Mocka Dakota Nine Cube Shelf User manual

Dakota Nine Cube Shelf
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
1
Wall Strap
washer
x2
Y
wall
anchor
x1
X
safety
strap x1
WV
wall
screw
x1
WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
Allen Key
x1
A B C
D
Hardware Supplied
bolt
bolt
x24
x8
screw
x24
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
Phillips
E
screw
x6
Maximum weight limit per shelf is 10kg
Indoor Use Only

Dakota Nine Cube Shelf
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
2
Panel Layout
3
1
3
4
3
4
3
3
3
3
3
2
3
2
3
2
3
5
3
53
5
3
5
3
5
3
5
3
5
3
5
3
5
3
53
5
3
5
3
6
3
6
3
6
3
6
3
6
3
6

Dakota Nine Cube Shelf
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
3
1x3 x8
2
Attach panels [6] to panel [2] with 8x screws (B).
Tighten with a screwdriver.
Attach 1x bolts (D) to panel [5] as shown.
3
6
3
6
3
2
B
B
B
B
B
B
B
B
3
5
D
D
short
long

Dakota Nine Cube Shelf
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
4
3 4
Attach panels [5] together to panel [2] as shown. Attach panels [5] together to panel [2] as shown.
Note:Use panel [5] with
bolt (D) installed.
3
2
3
2
3
5
3
5
3
5
3
5
3
5
3
5
3
5
3
5
3
5
3
5
3
5
3
5
3
5
3
5
3
5
3
5

Dakota Nine Cube Shelf
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
5
65
Attach panels [4] to panels [5] with 4x bolts (A). Tighten
with an Allen Key (C).
Attach panel [2] to panels [5] with 4x bolts (A) as shown.
Tighten with an Allen Key (C).
A
A
A
A
3
2
3
5
3
5
3
5
3
5
3
4
3
4
A
C
A
A
A
AC

3
3
C
A
A
A
A
A
A
A
A
A
C
Dakota Nine Cube Shelf
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
6
7 8
Attach panel [3] to panels [2] and [4] with 8x bolts (A). Tighten
with an Allen Key (C).
Attach panel [3] to panels [2] and [4] with 8x bolts (A). Tighten
with an Allen Key (C).
3
3
3
2
3
2
3
2
3
4
3
4
A
A
A
A
A
A
A
A
3
2
3
2
3
2
3
4
3
4

Dakota Nine Cube Shelf
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
7
9 10
Attach panel [1] to panels [4] with 6x screws (E), 1x safety strap (V)
and 1x washer (W). Tighten with a screwdriver.
Once assembled lift furniture into place, do not drag. Use a
drill to create a small hole lining up with the top of the safety
strap (V). Fasten to the wall using 1x washer (W) , 1x wall
anchor (X) and 1x wall screw (Y). Ensure the unit is balanced
and steady before use. You’re done, enjoy!
3
1
X
Y
W
V
wall
anchor
screw
strap
washer
E
E
E
E
E
3
4
3
4
WV
E