱦɟɣɫɬɜɢɹ
ɇɚɠɦɢɬɟɤɧɨɩɤɭ>)LOWHU@ɞɜɚ
ɪɚɡɚɩɨɞɪɹɞ
ɂɧɞɢɤɚɰɢɹɩɨɝɚɫɧɟɬ
 ɋɟɪɜɢɫɧɨɟɨɛɫɥɭɠɢɜɚɧɢɟ
ȿɫɥɢɧɚɞɢɫɩɥɟɟɩɨɹɜɢɬɶɫɹɨɞɧɨɢɡɧɢɠɟɩɟɪɟɱɢɫɥɟɧɧɵɯɱɢɫɟɥɩɪɢɝɥɚɫɢɬɟɫɟɪɜɢɫɧɭɸɫɥɭɠɛɭ
),/7(5
ɇɚɠɚɬɶɞɜɚɠɞɵ
),/7(5
Ⱦɟɣɫɬɜɢɹɩɪɢɦɢɝɚɧɢɢɢɧɞɢɤɚɰɢɢɡɚɝɪɹɡɧɟɧɢɹɮɢɥɶɬɪɚ
ȼɤɥɜɵɤɥɫ
ɜɨɡɦɨɠɧɨɫɬɶɸ
ɪɚɛɨɬɵɨɬɩɭɥɶɬɚ
Ʌɨɫɫɧɟɣ
Ʉɨɝɞɚɜɧɟɲɧɟɟɭɫɬɪɨɣɫɬɜɨɜɤɥɸɱɚɟɬɫɹ
Ʌɨɫɫɧɟɣɬɨɠɟɜɤɥɸɱɚɟɬɫɹ
ȼɧɟɲɧɟɟɭɫɬɪɨɣɫɬɜɨɨɫɬɚɧɚɜɥɢɜɚɟɬɫɹ
Ʌɨɫɫɧɟɣɪɚɛɨɬɚɟɬɫɨɝɥɚɫɧɨɫɨɫɬɨɹɧɢɸ
ɫɜɨɟɝɨɩɭɥɶɬɚɭɩɪɚɜɥɟɧɢɹ
Ʉɨɝɞɚɜɧɟɲɧɟɟɭɫɬɪɨɣɫɬɜɨɜɤɥɸɱɚɟɬɫɹ
Ʌɨɫɫɧɟɣɪɚɛɨɬɚɟɬɫɨɝɥɚɫɧɨɫɨɫɬɨɹɧɢɸ
ɫɜɨɟɝɨɩɭɥɶɬɚɭɩɪɚɜɥɟɧɢɹ
ȼɧɟɲɧɟɟɭɫɬɪɨɣɫɬɜɨɨɫɬɚɧɚɜɥɢɜɚɟɬɫɹ
Ʌɨɫɫɧɟɣɬɨɠɟɨɫɬɚɧɚɜɥɢɜɚɟɬɫɹ
Ʌɨɫɫɧɟɣɜɤɥɸɱɚɟɬɫɹɩɨɫɢɝɧɚɥɭɨɬ
ɫɢɫɬɟɦɵɭɩɪɚɜɥɟɧɢɹɩɪɢ
ɩɨɞɚɱɟɫɢɝɧɚɥɚɜɵɤɥɸɱɟɧɢɹ
Ʌɨɫɫɧɟɣɪɚɛɨɬɚɟɬɫɨɝɥɚɫɧɨɫɨɫɬɨɹɧɢɸ
ɫɜɨɟɝɨɩɭɥɶɬɚɭɩɪɚɜɥɟɧɢɹ
Ʌɨɫɫɧɟɣɜɵɤɥɸɱɚɟɬɫɹɩɨɫɢɝɧɚɥɭɨɬ
ɫɢɫɬɟɦɵɭɩɪɚɜɥɟɧɢɹɩɪɢ
ɩɨɞɚɱɟɫɢɝɧɚɥɚɜɤɥɸɱɟɧɢɹ
Ʌɨɫɫɧɟɣɪɚɛɨɬɚɟɬɫɨɝɥɚɫɧɨɫɨɫɬɨɹɧɢɸ
ɫɜɨɟɝɨɩɭɥɶɬɚɭɩɪɚɜɥɟɧɢɹ


ɋɤɨɪɨɫɬɶɜɟɧɬɢɥɹɬɨɪɚ
 ȼɧɟɲɧɢɟɪɚɡɦɟɪɵɢɫɨɫɬɚɜɧɵɟɱɚɫɬɢ
 ɍɫɬɚɧɨɜɨɱɧɵɟɪɚɡɦɟɪɵ
Ɍɢɩɢɱɧɚɹɭɫɬɚɧɨɜɤɚ
,QGHSHQGHQWRSHUDWLRQRIWKH/RVVQD\XQLW!
