
Safety instructions P24 DC, P28 DC, S25 DC
6
zThe cooling device is not suitable for transporting caustic mate-
rials or materials containing solvents.
ezConnect the device with the 12 V lead supplied to a 12 V socket.
zDo not pull the plug out of the cigarette lighter or the socket by
the cable.
zIf the connection cable is damaged, it must be replaced with the
cable of the same type and specifications.
zPull out the connection cable:
– Before cleaning and maintenance
– After use
zOn boats: if the device is powered by the mains, ensure that the
power supply has a ground fault interrupter circuit. Danger of
fatal injuries!
zDisconnect the cooling device and other power consuming de-
vices from the battery before connecting the quick charging de-
vice.
zCheck that the voltage specification on the type plate corres-
ponds to that of the energy supply.
1.2 Operating the device safely
azBefore starting the device, ensure that the power supply cable
and the plug are dry.
zDo not place the device near naked flames or other heat
sources (heaters, direct sunlight, gas ovens etc.)
zCaution! Danger of overheating!
Ensure at all times that there is sufficient ventilation so that the
heat that arises during operation does not build up. Make sure
that the device is sufficiently far away from walls and other ob-
jects so that the air can circulate.
zDo not fill the inner container with ice or fluid.
zNever immerse the device in water.
zProtect the device and the cable against heat and moisture.
zA few water drops may form inside the cooler if it has been cool-
ing for a lengthy period. This is normal because the moisture in
the air condenses to water when the temperature in the cooler
falls. The cooler is not defective. Wipe it out with a dry cloth if
necessary.
_P24_P28_S25_DC.book Seite 6 Dienstag, 21. April 2009 1:55 13