Mocka Jack Coffee Table User manual

1
Jack Coffee Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
Phillips & Flathead screwdrivers required.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
bolt
x21
screw
x16
screw
x9
A B C D E F
GHJKL
M
I
Hardware Supplied
dowel
x16
screw
x40
slide
rail x4
slide
rail x4
slide
rail x4
slide
rail x4
locking
nut x21
cam bolt
x8
handle
x4
N
Allen key
x1
O P
small bolt
x16
small locking
nutx16
long
screw x10
Q
long dowel
x2
WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.

Jack Coffee Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
2
12x2
Insert 9x bolts (C) into panel [1]. Tighten with a screwdriver. Attach 1x slide rails (F) and 1x slide rails (G) to panel [3] and secure
with 4x screws (E). Insert 3x bolts (C) to the panels [3]. Tighten with
a screwdriver.
E
F
CL
E
G
G
F
CR
C
C
CC
C
CC
C
C
C
C
C
E
E
E
E
1
3

Jack Coffee Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
3
34
Attach 2x slide rails (F) and 2x slide rails (G) to panel [4] and secure
with 8x screws (E). Insert 6x bolts (C) to the panel [4]. Tighten with
a screwdriver.
Attach panels [5] to panel [4] with 2x long dowels (K) and secure
with 6x locking nuts (D). Tighten with a screwdriver.
E
F
CL
E
F
CL
G
G
F
F
E
G
CR
E
G
CR
FLIP
C
C
C
C
C
C
E
EE
E
E
E
E
E
4
5
5
4
4
D
D
D
D
K
D
D
K
D

Jack Coffee Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
4
56
Attach panel [3] to panel [5] with 2x dowels (A) and secure
with 3x locking nuts (D). Tighten with a screwdriver.
Attach panel [3] to panel [5] with 2x dowels (A) and secure
with 3x locking nuts (D). Tighten with a screwdriver.
3
3
5
5
A
A
D
D
D
D
D
D
A
A

Jack Coffee Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
5
78
Attach panel [2] to panels [3] and [4] using 6x dowels (A) and secure
with 9x screws (B) as shown. Tighten with a screwdriver.
Attach panels [6] to the panels [7] with 8x cam bolts (J) and tighten
with a Allen key (N).
JN
J
J
J
B
B
B
B
B
B
B
B
B
A
A
A
A
3
3
2
46
6
7
7
JN