 ɉɪɢɪɚɛɨɬɟɨɬɞɜɭɯɩɭɥɶɬɨɜ
ɪɚɛɨɬɚɩɪɨɢɫɯɨɞɢɬɩɨɩɨɫɥɟɞɧɟɦɭɫɢɝɧɚɥɭ
ɋɜɹɡɚɧɧɚɹɪɚɛɨɬɚɫɤɨɧɞɢɰɢɨɧɟɪɨɦɢɩɪ!
/RVVQD\
/RVVQD\ ɉɭɥɶɬɵ
ɉɢɬɚɧɢɟ
/RVVQD\ ɆɚɤɫɛɥɨɤɨɜɅɨɫɫɧɟɣ
ɦɨɝɭɬɛɵɬɶɩɨɞɤɥɸɱɟɧɵ
3RZHUVXSSO\
5HPRWHFRQWUROOHUV
3RZHUVXSSO\ ,QGRRU
XQLW
ɉɢɬɚɧɢɟ
Ɇɨɧɬɚɠɧɨɟɨɬɜ[
Ⱦɢɫɩɥɟɣ
ȼɵɛɨɪɪɟɠɢɦɚ
ɄɧɨɩɤɚȼɄɅȼɕɄɅ
Ʉɪɵɲɤɚ
ɋɛɪɨɫɢɧɞɢɤɚɰɢɢ³Ɏɢɥɶɬɪ´
Ʉɥɟɦɦɵ
ɂɧɞɢɤɚɬɨɪɪɚɛɨɬɵ
Ɂɚɞɟɪɠɤɚɜɤɥ
Ⱥɤɫɟɫɫɭɚɪɵ
ɒɭɪɭɩɵ[ ȿɞɢɡɦɦɦ
 Ʉɚɛɟɥɶ
ɍɫɬɚɧɨɜɢɬɟɩɭɥɶɬɧɚɫɬɟɧɟɛɟɡɩɟɪɟɞɧɟɣɩɚɧɟɥɢ
 ɉɪɨɛɪɨɫɶɬɟɤɚɛɟɥɶɞɨɩɭɥɶɬɚ
 ɉɨɞɤɥɸɱɢɬɟɫɢɝɧɚɥɶɧɭɸɥɢɧɢɸɤɅɨɫɫɧɟɣɢɩɭɥɶɬɭ
ɯɠɢɥɶɧɵɣɤɚɛɟɥɶɬɢɩɉȼɋɨɬɞɨɦɦð
ɉɪɢɦ
ɉɟɪɟɞɩɨɞɤɥɸɱɟɧɢɟɦɫɢɝɧɚɥɶɧɨɝɨɤɚɛɟɥɹɭɛɟɞɢɬɟɫɶɱɬɨ
ɧɚɅɨɫɫɧɟɣɧɟɩɨɞɚɧɨɩɢɬɚɧɢɟ
 





 





 ɋɧɹɬɢɟɩɟɪɟɞɧɟɣɩɚɧɟɥɢ
ɋɧɹɬɢɟɫɩɨɦɨɳɶɸɩɥɨɫɤɨɣɨɬɜɟɪɬɤɢ
ɉɪɢɦ
ɋɨɛɥɸɞɚɣɬɟɨɫɬɨɪɨɠɧɨɫɬɶɜɨɢɡɛɟɠɚɧɢɟɩɨɥɨɦɤɢ
Ʉɚɛɟɥɶɤɧɚɥɨɬɞɨɦɦɞɢɚɦɟɬɪ
Ƚɚɣɤɚ
Ʉɚɛɟɥɶ
ɫɢɝɧɚɥɶɧɵɣ
Ɂɚɝɥɭɲɤɚ
ȿɞɢɡɦɦɦ
ɉɭɥɶɬ
ɉɚɧɟɥɶɩɟɪɟɞɧɹɹ

 ɉɟɪɟɤɥɸɱɟɧɢɟɪɟɠɢɦɚ
 ɍɫɬɚɧɨɜɤɚɜɪɟɦɟɧɢɧɚɪɚɛɨɬɤɢɮɢɥɶɬɪɚ
