Mocka Sail Boat Toy Cart User manual

Sail Boat Toy Cart
1
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Thank you for your purchase.
Please follow the instructions below for correct assembly.
A
Hardware Supplied
long screw
x4
D
small screw
x2
E
screw
x2
F
pole
x2
B
dowel
x4
Phillips & Flathead screwdrivers required.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
C
medium screw
x2
WARNING: Due to the small size of the hardware and the sharp points
of the screws, they are potentially hazardous.
Keep all assembly parts and packaging materials out of reach of
children.
Retain packaging information for future reference
The toy must be assembled by an adult. When using the toy, adult
supervision is required. Check the toy regularly for loose or broken
parts. Use the cart on a level surface, away from the road and
obstacles.
Recommended age 12 months +

12
Sail Boat Toy Cart
2
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Insert 2 x dowels (F) into panels [1] and [2] as shown. Attach panels [5]
and [6] to panels [1] and [2] and secure with 2 x screws (E) and 2 x
small screws (D). Tighten with a screwdriver,
Insert 2 x dowels (B) into panels [3] and [4] as shown. Attach panels [8],
[3] and [4] to assembled frame and secure with 1 x medium screw (C)
and 2 x large screws (A). Tighten with a screwdriver.

3
3
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Slide panel [7] into position as shown. Insert 2 x dowels into assembled frame as shown. Attach side as
shown and secure with 1 x medium screw (C) and 2 x large screws (A).
Tighten with a screwdriver.
Sail Boat Toy Cart
4

5
4
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Sail Boat Toy Cart
6
Tie panels [9] to assembled frame as shown. You’re done, enjoy!