Mocka Mischa User manual

Mischa Console Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
Hardware Supplied
dowel
x12
bolt
x14
screw
x8
locking
nut x14
small
screw x20
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
1
A B CD E
NM
L
K
J
I
HG
F
wedge
x4
screw
x4
long screw
x6
Wall Strap
Z
Y
XWV
slide rail
x2
slide rail
x2
safety
strap
x1
screw
x1
wall
anchor
x1
wall
screw
x1
washer
x2
washer
x8
slide rail
x2
slide rail
x2
O
handle
bolt x4
handle
x2
P Q R
felt
pad x4
Allen key
x1
long bolt
x8
WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
Phillips & Flathead screwdrivers
and hammer required

Mischa Console Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
2
12
Attach 1x slide rail (F) to panel [3] and secure with 3x small screws (E).
Attach 1x slide rail (G) to panel [4] and secure with 3x small screws (E).
Tighten with a screwdriver.
3
4
5
5
Attach 1x slide rail (F) to panel [5] as shown with 3x small screws (E).
Flip the panel [5], attach 1x slide rail (G) to panel [5] as shown
with 3x small screws (E). Tighten with a screwdriver.
G
CR
E
G
CR
E
F
CL
E
F
CL
E
E
E
E
F
F
G
G
E
E
E
E
E
E
E
E
E
FLIP

Mischa Console Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
3
3 4
Attach panels [3], [4] and [5] to panel [1] with 6x dowels (A) and
secure with 6x locking nuts (D). Tighten with a screwdriver.
3
4
1
1
5
Insert 6x bolts (C) to panel [1].Tighten with a screwdriver.
C
C
C
C
C
C
A
A
A
D
D
D
D
A
A
A
D

Mischa Console Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
4
6
3
3
4
4
6
5
2
5
Slide panel [6] down along the grooves between the panels [3] and [4]. Attach panel [2] to the unit with 6x dowels (A) and secure with 6x long
screws (M). Tighten with a screwdriver.
M
M
A
M
M
A
M
M
A
A
M

Mischa Console Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
5
78 Drawer x 2
Attach Legs [10] to panels [2] with 8x washers (Q) and 8x long bolts (R).
Tighten with the Allen key (J). Attach 4x felt pads (P) to the ends of the legs.
Insert 4x bolts (C) into panel [11].Attach panels [7] and [12] to panel
[11] and secure with 4x locking nuts (D). Tighten with a screwdriver.
Slide panel [8] along the grooves between the panels [7] and [12] to
form the base of the drawer.
J
Q
R
P
P
P
P
CC
CC
DD
D
D
3
10
3
10
3
11
3
11
3
12
3
7
3
7
3
8
3
12
3
10
3
2
3
10

Mischa Console Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
6
109 Drawer x 2
Attach panels [7], [9] and [12] as shown using 4x screws (B). Tighten
with a screwdriver. Attach slide rail (I) and slide rail (H) to the underside
of the side panels as shown. Secure with 4x small screws (E) and tighten
with a screwdriver. Attach 1x handle (O) to panel [11] and secure with 2x
handle bolts (N).Tighten with a screwdriver.
Insert the assembled drawers into the corresponding compartments
as shown. Ensure the drawers slide easily along the rails.
E
H
I
E
E
E
B
B
BB
N
N
O
3
11
3
7
3
9
3
12
3
7
3
12

6
Mischa Console Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
7
11 12
Attach 4x wedges (K) into the corners of the back of the unit and secure
with 4x screws (L). Tighten with a screwdriver.Attach 1x safety strap (V)
to the top of the back side of the unit as shown using 1x washer (Z) and
1x screw (W). Tighten with a screwdriver.
Once assembled lift furniture into place, do not drag. Use a drill to create
a small hole lining up with the top of the safety strap (V). Fasten to wall
using 1x washer (Z), 1x wall anchor (X) and 1x wall screw (Y). Ensure
unit is balanced and steady before use. You’re done, enjoy!
V
K
L
Z
W
X
Y
Z
wall
anchor
screw
strap
washer
V
Z
W