ɉɪɢɧɚɪɚɛɨɬɤɟɅɨɫɫɧɟɣɨɩɪɟɞɟɥɟɧɧɨɝɨɤɨɥɢɱɟɫɬɜɚɱɚɫɨɜ
ɧɚɱɢɧɚɟɬɦɢɝɚɬɶɢɧɞɢɤɚɰɢɹɡɚɝɪɹɡɧɟɧɢɹɮɢɥɶɬɪɚɍɫɬɚɧɨɜɤɚ
ɜɪɟɦɟɧɢɧɚɪɚɛɨɬɤɢɡɚɜɢɫɢɨɬɤɨɧɤɪɟɬɧɵɯɭɫɥɨɜɢɣɷɤɫɩɥɭɚɬɚɰɢɢ
Ⱦɥɹɭɫɬɚɧɨɜɤɢɜɪɟɦɟɧɢɧɚɪɚɛɨɬɤɢɧɚɠɦɢɬɟɤɧɨɩɤɭ),/7(5ɢ
ɭɞɟɪɠɢɜɚɣɬɟɟɟɧɟɦɟɧɟɟɫɟɤɍɫɬɚɧɨɜɥɟɧɧɨɟɡɧɚɱɟɧɢɟ
ɩɨɹɜɢɬɶɫɹɧɚɞɢɫɩɥɟɟ
Ɂɚɬɟɦɩɨɫɥɟɞɨɜɚɬɟɥɶɧɨɟɧɚɠɚɬɢɟɤɧɨɩɤɢ
ɢɡɦɟɧɹɟɬɡɧɚɱɟɧɢɟ
Ɂɚɜɨɞɫɤɚɹɭɫɬɚɜɤɚ
 ĺ  ĺ 2)) ĺ 
Ĺ
ȿɫɥɢɤɧɨɩɤɭɧɟɧɚɠɢɦɚɸɬɛɨɥɟɟɫɟɤɭɫɬɚɧɚɜɥɢɜɚɟɬɫɹɬɟɤɭɳɟɟ
ɡɧɚɱɟɧɢɟɢɩɭɥɶɬɜɵɯɨɞɢɬɢɡɪɟɠɢɦɚ
 ɍɫɬɚɧɨɜɤɚɡɚɞɟɪɠɤɢɜɤɥɸɱɟɧɢɹ
ȼɪɟɦɹɡɚɞɟɪɠɤɢɷɬɨɜɪɟɦɹɧɚɤɨɬɨɪɨɟɅɨɫɫɧɟɣɜɤɥɸɱɚɟɬɫɹɩɨɡɠɟ
ɜɧɟɲɧɟɝɨɭɩɪɚɥɹɸɳɟɝɨɭɫɬɪɨɣɫɬɜɚ
Ⱦɥɹɭɫɬɚɧɨɜɤɢɜɪɟɦɟɧɢ
ɡɚɞɟɪɠɤɢɧɚɠɦɢɬɟɤɧɨɩɤɭ
'(/$< 67$57 ɢɭɞɟɪɠɢɜɚɣɬɟɟɟ
ɧɟɦɟɧɟɟɫɟɤɍɫɬɚɧɨɜɥɟɧɧɨɟɡɧɚɱɟɧɢɟɩɨɹɜɢɬɶɫɹɧɚɞɢɫɩɥɟɟ
ɢɡɦɟɧɹɟɬɡɧɚɱɟɧɢɟ
ɉɨɫɥɟɞɨɜɚɬɟɥɶɧɨɟɧɚɠɚɬɢɟɤɧɨɩɤɢ
ɢɡɦɟɧɹɟɬɡɧɚɱɟɧɢɟ
ɡɚɜɨɞɫɤɚɹɭɫɬɚɜɤɚ
 ĺ  ĺ  ĺ  ĺ  ĺ  ĺ PLQXWHV
Ĺ
ɡɚɜɨɞɫɤɚɹɭɫɬɚɜɤɚ
ȿɫɥɢɤɧɨɩɤɭɧɟɧɚɠɢɦɚɸɬɛɨɥɟɟɫɟɤɭɫɬɚɧɚɜɥɢɜɚɟɬɫɹɬɟɤɭɳɟɟ
