Mocka Balley User manual

Balley Mesh Bouncer
1
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Thank you for your purchase.
Please follow the instructions below for correct assembly.
Please read this manual before you start using the product to see all
its functions and use them in accordance with intended use. If you
use the product at variance with the manual, it may pose a threat to
your child!
WARNING: Fall hazard: Babies have suffered skull
fractures falling while in and from bouncers.
Use bouncer ONLY on floor
ALWAYS use restraints and adjust to fit snugly, even if baby fall
sleep
Suffocation hazard: Babies have suffocated when bouncers
tipped over on soft surfaces.
To prevent falls and Suffocation
ALWAYS use restraints and adjust to fit snugly, even if baby falls
asleep
STOP using bouncer when baby starts trying to sit up or has
reached 9kg, whichever comes first.
The bouncer may be used by infants/babies and small children
(0+).
Do not use the reclined cradle once your child can sit unaided.
The maximum weight of the child or which the reclined cradle is
intended is 9kg.
It is dangerous to usethe reclined cradle on an elevated surface,
e.g. a table.
Never use the product on a soft surface (e.g. bed, sofa, pillow)
because the product may collapse and cause the child to
suffocate. Position the product on a flat and stable surface.
Only adults are allowed to assemble the bouncer.
Never leave the child unattended.
Never lift or move the bouncer if the child is inside. Do not adjust
and do not modify the product if the child is inside.
If your baby needs sleep, he or she should be placed in an
appropriate cot or bed.
Never use the toy barto carry the reclined cradle.
This reclined cradle is not intended for prolonged periods of
sleeping
Always use the restraint system.
Do not let other children play with the bouncer.
Do not use the product as a child restraint in the car!
Do not use the product near stairway.
Do not repair the product on your own and do not make any
modifications to it. Only an authorized service center is allowed to
perform these operations.
Assemble and disassemble the product away from children.
Do not place items which may pose a threat to a child in the
bouncer
Do not cover the bouncer with items which may prevent airflow or
pose a threat to a child.
Keep instructions for future use.
Do not use this infant bouncer seat if it is damaged or broken.
Do not place the bouncer with a child near drapes or electric wires
because they lead to suffocation risk and electric shock risk.

Balley Mesh Bouncer
2
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Before every use or assembly, check the bouncer for any
damage, loose connections, missing elements or sharp edges.
It is forbidden to use the product if any components are missing or
damaged. This being the case, please contact the manufacturer's
service center.
Do not use accessories or spare parts other than supplied by the
manufacturer.
Do not use product for other purposes than designed.
The product contains wooden elements - use and store the
product away from fire, sources of heat, moisture and liquids.
How to clean and maintain
You can wash minor stains on the cover with a sponge and mild
detergent (e.g. soap). As for more stubborn stains, the bouncer cover
may be removed (see: How to remove the cover) and manually
washed at the temperature of max. 30°C with the use of a mild
detergent. Do not use the bleach or other strong ammonia-based
chemicals. Do not wash in the washing machine and do not dry off
mechanically. Wet cover must be left until it dries off, in an aired
room, away from sunlight which may cause it to fade.
The frame and plastic elements may be washed with a wet cloth and
mild detergent. Wipe them dry with a cloth after washing.
Do not use the product at variance with its intended use. Store the
bouncer in a dry place, away from moisture.
Regularly check the bouncer for potential damage to the cover or
frame. Do not use the equipment if any of its parts is damaged or
missing. Do not use accessories other than supplied by the
manufacturer as they may invalidate the guarantee.

3
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Balley Mesh Bouncer
1
A
Hardware Supplied
screw
x2
B
allen key
x1
20mm
x2
A
B
Attach 1 x Seat Frame (A) to 1 x Seat Cover (B).

2
4
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Balley Mesh Bouncer
3
Secure as shown with 2 x screws (A). Tighten with an Allen Key (B).
② Put on the frame into
the base.
③ Asseable the screw on
bothsides
④ Open the harness by pressing
the sides of the buckle
⑤ Tighten the harness by
pulling the straps