Mocka Sonata User manual

mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008
ASSEMBLY I N S TRUCTION S
Sonata
Bunk Bed
Thank you for your purchase.
Please follow the instructions below for correct assembly
WARNING: Falls from elevated beds can be fatal and deaths have occurred
where children have fallen from elevated beds. This is relevant for all ages.
The risk is greater for younger children.
The risk of injury or death from a fall from an elevated bed compared to a
non-elevated bed is:
10x greater for 7-8 year olds
7x greater for 9-10 year olds
3x greater for 11-12 year olds
IMPORTANT STATEMENT
1. Children should be discouraged from playing on the bunk bed.
2.The bunk bed should be checked periodically to ensure that the guard-
rail, access device and other components are maintained in the correct
position and state of repair and that all connectors are tight.
WARNING: THE UPPER BUNK MUST BE MORE
THAN 2 METRES FROM ANY CEILING FAN WARNING: TOP BUNKS AND ELEVATED BEDS ARE DANGEROUS AND
ARE NOT RECOMMENDED FOR CHILDREN UNDER THE AGE OF 9
LIFT THE BED INTO PLACE, DO NOT DRAG, AS THIS CAN CAUSE DAMAGE
A B C D
medium
bolt x4
plug
x24
small
bolt x19
allen
key x2
E F
nut
x2
large
bolt x2
Hardware Supplied

Attach panels [3] to panel [1] and [4] using 8x small bolts (A) and tighten
with the allen key (D).
Attach panels [2] and [6] to panel [1] and [4] using 11x small bolts (A) and
tighten with the allen key (D).
1
Sonata
mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008
ASSEMBLY I N S TRUCTION S
2
Bunk Bed
2
A
4
3
1
3
A
A
A
A
A
A
A
3
1
A
D
A
D
6
2
4
1
3
A
A
A
A
A
A
A
A
A
A
A
A
D
2
1

Sonata
Bunk Bed
mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008
ASSEMBLY I N S TRUCTION S
Attach slats [5] to the top panels [2] and [6]. Do this by sliding the bracket on the slat behind
the bracket on both panels [2] and [6], then secure into place with 12x plugs (C) on each panel.
The same method for attaching slats to the bottom panels [3].
3
C
C
C
C
C
C
C
C
C
C
C
C
5
6
5
C
2
C
3
2
5
C
C
C
C
C
C
C
5
C
3
position
below
When you fix the slats, please pull the slats as
shown below and make sure the two brackets
are tight. Then insert the plugs into the holes on
the brackets to lock the two brackets together.
Please ensure the plugs are fully inserted through
the two brackets making sure the brackets lock
together before use.
C
5

mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008
ASSEMBLY I N S TRUCTION S
Sonata
Bunk Bed
5 6
Attach the ladder [7] to panel [6] using 2x large bolts (F) and secure with
2x nuts (E) as shown. Tighten with the allen key (D).
Attach the handles [8] to panels [6] and [1] as shown using 4x medium bolts (B)
and tighten with the allen key (D). Once assembled lift bunk bed into place,
do not drag. You’re done, enjoy!
8
7
1
6
67
6
B
D
B
D
18
8
E
F
E
F
F
E