ɡɧɚɱɟɧɢɟɢɩɭɥɶɬɜɵɯɨɞɢɬɢɡɪɟɠɢɦɚ
ɈɛɪɚɬɢɬɟɜɧɢɦɚɧɢɟɱɬɨɟɫɥɢɫɜɹɡɚɧɧɵɣɪɟɠɢɦɅɨɫɫɧɟɣ
ɨɬɤɥɸɱɟɧɞɚɧɧɚɹɮɭɧɤɰɢɹɧɟɪɚɛɨɬɚɟɬ
 ɍɫɬɚɧɨɜɤɚɫɜɹɡɚɧɧɨɝɨɪɟɠɢɦɚ
ɋɜɹɡɚɧɧɵɣɪɟɠɢɦɢɫɩɨɥɶɡɭɟɬɫɹɞɥɹɭɩɪɚɜɥɟɧɢɹɅɨɫɫɧɟɣɨɬ
ɜɧɟɲɧɟɝɨɭɫɬɪɨɣɫɬɜɚȾɥɹɭɫɬɚɧɨɜɤɢɫɜɹɡɚɧɧɨɝɨɪɟɠɢɦɚ
ɧɚɠɦɢɬɟɢɭɞɟɪɠɢɜɚɣɬɟɤɧɨɩɤɭɞɥɹɜɯɨɞɚɜɪɟɠɢɦ
Ɂɚɬɟɦɩɨɫɥɟɞɨɜɚɬɟɥɶɧɨɟɧɚɠɚɬɢɟɤɧɨɩɤɢ
ɦɟɧɹɟɬɪɟɠɢɦɫɜɹɡɚɧɧɨɣɪɚɛɨɬɵɤɚɤɩɨɤɚɡɚɧɨɧɢɠɟ

ĺ  ĺ  ĺ 
Ĺ
ɡɚɜɨɞɫɤɚɹɭɫɬɚɜɤɚ
ȿɫɥɢɤɧɨɩɤɚɧɟɧɚɠɢɦɚɟɬɫɹɛɨɥɟɟɫɟɤɩɭɥɶɬ
ɡɚɩɨɦɢɧɚɟɬɬɟɱɭɳɟɟɡɧɚɱɟɧɢɟɭɫɬɚɜɤɢɢɜɵɯɨɞɢɬ
ɢɡɪɟɠɢɦɚ
ɉɨɞɪɨɛɧɨɟɨɩɢɫɚɧɢɟɪɚɛɨɬɵɅɨɫɫɧɟɣɜɫɜɹɡɚɧɧɨɦ
ɪɟɠɢɦɟɫɦɫɬɪʋ
'(/$<67$57
),/7(5

 ɉɨɞɤɥɸɱɟɧɢɟɤɚɛɟɥɹɢɭɫɬɚɧɨɜɤɚɩɭɥɶɬɚ
 ȼɫɬɚɜɶɬɟɤɚɛɟɥɶɜɤɥɟɦɦɵɤɨɥɨɞɤɢɧɟɩɨɥɹɪɧɨɟɫɨɟɞɢɧɟɧɢɟ
 ɍɛɟɞɢɬɟɫɶɱɬɨɩɪɨɜɨɞɚɡɚɤɪɟɩɥɟɧɵ
 ɍɫɬɚɧɨɜɢɬɟɩɭɥɶɬɜɛɨɤɫɢɫɩɨɥɶɡɭɹɲɭɪɭɩɵ
ɇɚɠɚɬɶɧɚɷɬɭɤɧɨɩɤɭ
ɞɥɹɨɬɤɪɵɬɢɹ
Ʉɥɟɦɦɵ
ȼɫɬɚɜɢɬɶ
ɩɪɨɜɨɞ
ɉɭɥɶɬȾɍ
ɒɭɪɭɩɵ
Ȼɨɤɫ
 ɍɫɬɚɧɨɜɤɚɩɟɪɟɞɧɟɣɩɚɧɟɥɢ
Ⱦɥɹɭɫɬɚɧɨɜɤɢɜɫɬɚɜɶɬɟɜɟɪɯɧɸɸɱɚɫɬɶɢɧɚɞɚɜɢɬɟɧɚɧɢɠɧɸɸ
ɉɭɥɶɬȾɍ
ɉɚɧɟɥɶ
Ʉɪɸɱɤɢ
6(77,1*  ),/7(5
6(77,1* 
,17(5/2&.('
6(77,1* 0,1'(/$<('


Ʉɨɞɨɲɢɛɤɢ






Ɉɩɢɫɚɧɢɟ
Ɋɟɠɢɦɢɧɢɰɢɚɥɢɡɚɰɢɢɦɢɝɚɟɬ>+2@ɩɪɢɦɟɪɧɨɫɟɤ
ɇɚɠɦɢɬɟɤɧɨɩɤɭ212))Ɂɚɝɨɪɢɬɶɫɹɥɚɦɩɚɢɧɞɢɤɚɰɢɢɪɚɛɨɬɵɢ
Ʌɨɫɫɧɟɣɜɤɥɸɱɢɬɶɫɹ
Ⱦɚɧɧɨɣɤɧɨɩɤɨɣɜɵɛɟɪɢɬɟɪɟɠɢɦɪɚɛɨɬɵɩɪɢɷɬɨɦɧɚɞɢɫɩɥɟɟ
ɛɭɞɟɬɦɟɧɹɬɶɫɹɢɧɞɢɤɚɰɢɹ
>+($7(;@ĺ>%<3$66@ĺ>$872@
Ʉɧɨɩɤɨɣɢɡɦɟɧɟɧɢɹɫɤɨɪɨɫɬɢɜɟɧɬɢɥɹɬɨɪɚɭɫɬɚɧɨɜɢɬɟɜɵɫɨɤɭɸɢ
ɧɢɡɤɭɸɫɤɨɪɨɫɬɶ
ȼɵɤɥɸɱɢɬɟɅɨɫɫɧɟɣ
Ɍɟɫɬɨɜɵɣɡɚɩɭɫɤ
ɉɨɫɥɟɡɚɜɟɪɲɟɧɢɹɦɨɧɬɚɠɧɵɯɪɚɛɨɬɧɟɨɛɯɨɞɢɦɨɩɪɨɜɟɫɬɢɬɟɫɬɨɜɵɣɡɚɩɭɫɤ
ɉɪɢɩɨɞɚɱɟɩɢɬɚɧɢɹɧɚɩɭɥɶɬɟɧɚɱɢɧɚɟɬɦɢɝɚɬɶ>+2@ɩɪɢɦɟɪɧɨɫɟɤɞɚɥɟɟɫɢɫɬɟɦɚɩɟɪɟɯɨɞɢɬɜɪɚɛɨɱɢɣɪɟɠɢɦ
Ʉɧɨɩɤɚ





Ⱦɢɫɩɥɟɣ
ɉɪɢɢɡɦɟɧɟɧɢɢɪɟɠɢɦɚɜɟɧɬɢɥɹɰɢɢɩɪɨɢɫɯɨɞɢɬɡɚɞɟɪɠɤɚɢɡɦɟɧɟɧɢɹɩɨɥɨɠɟɧɢɹɡɚɫɥɨɧɤɢɞɥɢɬɟɥɶɧɨɫɬɶɸɞɨɫɟɤ
Ɍɚɛɥɢɰɚɧɟɢɫɩɪɚɜɧɨɫɬɟɣɤɨɞɨɲɢɛɤɢɦɢɝɚɟɬɧɚɩɭɥɶɬɟɭɩɪɚɜɥɟɧɢɹ
ɉɪɢɱɢɧɚ
6:ɜɤɥɸɱɟɧ
ɉɪɢɭɩɪɚɜɥɟɧɢɢɨɬɞɜɭɯɩɭɥɶɬɨɜɧɟɭɫɬɚɧɨɜɥɟɧ
ɨɫɧɨɜɧɨɣɢɞɨɩɨɥɧɢɬɟɥɶɧɵɣɩɭɥɶɬ
ɉɪɢɭɩɪɚɜɥɟɧɢɢɨɬɞɜɭɯɩɭɥɶɬɨɜɨɞɢɧɢɡɩɭɥɶɬɨɜ
ɧɟɩɨɞɤɥɸɱɟɧ
ɉɪɢɭɩɪɚɜɥɟɧɢɢɨɬɞɜɭɯɩɭɥɶɬɨɜɧɢɨɞɢɧɩɭɥɶɬɧɟ
ɡɚɩɭɫɬɢɥɫɹɚɜɬɨɦɚɬɢɱɟɫɤɢɩɪɢɩɨɞɚɱɟɩɢɬɚɧɢɹ
ɂɫɩɨɥɶɡɭɟɬɫɹɨɞɢɧɦɧɨɝɨɠɢɥɶɧɵɣɤɚɛɟɥɶɜɦɟɫɬɨ
ɞɜɭɯɨɬɞɟɥɶɧɵɯɞɥɹɤɚɠɞɨɝɨɩɭɥɶɬɚ
ɇɟɢɫɩɪɚɜɧɨɫɬɶɰɟɩɢɭɩɪɚɜɥɟɧɢɹɅɨɫɫɧɟɣ
ɋɪɚɛɨɬɚɥɨɬɟɪɦɨɪɟɥɟɩɪɢɬɨɤ
ɋɪɚɛɨɬɚɥɨɬɟɪɦɨɪɟɥɟɜɵɬɹɠɤɚ
ɇɟɢɫɩɪɚɜɧɨɫɬɶɡɚɫɥɨɧɤɢ
Ⱦɟɣɫɬɜɢɟ
ȼɵɤɥɸɱɢɬɶ6:
Ɉɬɤɥɸɱɢɬɟɩɢɬɚɧɢɟɢɭɫɬɚɧɨɜɢɬɟɧɚɩɭɥɶɬɚɯ
ɩɟɪɟɤɥɸɱɚɬɟɥɢɨɫɧɨɜɧɨɝɨɢɞɨɩɨɥɧɢɬɟɥɶɧɨɝɨɩɭɥɶɬɚ
ɜɫɨɨɬɜɟɬɫɬɜɭɸɳɟɟɩɨɥɨɠɟɧɢɟ
Ɉɬɤɥɸɱɢɬɟɩɢɬɚɧɢɟɢɩɨɞɫɨɟɞɢɧɢɬɟ
ɜɬɨɪɨɣɩɭɥɶɬɭɩɪɚɜɥɟɧɢɹ
Ɉɬɤɥɸɱɢɬɶɩɢɬɚɧɢɟɢɩɨɞɚɬɶɫɧɨɜɚ
ɂɫɩɨɥɶɡɭɣɬɟɫɩɟɰɢɮɢɰɢɪɨɜɚɧɧɵɣɤɚɛɟɥɶ
Ɉɛɪɚɬɢɬɟɫɶɜɫɟɪɜɢɫɧɭɸɫɥɭɠɛɭ

69
14. Lossnay M-NET Remote Controller
(PZ-52SF-E)
14.1 Operation
CENTRAL
HEAT EX.
BY-PASS
AUTO
CHECK
INTERLOCKED
FILTER
ON/OFF
NOT AVAILABLE FILTER
[CENTRAL] Display
Displayed when remote operation is
prohibited by a centralised control unit, etc.
Power Display
Displayed while Lossnay remote controller
is powered on.
[FILTER] Display
Displayed when the accumulated operating
time reaches the time set for air filter
maintenance.
[CHECK] Display
Displayed together with the address of the
malfunctioning unit (3 digits) and the error
code (4 digits).
(For detail, refer to the “11.Troubleshooting”)
Operation lamp
On during operation. Flashes when a
malfunction occurs.
Ventilation Modes
Indicates the ventilation mode.
Heat recovery
(Heat exchange.)
By-pass
Automatic
(Heat ex./By-pass)
[NOT AVAILABLE] Display
Displayed when the Lossnay unit cannot
perform the function for the button that has
been pressed. This display flashes
concurrently with the display of the
unavailable function.
[ON/OFF] Button
Switches between run and stop. The lamp
on the button stays lit during operation.
[Fan Speed Adjustment] Button*
Used to select the fan speed of either "Low"
or "High".
[FILTER] Button
Press two times to reset the filter sign
display.
HEAT EX.
BY-PASS
AUTO
Low High
[INTERLOCKED] Display
Displayed when the Lossnay unit starts due
to interlocked indoor unit or external signal.
[Fan speed] Display
Displays the selected fan speed.
[Function Selector] Button
Used to select the ventilation mode from
among heat recovery (Heat exchange), by-
pass or automatic.
*Note:
●If this button is pressed when trying to
switch the fan speed of a Lossnay unit not
equipped with the fan speed adjustment,
the fan speed display and the “NOT
AVAILABLE” display flash and the fan
speed does not change.
This remote controller can not be used on Lossnay units set for interlocked operation
with Mr. Slim units.

70
14.2 Installing the Lossnay M-NET Remote Controller
14.2.1 Mount the switch box.
1. Install the switch box (purchased separately)as explained below.
Note:
●Be sure to install the switch box with the clearance shown in the illustration at
the left. (Check the space between the unit and any projections, such as a
stud.)
●Leave a space of 120 mm or more below the Lossnay M-NET remote controller
so that a screwdriver can be used.
2. Purchase the thin copper wiring conduit, lock nuts and bushings separately.
1. Pull out approximately 80 mm of cable from the wall and remove the insulation
at the end.
2. Use putty to seal the cable hole in order to prevent insects from damaging the
wiring and to prevent condensation on the Lossnay M-NET remote controller
circuit board. If this hole is not sealed well, the Lossnay M-NET remote con-
troller circuit board may be damaged.
3. Connect the cable to the terminal board at the bottom rear of the Lossnay M-
NET remote controller unit.
●The cable does not have polarity.
●When connecting stranded cable, hold down the tab on the terminal board
while inserting the cable.
●The cable connects to the main terminal board when it is inserted into the bot-
tom terminal.
●When disconnecting the cable, hold down the tab while pulling out the cable.
●After inserting the cable, slightly tug on it to check that it does not easily dis-
connect. If the cable is not securely connected, a short-circuit or malfunction
may occur.
4. Remove the Lossnay M-NET remote controller cover using a standard screw-
driver. Attach the Lossnay M-NET remote controller unit to the switch box
using the two enclosed cross-recessed pan head screws. Use a standard
screwdriver with a blade that is 4 mm or wider to remove the cover.
CAUTION:
●Forcing off the cover using a screwdriver that is less than 4 mm wide may
result in damage to the equipment or injuries.
●Attach the Lossnay M-NET remote controller to a level surface. Do not over-
tighten the screws. Tight screws could damage or deform the case.
Switch box
Outline of Lossnay
remote controller
Projecting
object such as
a stud
40 mm or more
11 10
80
Leading
wire Insula- tion
Sheath
Wall
Cable
Seal with putty
One switch box
(with cover)
Wiring plpe
Units : mm
Button:
Press here.
Insert the cable.
Lossnay M-NET remote
controller cover
14.2.2 Install the Lossnay M-NET Remote Controller.

71
5. Set the Lossnay M-NET remote controller address.
Set the Lossnay M-NET remote controller address using the rotary switches
SW1 and SW2 on the front of the Lossnay M-NET remote controller.
■Setting range: 101 to 200
●Rotary switch SW1 indicates the tens column and SW2 indicates the ones
column. In addition, 100 is automatically added to the setting as shown
below.
The address is set to 01 when the Lossnay M-NET remote controller is
shipped from the manufacturer.
CAUTION:
The address must be set if the Lossnay M-NET remote controller is to be used
as a part of a multi-unit system. Set the address according to its position in
the system. In addition, refer to page 59 for more information concering the
setting of the addresses.
6. After setting the Lossnay M-NET remote controller address, attach the
Lossnay M-NET remote controller cover.
When attaching the Lossnay M-NET remote controller cover, set the top of the
cover onto the two top hooks and then push in the at the bottom of the cover
until it snaps into place.
If the bottom of the cover is attached first, the top of the cover cannot be
attached. Forcefully pushing in the top of the cover to attach it may break the
hooks.
0
9
8
7
6
5
4
3
2
1
SW1
0
9
8
7
6
5
4
3
2
1
SW2
Rotary switches
Rotary switch setting 01 – 99 00
Lossnay M-NET remote controller address 101 – 199 200

72
14.3 Registering the Lossnay Unit with the Lossnay
M-NET Remote Controller
Initial registration mode operation
A Lossnay unit must be registered with the Lossnay M-NET remote controller in a group arrangement. Register a Lossnay unit
using the initial registration mode as shown below. In addition, the initial registration mode can be used to search for a Lossnay
unit registered to the group or to delete a registration.
Setting Procedure
1Turn off the unit.
(Perform the following operation after “HO” flashes on the display.)
2Hold down both and for more than 2 seconds.
This starts the initial registration mode and the set Lossnay M-NET remote controller address flashes on the display.
FILTER
CENTRAL
HEAT EX.
BY-PASS
AUTO
CHECK
INTERLOCKED
FILTER
ON/OFF
NOT AVAILABLE FILTER
3
52 17
4
6
3Press to select the address of the Lossnay unit that you wish to register with this Lossnay M-NET remote controller.
After the button is pressed once, the Lossnay M-NET remote controller address and then the Lossnay unit
address is displayed. Afterwards, each press of the button increase the Lossnay unit address by 1 as shown
below. Holding down the button changes the address more quickly.
[101][
–––
][
001][ 002]. . . [098][ 099]
(Set Lossnay M-NET remote controller address)
Flashes
4When the address of the Lossnay unit that you wish to register is displayed, press to begin registering.
If the registration is completed correctly, the display appears as shown below.
If the registration is not completed correctly, “ ” flashes in the display. Check that the selected Lossnay unit address and
the wiring are correct.
In the case of LGH-150/200RX3-E, there are 2 circuit boards installed in each unit. Because of this, set a separate address
for each of the circuit boards, and register both of those addresses at the remote control.
5After registering, hold down both and for more than 2 seconds to end the initial registration mode and the nor-
mal display appears.
FILTER
The Lossnay unit type,
“LC”, is displayed.

73
Confirmation of registered address
6To display the addresses of the Lossnay units that are registered with this Lossnay M-NET remote controller.
Each press of in step 2or 4displays the address of a registered Lossnay unit and its type, “LC”.
If no Lossnay unit is registered, “ ---” appears in the address display and no type is displayed.
Address deletion
7To delete the address of a Lossnay unit registered with this Lossnay M-NET remote controller.
Hold down [ON/OFF] twice for 2 seconds each time in either step 4or after the registration is completed to delete the regis-
tration of the Lossnay unit that is currently displayed.
FILTER
When the display appears as shown above, hold down [ON/OFF] for 2 seconds each time.
If the registration is deleted correctly, “––”appears in the display.
If the registration is not deleted correctly, “ ” flashes in the display. Check that the select-
ed Lossnay unit addresses and the wiring are correct.
Note:
●In the case of LGH-15 to 100RX3-E, up to 16 Lossnay units can be registered. In the case of LGH-150/200RX3-E, up to 8
units can be registered.
●If the registration cannot be completed or deleted correctly, either the set address or the wiring of the Lossnay unit whose
registration you wish to add or delete may be incorrect. Check the wiring and the address that is set.